• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.196-206
• /
• 1999

In this paper, we have estimated the interference effects between the NGSO/MSS system and the fixed-service M/W system for sharing the NGSO/MSS system into the frequency band operated by the existing M/W system. Between above two systems, the interference effects must be analyzed in the following three points. That is, PFD(Power Flux Density) level must be obtained in the case of the interference from NGSO satellites into M/W stations, C/I(Carrier-to-Interference Ratio) and the coordination contour in the case of the interference between NGSO/MSS feeder link and a M/W station, and the interference power level and coordination contour in the case of the interference between NGSO/MSS service link(handsets) and M/W stations. Therefore, in order to obtain above three criteria, we have developed the analytical model, introduced the related equations and estimated the system performance by means of the simulation and the theoretial analysis. It is expected that the results will be utilized in setting the criterion for sharing between the NGSO/MSS system and the M/W station.

• Journal of Periodontal and Implant Science
• /
• v.52 no.2
• /
• pp.170-180
• /
• 2022

Purpose: This study was conducted to assess the effect of hard and/or soft tissue grafting on immediate implants in a preclinical model. Methods: In 5 mongrel dogs, the distal roots of P2 and P3 were extracted from the maxilla (4 sites in each animal), and immediate implant placement was performed. Each site was randomly assigned to 1 of the following 4 groups: i) gap filling with guided bone regeneration (the GBR group), ii) subepithelial connective tissue grafting (the SCTG group), iii) GBR and SCTG (the GBR/SCTG group), and iv) no further treatment (control). Non-submerged healing was provided for 4 months. Histological and histomorphometric analyses were performed. Results: Peri-implant tissue height and thickness favored the SCTG group (height of periimplant mucosa: 1.14 mm; tissue thickness at the implant shoulder and ±1 mm from the shoulder: 1.14 mm, 0.78 mm, and 1.57 mm, respectively; median value) over the other groups. Bone grafting was not effective at the level of the implant shoulder and on the coronal level of the shoulder. In addition, simultaneous soft and hard tissue augmentation (the GBR/SCTG group) led to a less favorable tissue contour compared to GBR or SCTG alone (height of periimplant mucosa: 3.06 mm; thickness of peri-implant mucosa at the implant shoulder and ±1 mm from the shoulder: 0.72 mm, 0.3 mm, and 1.09 mm, respectively). Conclusion: SCTG tended to have positive effects on the thickness and height of the periimplant mucosa in immediate implant placement. However, simultaneous soft and hard tissue augmentation might not allow a satisfactory tissue contour in cases where the relationship between implant position and neighboring bone housing is unfavorable.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.753-768
• /
• 1995

