• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.242-242
• /
• 2006

Increasingly complex tasks are performed by computers or cellular phone, requiring more and more memory capacity as well as faster and faster processing speeds. This leads to a constant need to develop more highly integrated circuit systems. Therefore, there have been numerous studies by many engineers investigating circuit patterning. In particular, PCB including module/package substrates such as FCB (Flip Chip Board) has been developed toward being low profile, low power and multi-functionalized due to the demands on miniaturization, increasing functional density of the boards and higher performances of the electric devices. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. The imprint technique. is one of promising candidates, especially due to the fact that the expected resolution limits are far beyond the requirements of the PCB industry in the near future. For applying imprint lithography to FCB, it is very important to control thermal properties and mechanical properties of dielectric materials. These properties are very dependent on epoxy resin, curing agent, accelerator, filler and curing degree(%) of dielectric materials. In this work, the epoxy composites filled with silica fillers and cured with various accelerators having various curing degree(%) were prepared. The characterization of the thermal and mechanical properties wasperformed by thermal mechanical analysis (TMA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), rheometer, an universal test machine (UTM).

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.127-133
• /
• 2001

With an objective of evolving quantitatively and qualitatively superior bivoltine breeds/hybrids of silkworm Bombyx mori L. for tropical conditions, breeding work was initiated in Central Sericultural Research and Training Institute, Mysore during 1992 by utilizing two Japanese hybrids namely BNl8$\times$BCS25 and Shunrei$\times$Shogetsu along with Indian evolved breed, KA. The breed CSR12 which is characterized with sex-limited larval marking and white oval cocoons was evolved from the Japanese hybrid BNl8 ${\times}$ BCS25 by crossing with KA, while the breed CSR6 which is characterized with normal marking (marked larvae) and white dumbbell cocoons was extracted from the Japanese commercial hybrid Shunrei${\times}$Shogetsu through continuous inbreeding coupled with selection. After fixation, these breeds along with other newly evolved breeds were subjected to hybrid study under optimum environmental conditions in the laboratory for expression of full potential of the genotypes. These hybrids were evaluated by Multiple Trait Evaluation Index (Mano et al., 1993). The hybrid CSR12${\times}$CSR6 was selected based multiple trait evaluation index value. The hybrid CSR12$\times$CSR6 recorded survival of 96.0%, shell weight of 50.0 cg, shell ratio of 24.3%, raw silk percentage of 19.6, filament length of 1,216 m, boil off loss of 22.4% and renditta of 5.1. On the other hand, the control hybrid (KA ${\times}$ NB4D2) has recorded survival of 90.6%, shell weight of 42.1 cg, shell ratio of 20.4%, raw silk percentage of 15.9, filament length of 999 m, boil off loss of 24.8% and renditta of 6.3. The hybrid CSR12$\times$CSR6 was authorized during 1997 by Central Silk Board, Government of India for commercial exploitation during favourable months based on national level race authorization test.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3747-3756
• /
• 2012

This paper examines the effect of price ceiling regulation on the new apartment price. The analysis procedure of the study is divided into two parts, which stand for a case study on the effect of price control on the new apartment price and the survey of real estate experts on price ceiling regulation. The empirical results of our case study show that the selling price under price ceiling regulation is generally lower than that in the situation of price deregulation, in terms of the land development expense and construction cost. With regard to the survey results, more than half of respondents have opinions that price ceiling regulation has an impact on the new apartment price and lowers the price. They are equally divided pro and con regarding the problem of keeping or discarding the regulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.360-367
• /
• 2009

In this paper, we propose a design methodology of IEEE 802.11n MAC which aims to achieve the higher throughput of more than 100Mbps in downlink as measured at the MAC-SAP and present the implementation results of MAC using the proposed design methodology. With our proposed methodology, different from the conventional design flow which has the separate codes for the protocol validation, for the network simulation, and for the system implementation, the unified code can be used for the network simulation and the implementation of software and hardware. Our MAC architecture is partitioned into two parts, Upper-layer MAC and Lower-layer MAC, in order to achieve the high efficiency for the new features of IEEE 802.11n standard. They are implemented in software and hardware respectively. The implemented MAC is tested on ARM based FPGA board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.239-247
• /
• 2007

In this paper, we propose a system that the Linux is ported in embedded system with peripheral devices of CIS(CMOS Image Sensor) and GPS module. The system acquires GGA sentence from GPS module by recognizing camera and GPS is used module in Linux kernel. And then the received location information is used to include still image acquired through CIS According to this paper, We compose hardware for embedded system, attach board (including camera), port Linux BootLoader and Kernel. And. then we realize that it insert kernel in CIS control device driver and GPS module device driver.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1858-1865
• /
• 2007

