• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.96-100
• /
• 1997

The shadow moire is one of the optical techniques which is able to give contour lines of an object with respect to a master grating plane. The moire patterns are issued from the superposition of a master grating and its shadow projected on the surface of an object. In case of the classical shadow moire method, the sensitivity was a few tenths millimeters. generally, it is difficult to use a phase shift method in shadow moire because it is impossible to obtain uniform phase shifts on the whole field. But in this study we use the fact that if the depth of object is much less than the distance between the observer and the master grating, and the object is displaced perpendicularly to the grating plane, phase shifts are almost uniform. Finally we obtained a better resolution by using a phase shift procedure and applied the phase shifting shadow moire to three dimensional shape measurement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.276-280
• /
• 1996

This paper presents an indirect method for on-line measuring the cutting forces in contour NC milling processes by using the current signals of the servo drive motors. A Kaluman filler is used for estimating each of the load torques to the x, y-axis servo motors of a horizontal machining center. Then, the load torque induced by the friction force in the guidewayis estimated and subtracted from the total extermal torque, thus resulting in the load torque induced by the cutting force. A series of experimental works on the circular interpolated contour milling process shows good agrement between the cutting forces measured by the dynamometer and those estimated by the method presented in the paper.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.105-113
• /
• 2006

This work is concerned with the development of digital contouring controller for multi-axial servosystems. Digital optimal contouring controller is proposed to coordinate each of the controllers of multiple feed drives and specifically improve the contouring performance. The optimal control formation includes the contour error explicitly in the performance index to be minimized. The contouring control is exercised for straight line and circular contours. Substantial improvement in contouring performance is obtained for a range of contouring conditions. Both steady state and transient error measures have been considered. The simulation study presented has established the potential of the proposed controller to improve contouring performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.1861-1873
• /
• 1996

This paper describes the content-based image retrieval system that is implemented to retrieve images using constituent rate of lines and Bezier curves. We proposed the line and Bezier curve extraction algorithm which extracts lines and curve that are fitted on the contour information of images. For this extration, it was necessary to remove internal area of the proprocessed object within images and to approximate its contour to polygon, and proposed retrevial algorithm which gets the simularity using the consitituent rate of lines and curves and perform the simularity matching.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.15 no.4
• /
• pp.20-23
• /
• 1978

This paper describes newly developed part generation program on the basis of ACUTE. New program named as ASEP(Automatic Separation Program) has function to separate a contour defined by ACUTE into several parts and store them in the part file. The separation flow is as follows, (1) Basic Contour Generation using ACUTE (2) Separation Line Definition (3) Separation into several parts (4) Storing parts in the part file with their individual name The merit of ASEP is to reduce the number of input cards and to simplify input statements.

• IE interfaces
• /
• v.8 no.3
• /
• pp.133-139
• /
• 1995

Free from curves and surfaces are frequently used in designing engineering products such as car, ship, airplane, and hosing of electronic households. In many aspect, it is very nice to use the cutter radius compensation function of CNC controller when contour machining a 2-dimensional curve. However, if the 2D curve is a parametric spline, it is not easy to apply the cutter radius compensation function of CNC controller to the NC data obtained from many commercial CAM system. This is mainly due to the error magnification effect when offsetting line segments with inevitable round-off error at their vertices. Proposed in this paper is an approach to contour machining a 2D parametric spline while using cutter radius compensation. Some implementation results are included.

• Journal of Information Processing Systems
• /
• v.19 no.4
• /
• pp.540-553
• /
• 2023

The hollow letter CAPTCHA (Completely Automated Public Turing test to tell Computers and Humans Apart) is an optimized version of solid CAPTCHA, specifically designed to weaken characteristic information and increase the difficulty of machine recognition. Although convolutional neural networks can solve CAPTCHA in a single step, a good attack result heavily relies on sufficient training data. To address this challenge, we propose a seed filling algorithm that converts hollow characters to solid ones after contour line restoration and applies three rounds of detection to remove noise background by eliminating noise blocks. Subsequently, we utilize a support vector machine to construct a feature vector for recognition. Security analysis and experiments show the effectiveness of this algorithm during the pre-processing stage, providing favorable conditions for subsequent recognition tasks and enhancing the accuracy of recognition for hollow CAPTCHA.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2E
• /
• pp.53-58
• /
• 1998

In this paper, we study the response of several anisotropic systems to buried transient line loads. The problem is mathematically formulated based on the equations of motion in the constitutive relations. The load is in form of a normal stress acting with arbitrary axis on the plane of monoclinic symmetry. Plane wave equation is coupled with vertical shear wave, longitudinal wave and horizontal shear wave. We first considered the equation of motion in reference coordinate system, where the line load is coincident with symmetry axis of the orthotrioic material. Then the equation of motion is transformed with respect to general coordiante system with azimuthal angle by using transformation tensor. The load is first described as a body force in the equations of the motion for the infinite media and then it is mathematically characterized. Subsequently the results for semi-infinite spaces is also obtained by using superposition of the infinite medium solution together with a scattered solution from the free surface. Consequently explicit solutions for the displacements are obtained by using Cargniard-DeHoop contour. Numerical results which are drawn from concrete examples of orthotropic material belonging to monoclinic symmetry are demonstrated.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1664-1665
• /
• 2011

This paper presents a derivation of the capacitance of a shielded microstrip line using the Finite Element Method (FEM). The first approach adopts a 2-D version of Gauss's theorem and an approximation of integral to finite differencing. In this case, the choice of a contour and the size of a mesh affects the validity of the capacitance. Next, the method for deriving the capacitance by using of energy relation is shown. Finally, the simulation results are compared to those of the commercial tool (COMSOL) adopted FEM.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.822-825
• /
• 1988

In this paper, we present a system which enables a real-time measurement of the number and also the body length of the fry (baby fish) using a line image sensor. Here, we consider a situation that fry are transported from a pond to another, pond through a pipe. At one position of the pipe a transparent rectanglar channel is mounted. The images of the fry, which run through this rectanglar channel, are detected by a line image sensor. The image signals are digitized to binary ones and the contour of the fry are detected. After that, a real-time image analysis is executed with a digital signal processor. Labeling program analyses the connection of every pixel. The results are transfered to a personal computer and displayed on the online monitor graphically.