For accurate impression taking of dental patient and esthetic denture treatment of ednetulous patient, measuring between intraoral anatomic landmarks is useful.In this study the subjects selected at a random were two-jundred forty persons with a mean age 22.5(range 21-24) and were taken impression of by irreversible hydrocolloid impression material(Alginate). On the study model made by dental stone, each individual tray was made and final impresion was taken by border moilding. On final model measurings were performed with 3-dimensional measuring device and the values were analyzed by t-test The results is following : ABOUT THE MEASURED VALUES. 1. The width between maxillary right and left canine cusp tip was average 36.44mm(s.d. 2.48), man 36.67mm, woman 35.83mm(p<0.05). 2. The width between labial height of contour of maxillary right and left canine was average 40.08mm(s.d. 2.42), man 40.29mm, woman 39.52mm(p<0.05). 3. The width between mesio-lingual cusps of maxillary first molar was average 43.14mm(s.d. 3.33), man 43.56mm, woman 42.05mm(p<0.05). 4. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary first molar was average 64.89mm(s.d. 3.88), man 65.58mm, woman 62.92mm(p<0.05). 5. The width between buccal alveolar ridge on axis of mesiolingual cusp of right and left maxillary second molar was average 68.58mm(s.d. 3.91), man 69.29mm, woman 66.30mm (p<0.05). 6. The width between right and left hamular notch was average 49.80mm(s.d. 3.96), man 50.70mm, woman 48.20mm(p<0.05). 7. The length from labial heigth of contour of maxillary central incisor to center of incisive papilla was average 9.52mm(s.d. 1.18), man 9.46mm, woman 9.63mm(p>0.05). 8. The length from labial heigth of contour of maxillary central incisor to palatine fovea was average 53.27mm(s.d. 2.93), man 53.93mm, woman 52.08mm(p<0.05). 9. The center of incisive papilla ws located posterior to intercanine line at 0.40mm(s.d. 1.16), man 0.51mm, woman 0.11mm(p<0.05). 10. The height from incisal edge of maxillary central incisor to the labial vestibule was average 21.84mm(s.d. 1.38), man 22.01mm, woman 21.00mm(p<0.05). 11. The height from mesiolingual cusp of maxillary first molar to buccalvestible was average 17.45mm(s.d. 1.42), man 17.56mm, woman 17.08mm(p>0.05). 12. The height from hamular notch to standard occlusal plane was average 6.84mm(s.d. 1.06), man 6.91mm, woman 6.70mm(p>0.05). 13. The height from the deepest point of palatal vault to standard occlsalplane was average 19.95 mm(s.d. 2.03), man 20.19mm, woman 19.12mm(p<0.05). ABOUT THE ARCH FORM 1. The arch form was able to classify into four typr by the rate of the measured values. Each arch form distribution was that the 1 group had 32.46% the 2 group 2.19%, the 3 group 52.83%, the 4 group 12.72%. The sexual composition was that in 1 group man had 73.5%, woman 26.5%, in 2 group man had 40.0%, woman 60.0%, in 3 group man had 83.3%, woman 16.7%, and in 4 group man had 55.17%, woman 44.83%. 2. When canine cusp tip was marked as point O, the intersection point between labial height of contour of maxillary central incisor and intermaxillary suture as point A, height of contour of maxillary second molar buccal alveolar ridge as B point, ${\angle}$AOB was measured $133.8^{\circ}$for the 1 group, $133.0^{\circ}$for the 2 group, $132.3^{\circ}$for the 3 group, $128.9^{\circ}$for the 4 group.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.177-183
• /
• 1996

With the increasing esthetic requirement in orthognathic surgeries, midfacial corrective surgeries were developed to improve the paranasal depression. Augmentation with autogenous bones has long been the standard in facial reconstruction, however limited graft availability, donor site morbidity, and difficulties in 3-dimensional shaping were led to limited use. Porous high density polyethylene$(Medpor{(R)})$ was introduced in the 1970s as an alloplastic implants. It can be used in various size and shapes, and shortend operation time. The purpose of this study is to determine, by means of cephalometrics, the degree of long term stability and gaining of the overlying soft tissue thickness. The results were as followings : 1. There was no evidence of foreign body reaction, infection, and tissue necrosis. 2. $(Medpor{(R)})$ implants had an advantage of clinical use ; easy to contour and adapt to obtain a precise 3-dimensional construction. 3. Cephalometric study of 16 cases of paranasal augmentation revealed an overall increase of soft tissue thickness of approximately 82.1% in 6-months following. 4. The successful results could be obtained under the aseptic handling.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.2
• /
• pp.144-152
• /
• 1991

Various muscular flaps are used in oral and maxillofacial reconstructive surgery for the defects caused by tumor resection and trauma or for the correction of head and neck deformities. The sternocleidomastoid(SCM) muscle may be widely used as a muscular or myocutaneous flap in these lesion. The authors used SCM muscular flap for the expected parotid defect following benign tumor related conservative parotidectomy in three cases. We expected that prevention of post-operative facial deformity, reduction of dead-space and protection of denuded facial nerve etc. is lead by SCM muscular flap. But the total SCM flap can lead to some complications such as "flat neck deformity", limitation of neck movement and overcontouring of parotid defect. Therefore, the authors used split pedicled SCM muscular flap and it lead good favorable results of post-operative functional and esthetic problems.

