• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.153-158
• /
• 2008

It compared subcontractor with contractor that are wages, the labor hour and labor condition of the work environment back are inferior relative. The subcontractor which basically the contract workers evade the dangerous process or the difficult work, the dirty work back what is called 3D the case which does to keep a business is many. so With life it will be threatened consequent health directly. The possibility where the subcontractor will be exposed to danger work came to be high. Consequently it prevents the subcontract which danger work is insensitive from this research and immediacy of the subcontract workers who is weak hygiene circumstance complement the plan it will be able to secure the immediacy safety&health subcontract workers, substantially to prepare in the hazard subcontract proprietor. Thus, this paper aims at presenting countermeasures to substantially secure safety and health of subcontractors by preventing ill-advised subcontracting of harmful and hazardous operations and imposing partial occupational safety and health responsibility to employers to enhance safety and health environment of subcontractors.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.1063-1068
• /
• 2000

Latex modified concrete (LMC) has grown to be accepted as a standard material of construction overlaying bridge decks in America due to its superior physical and chemical properties. The properties of latex, combined with the low water-cement ratio, produce a concrete that has improved flexural, tensile, and bond strength, lower modulus of elasticity, increased freeze-thaw resistance, and reduced permeability compared to conventional concrete of similar mix design. LMC overlays have been service in excellence for 30 years on thousands of bridge in U.S.A. This may, also, prolong the life cycle of bridge deck once it is adopted in Korea. The self-contained, mobile, continuous mixer is most appropriate particularly for concrete quality assurance. Assuring quality on a bridge deck overlay project should begin in the design phase and continue after the construction is completed. Quality should be the concern of everyone involved-owner, designer, and contractor.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.51
• /
• pp.6-11
• /
• 2010

탄탄한 기술력과 경험을 바탕으로 지난 5년가 연평균 20% 이상의 괄목할만한 성장을 해왔던 한화건설. 작년에는 수주 4조원을 돌파하고 매출 2조 3천 5백억원을 달성해 시공능력 11위로 뛰어올랐으며, ENR지가 발표한 Global Contractor 108위에 등극해 명실상부한 글로벌 건설회사로 자리매김했다. 이러한 한화건설에게 2010년은 더욱 잊지 못할 한 해가 될 것 같다. 7,400억원 규모의 대규모 민자사업인 제3경인고속도로를 주간사로 나서 성공리에 개통시켰으며 하반기에도 2,000억 규모의 '국군정보사령부 이전사업'과 375억 규모의 '경남창원과학연구복합파크' 사업을 연이어 수주하는 등 공공사업 수주 1조클럽 가입을 눈앞에 두고 있는 것. 올해 유독 심해진 경기 침체 속에서 꾸준한 성장을 이루고 있는 한화건설의 이근포 사장을 한국건설시술협회 한경보 회장이 방문해 비결과 전략에 관한 대담을 나누었다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.467-473
• /
• 2011

The contractor management for the effective defense project is essential factor in the modern defense acquisition task. The occurrence of unlawful company causes hastiness for project manager and setback to the deployment of defense weapon system. In this paper, we develop a prediction model for the effective defense project by using the discriminant analysis and analyse the variables that discriminate the unlawful company in many variables. It is expected that our model can be used to improve the project management capability of defense acquisition and contribute to the establishment of efficient procurement procedure through entry of the reliable defense manufacturer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.123-124
• /
• 2015

The project participants make use of floats for their benefits. The owner may consume floats in an event of issuing change order(s) and may avoid the risk factors attributed by them; the contractor may reduce activities' costs by substituting the activity with alternative construction method and by leveling the resources, hence consuming floats. There are a lot of disputes and claims involved in the float ownership issue. The ownership of floats should be stipulated in the contract stage. To alleviate these disputes and claims, it is commendable to develop a computational method that quantifies the float value. This paper presents the method that computes the values of total floats which changes over the project life span. The system calculates CPM, compute the ratio of area of banana curve which is enclosed by earliest start curve and latest start-curve.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.140-141
• /
• 2018

Protective coatings at nuclear power plants should be designed to withstand exposure to ambient conditions during normal operation or design-basis accidents. However, there was a change in the perception of the protective coating to the revision of the Regulatory Guidelines by the NRC in July 2000. In other words, maintenance guidelines have been strengthened in order to minimize the clogging of the cooling water system due to the substances in the containment building. Therefore, KHNP, the contractor and operator of the nuclear power plant, plans to develop the coating system for nuclear power plants in accordance with the regulation, and plans to develop its own coating expert.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.65-67
• /
• 2014

There are many elastomeric joint sealant applications in construction such as structural glazing, weatherproofing and insulating glass fabrication etc. Each sealant joints require unique durability functions to perform well through building life cycle. Elastomeric joints in bathroom and kitchen is one of areas which require durable sealing. In this application, anti fungal durability is proprietary function of sealant during building life cycle. Premature failure of anti fungus resistance of sealant is putting big stresses to general contractor as well as the inhabitants due to costly rework and poor sanitation. Accordingly, when chemists design a product, they must take into account various parameters not only formulation components also test conditions in order to have long term fungal durability. This paper reviews several biocide options with various industry standards for fungus resistance performance to suggest making new test method for construction sealant industry.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.5
• /
• pp.177-190
• /
• 2006

Construction projects are facing delay problems. Delays in construction have been immense effect on performance or satisfactory delivery of the project. Delays have been causing project cost overrun as well as it is a source of dispute hence damaging the relationship between the project participants. The purpose of this study was to explore the causes of delay risk through a field survey study. Data were collected from construction professionals working in owner, consultant and contractor organizations. All together 208 questionnaire instruments were used and analyzed by employing statistical tools (SPSS computer program). 19 delay factors were identified by this study, out of which following factors were critical: Frequent interruptions from public (local people, pressure group etc.), changed site condition, failure to provide required construction site, unrealistic project time estimation and design errors.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.173-186
• /
• 2010

This article is about the study on construction contractors in Daegu during the Japanese Colonial Rule. The first construction contractors who involved with Kyong-bu railroad work in 1904 personally. But, after they go through the bidding method, changed by the Japanese Government General of Korea in 1922, and the second bid rigging in 1932, contractors was changed gradually the organization into unlimited partnership, limited partnership or stock corporation. The number of them was increased. Most contractors were Japanese, and organized a limited partnership which has been capitalized at 30,000 won. On the other hand, Korean contractors couldn't work at an important part, except for the personal activities of Youngsil Lee(李永實). They were usually employed as consultants or field deputies by Japanese contractors. After the Liberation, Japanese construction contractors returned to Japan, however Tatuoka-kumi(龍岡組), Yasiro-kumi(屋代組) and Sakano-kumi(坂野組) that was leading the business which were took over by Koreans. They were leading architecture field in Daegu.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.63-64
• /
• 2017

Protective coatings at nuclear power plants should be designed to withstand exposure to ambient conditions during normal operation or design-basis accidents. However, there was a change in the perception of the protective coating to the revision of the Regulatory Guidelines by the NRC in July 2000. In other words, maintenance guidelines have been strengthened in order to minimize the clogging of the cooling water system due to the substances in the containment building. Therefore, KHNP, the contractor and operator of the nuclear power plant, plans to develop the coating system for nuclear power plants in accordance with the regulation, and plans to develop its own coating expert.