• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.1-14
• /
• 2010

Areas with negative images in cities can degrade the image of the city as a whole and slow the city's efforts to improve its image. The identification of such areas and the development of a city contour that charts the images of various areas in advance can help urban planners establish relevant strategies to ameliorate detrimental images of the city. This study intends to draw a contour of Seongnam City according to citizen's cognition levels of and preference for city area images and aim to shift the strategy of urban image planning from being results-oriented to being process-oriented. The results of this study are as follows: First, an analysis of the level of cognition of and preferences for Seongnam City's landmarks shows that the degree of cognition varies in different areas, whereas that of preferences remains similar; Second, the cognition and preference contour makes it easy to assess and diagnose city images; Third, the image management map, which merges the cognition contour with the preference contour, divides the city into four different areas. In order to manage city images, it follows that those areas with a high degree of cognition but low preference need to be classified and dealt with first. Further, this study shows that those areas with high cognition are the most populated and visited. Areas with high preference can become a strong candidate for being a landscape control point of a city, which adds to the usefulness of this study. The contour of Seongnam will contribute to networking sightseeing areas for visitors centered upon those places of high preference. It would appear that this type of networking will inspire a better image for the city.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.239-244
• /
• 1998

ESP(Electronic Speckle Pattern Interferometry) is an optical technique to measure deforamtion of engineering components and materials in industrial areas. ESPI, a non-contact and non-destructive measuring method, is capable of providing full-field results with high spatial resolution and high speed. One of important application aspects using electronic speckle pattern interferometry is to generate contours of a diffuse object in order to provide data for 3-D shape analysis and topography measurement. The electronic speckle contouring is suitable for providing measurement range from millimeters to several centimeters. In this study, we introduce the contouring method by modified dual-beam speckle pattern interferometer and a shift of the two illumination beams through optical fiber in order to obtain the contour fringe patterns. Before the experiments, we performed the geometric analysis for dual-beam-shifted ESPI contouring. And by this geometric analysis, we performed the electronic speckle contouring experiment. We used 4-frame phase shifting method with PZT for quantitative analysis of contour fringes. Finally, we showed good agreements between the geometric analysis and experimental results.

• Korean Journal of Oriental Medicine
• /
• v.16 no.1
• /
• pp.93-99
• /
• 2010

When researchers plan R&D projects, they usually use patent map or paper map for the objective decision-making, but in traditional korean medicine field, domestic patents and papers have been mainly proposed as results of many R&D projects, while most of patent or paper map tools support international patents and SCI papers, respectively. Therefore, as an alternative one KIOM constructed the project map which can provide the technology landscape for R&D project information in traditional korean medicine field. But the functions of the system is limited to the search and analysis with chart. So sophisticated analysis results are hard to get from the existing system. This research's goal is to upgrade the web based project map analysis system to provide researcher rich functionality and advanced analysis tools.

• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.1-9
• /
• 2022

A design factor analysis was conducted to reduce the thrust reduction in the off-design, due to the driving of the aerospike pintle nozzle. The close (NPR 100) as well as the open (NPR 11) stroke were fixed, as under-expansion conditions. The pintle contour, pintle head radius (R), cowl angle (θ), and cowl exit length (L) were selected as design factors. The change in thrust was analyzed, using a verified numerical analysis technique. First, the pintle head radius and the length of the cowl exit had little influence on the thrust. The cowl angle changed the mass flow rate by affecting the effective nozzle throat area, and created a reverse pressure gradient at the cowl exit. As a result of applying the dual aerospike contour, it was confirmed that the thrust in the design-off increased by approximately 1.2%, compared to the reference case and by approximately 3.4% compared to the worst case.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.8-14
• /
• 2008

Solid Rocket Motor(SRM) has advantages such as - high specific impulse, operational safety and simplicity in design and manufacturing process but thrust magnitude can't be controlled. For studying of pintle nozzle that can control the thrust magnitude of SRM, cold flow test and numerical analysis about needle type pintle shape were performed and results were presented in this paper. As the results of this study, pintle tip's shape and nozzle contour were important design parameters because thrust performance and variable thrust range of pintle nozzle depend on them. Especially, the thrust of needle typed pintle nozzle adopted in this test was predicted 13% higher than normal nozzle without pintle.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.874-877
• /
• 2012

This paper proposes the new method based on contour following method with directional angle to segment the cell into the nuclei. The object image was the Thyroid Gland cell image that was diagnosed as normal and abnormal(two types of abnormal : follicular neoplastic cell, and papillary neoplastic cell), respectively. The nuclei were successfully diagnosed as normal and abnormal. this paper, improved method of digital image analysis required in basic medical science for diagnosis of cells was proposed. The object image was the Thyroid Gland cell image with difference of chromatin patterns. To segment the cell nucleus from background, the region segmentation algorithm by edge tracing was proposed. And feature parameter was obtained from discrete Fourier transformation of image. After construct a feature sample group of each cells, experiment of discrimination was executed with any verification cells. As a result of experiment using features proposed in this paper, get a better segmentation rate(70-90%) than previously reported papers, and this method give shape to get objectivity and fixed quantity in diagnosis of cells. The methods described in this paper be used immediately for discrimination of neoplastic cells.

• Phonetics and Speech Sciences
• /
• v.7 no.2
• /
• pp.85-94
• /
• 2015

This study is to investigate the characteristic of tonal elements in word utterance of 30 pre-school children. For the analyses, 240 utterances of 4 syllable words were processed to extract acoustic values and then the data was transformed into tonal height in order to examine the contour. The results show that the mean pitch of a note is $C4{\frac{1}{2}}(271.17Hz)$ and high and low pitched notes are $C5{\frac{1}{2}}(452.57Hz)$ and $G{\sharp}3{\frac{1}{2}}(192.54Hz)$. The pitch patterns of the 4 syllables measured at the frication and aspiration portion are $E4{\frac{1}{2}}-F4-B3{\frac{1}{2}}-A3$ and F4-E4-B3-A3. The pitch patterns of consonant clusters are $B3{\frac{1}{2}}-D4-B3{\frac{1}{2}}-A3{\frac{1}{2}}$ and $A{\sharp}3{\frac{1}{2}}-C4-A3-D4{\frac{1}{2}}$. The analyses of tonal elements in this study provide evidentiary data on tonal height helpful for developing melodic contour.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.289-294
• /
• 2007

Solid Rocket Motor(SRM) has advantages such as - high specific impulse, operational safety and simplicity in design and manufacturing process, but thrust magnitude can't be controlled. For studying of pintle nozzle that can control the thrust magnitude of SRM, cold flow test and numerical analysis about needle type pintle shape were performed and results were presented in this paper. As the results of this study, pintle tip's shape and nozzle contour were important design parameters because thrust performance and variable thrust range of pintle nozzle depend on them. Especially, the thrust of needle typed pintle nozzle adopted in this test was predicted 13% higher than normal nozzle without pintle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.967-975
• /
• 2010

Image segmentation is one of the first steps leading to image analysis and interpretation, which is to distinguish objects from background. However, the active contour model can't exactly extract the desired objects because the phase only is 2. In this paper, we propose the method which can find the desired contours by composing the initial curve near the objects which have intensities of special range. The initial curve is calculated by the histogram equalization, the Gaussian equalization, and the threshold. The proposed method reduce the calculation speed and exactly detect the wanted objects because the initial curve set near by interested area. The proposed method also shows more efficient than the active contour model in the results applied the CT and MR images.