• Korean Journal of Human Ecology
• /
• v.15 no.3
• /
• pp.457-467
• /
• 2006

The following research compares two mostly-used apparel systems that are used in colleges of Korea, Gerber and PAD, by analyzing advantages and disadvantages of their Dart, Tuck and Pleats-related functions in pattern construction process. The results are the following: First, regarding transformation methods, Gerber system was able to use pivot method, while PAD system was able to use both pivot and slash method. As for movement, distribution, synthesis, folding, producing additional Dart function, the PAD system was not able to synthesize more than two Darts, and only showed differences for other functions. On the other hand, the diamond-shape Dart and diagonal Dart can be produced only in PAD system, while none of curvy shaped Dart can be produced in both systems. Second, as for pattern outer line connection capability, which is a Dart automatic transformation function, both systems showed unnatural shapes and need for correction. Third, when constructing according to the type of Tuck, we could distribute multiple Darts at a time with PAD system, while with Gerber system, distribution into multiple Darts at a time was impossible at all. Fourth, when constructing according to the contour of Pleats, Gerber system made it possible to make construction of multiple lines and box/inverted Pleats with just one order, but PAD system required repetitive tasks, which remains room for enhancement in regard to such inefficiency.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.4 no.1
• /
• pp.1-16
• /
• 2003

Objectives : The purpose of this study is researching for possibility that Moire topography be applied in group school screening for scoliosis known school health problem, and find acceptable method of early detection and early treatment for scoliosis Methods : The authors practiced Moire topography for primary & middle school 1,895 students[male 976, female 919] in Jeonju, korea in 2001. After we distinguished students who had abnormal finding in Moire topography and then re-examined spinal X-ray analysis. The data was analysed and evaluated statistically Results : According to this research, the abnormal finding in Moire topography was 53.7% (1,018 students), and students needed X-ray re-examination were 11.2% (213 students). Students diagnosed scoliosis by X-ray re-examination were 1.8%. According to statistical analysis, interval between vertical base line of pelvis and vertical base line of neck, gap between left distance and right distance to the vertical base line of pelvis and difference of contour lines have strong correlations with deformity degree of the body surface examined by Moire. Conclusions : Following this research, throughout early detection for scoliosis by Moire topography could reduce exposure from scoliosis radiographs, and could detect trunk asymmetry that couldn't be found existing X-ray examination, so it made selecting students under observation who have bad posture possible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.1
• /
• pp.255-260
• /
• 1989

Unfavorable healing of maxillary fractures may impose functional and esthetic burdens upon the trauma victim. Malunited maxillary fractures are generally a result of treatment delay, incomplete or inaccurate immobilization of the fracture fragments, or infection. Dysfunctions of mastication, distortions in speech, gross defects in facial contour, and related psychic changes are problems which may require secondary correction. When it is necessary to delay definitive treatment or when inadequate maxillary fracture reduction is recognized within the first week following injury, the maxilla can be mobilized by heavy handed dental manipulation under anesthesia or by elastic traction to an external fixation appliance attached to the maxilla by arch bars or an acrylic splint. But malunited maxillary fracture that have progressed to bony malunion require osteotomy procedure in order to establish normal anatomic relationships. This report parents two cases of malunited unilateral maxillary fracture surgically corrected by unilateral Le Fort I osteotomy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.200-207
• /
• 1996

In patients with unilateral condylar hyperplasia, increased length of the condylar neck causes deviation of the mandible to the opposite site, resulting in facial asymmetry, but the arch form and general contour of the displaced mandible is approximately symmetric. So, the unilateral condylectomy have been prefered surgical method among the surgeons. The purpose of this study is to analyze the postoperative results comparatively following two different surgical methods, condylectomy and ramus surgery, in unilateral condylar hyperplasia. Case of 6 patients with the unilateral condylar hyerplasia were analyzed in this study, 3 case of the condylectomy only, 3 cases of the ramus surgery, Clinical and radiographic evaluations were tried for comparison. In conclusion, comparative results between two groups did not show any significant difference, but we confirmed that unilateral condylectomy could be a excellent surgical methods in unilateral condylar hyperplasia thinking over the unique morphological characteristics of it.

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.13-18
• /
• 1988

Retrogradation characteristics of 1% dilute rice starch dispersion were analyzed. The retrogradation was increased with prolonged storage, however, the trend in increase was more conspicuous during the initial phase of retrogradation period. The Avrami exponent, rate constant, and time constant of 1% dilute Chuchong starch dispersion were 0.96, 0.21 $days^{-1}$, and 4.77 days, respectively As the Avrami exponent approaches unity (n=1), it is confirmed that the dilute rice starch dispersion retrogrades following the formation of a rod-like growth of crystals from instantaneous nuclei. When the retrogradation process of dilute rice starch dispersion was traced, the three-dimensional structure of crystals which had different contour from native stach was formed.