In this paper, we introduce the design and implementation of satellite IP modem. The designed satellite IP modem shows the performance of 0.2% overhead, BER=10-5 when Eb/No=6dB, frequency offset of 8KHz, data rate up to 1536Kbps, $F_{if}=140MHz$. The designed system is verified through software simulation and then implemented with MPC86x communication processor, TMS320C6416 DSP, and Altera FPGA. Since each hardware unit is implemented in daughter board for modularity, we can reduce the development time and easily improve the performance with using better processor. Linux is used for embedded OS because it shows better performance in IP manipulation multitask processing, and hardware control through device driver. The implemented system is tested and verified with channel simulator. Since the proposed IP modem shows small size and light weight, that can be used anywhere with easy if you need IP environment.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.293-300
• /
• 2008

Efficient designing of SRM Grains in the field of Rocketry is still the main test for most of the nations of world for scientific studies, commercial and military applications. There is a strong need to enhance thrust, improve the effectiveness of SRM and reduce mass of motor and burning time so as to allow the general design to increase the weight of payload/on board electronics. Moreover burning time can be increased while keeping the weight of the propellant and thrust in desired range, so as to give the time to control / general design group in active phase for incorporating delayed cut off if required. A mathematical design, optimization & analysis technique for Slotted Tube Grain has been discussed in this paper. In order to avoid the uncertainties that whether the Slotted Tube grain configuration being designed is best suited for achieving the set design goals and optimal of all the available designs or not, an efficient technique for designing SRM Grain and then getting optimal solution is must. The research work proposed herein addresses and emphasizes a design methodology to design and optimize Slotted Tube Grain considering particular test cases for which the design objectives and constraints have been given. In depth study of the optimized solution have been conducted thereby affects of all the independent parametric design variables on optimal solution & design objectives have been examined and analyzed in detail. In doing so, the design objectives and constraints have been set, geometric parameters of slotted tube grain have been identified, performance prediction parameters have been calculated, thereafter preliminary designs completed and finally optimal design reached. A Software has been developed in MATLAB for designing and optimization of Slotted Tube grains.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.536-537
• /
• 2014

In this paper, it suggested Android smart phone application for users who want to find valley at summer. To provide correct information, we used Korea Tourism Organization's tourism information database and to provide tourism information and map service at once we linked Naver map. Search valley application can search valley by using country's region name and keyword by using map and GPS. we can find restaurants accomodations around your location. we can get restaurants and accommodations by control distance so we can get phone number, pictures and detail information about searched data. Also, you can bookmark valley where you want to go and you can search of delete bookmarked valley whenever you want. you can share opinion by writing postscribe about the valley where application user went. for developer and users amicable communication we made Q&A board.

• Korean Journal of Community Nutrition
• /
• v.24 no.3
• /
• pp.183-196
• /
• 2019

Objectives: College is an important time for students to establish their identity as an independent subjects and develop a foundation to maintain a healthy adulthood. However, after female students become college students, their eating habits are likely to become more irregular and they may experience various health problems because of excessive weight control. Therefore, this study was conducted to investigate the dietary behaviors and blood clinical indices of female college students by residence types. Methods: A total of 374 subjects were classified as home group, self-boarding group or boarding group according to residence type. Dietary habits, frequency of food intake, and eating attitudes were examined through questionnaires and anthropometric measurements and blood clinical indices were analyzed. Results: The meal most frequently skipped by female college students was breakfast, and the frequency of skipping breakfast was significantly lower in the home group than other groups. Most college students recognized that their eating habits had worsened since becoming college students, with the self-boarding group in particular feeling that their eating habits changed negatively. The consumption frequencies of protein foods, fruits, dairy products, seaweed, and fatty meats were significantly lower in the self-boarding group than other groups. The home group ate food cut into smaller pieces, while the self-boarding group tried new and rich foods. Residence types did not affect blood clinical indices. Conclusions: The self-boarding group had inadequate dietary habits compared to the home group. Although residence type did not affect the blood clinical indices, the students still had poor dietary habits. Therefore, proper nutrition education is needed to improve the nutritional status of college students, especially those that self-board.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.321-326
• /
• 2021

Wireless communication is a core technology constituting the Internet of Things (IoT), but there is no suitable educational equipment to learn various wireless communication technologies used in the Internet of Things through practice. This paper deals with the development of advanced education and training equipment that can perform various IoT wireless communication practices. It uses an Arduino mega board as a device to control various sensors. As wireless network technologies to send and receive the sensing date wirelessly, it makes use of RFID/NFC and Bluetooth among WPAN technologies, WiFi among WLAN technologies and LoRa and 2.4GHz wireless transceiver among WWAN technologies. In addition, GPS, infrared communication, I2C communication, and SPI communication are organized so that various IoT wireless communication technologies can be learned through practice. In addition, since the educational equipment developed in this paper is equipped with two devices, it is designed to perform transmission and reception experiments for wireless network technology within the equipment.