• Journal of Biomedical Engineering Research
• /
• v.24 no.4
• /
• pp.319-328
• /
• 2003

The purpose of this paper is to develop a medical laser system using the semiconductor diode laser in order to photodynamic cancel therapy as a light source. The ideal light source for photodynamic therapy would be a homogeneous nondiverging light with variable spot size and specific wavelength with stability. After due consideration in this point, in this paper, we used a diode laser resonator of 635nm wavelength. The development laser system have a statistical laser out beam with accuracy control using the constant current control of method and clinic-friendly with compact. In order to protect the diode resonator from the over-current, the rush-current and electrical fault, we specially designed. The most importance therapeutic factor are the radiation mode for cancer therapy. So we developed the radiation mode of CW(Continuous Wave), long pulse, short pulse, and burst pulse and can adjust the exposure time from several milli-second to several minute. The experimental result shows that laser beam power was increased linear from 10mW to 300mW according to the increasing input current and the increasing exposure time. The developed new compact diode laser system have a stability of output power and specific wavelength with easy control and transportable for many applications of PDT.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.516-523
• /
• 2013

In this paper, The path loss model of Air Traffic Control(ATC) telecommunication radio channel has been studied at the Incheon International Airport(IIA) with the terminal with two antlers. We measured two frequencies among VHF/UHF channel bands. The transmitting site radiated the Continuous Wave(CW). The propagation measurement was taken using the moving vehicle equipped with receiver and antenna. The transmitting power, frequency and antenna height are the same as the current operating condition. The path loss exponent and intercept parameters were extracted by the basic path loss model and hata model. The path loss exponents at passager terminal areas were 3.32 and 3.10 respectively in 128.2 MHz and 269.1 MHz. The deviation of prediction error is 9.69 and 9.65. The new path loss equation at the terminal area was also developed using the derived path loss parameters. The new path loss was compared with other models. This result will be helpful for the ATC site selection and service quality evaluation.

• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.154-158
• /
• 2019

We have used a mid-IR (mid-infrared) continuous-wave (cw) optical parametric oscillator (OPO), developed previously and described in Ref. 12, to build a performance-evaluation setup for a mid-IR spectrometer. The used CW OPO had a wavelength tuning range of $ 2.5-3.6{\mu}m$ using a pump laser with a wavelength of 1064 nm and a fan-out MgO-doped periodically poled lithium niobate (MgO:PPLN) nonlinear crystal in a concentric cavity design. The OPO was combined with a near-IR integrating sphere and a Fourier-transform IR optical spectrum analyzer to build a performance-evaluation setup for mid-IR spectrometers. We applied this performance-evaluation setup to evaluating a mid-IR spectrometer developed domestically, and demonstrated the capability of evaluating the performance, such as spectral resolution, signal-to-noise ratio, spectral stray light, and so on, based on this setup.

• 한국노년학
• /
• v.40 no.1
• /
• pp.147-161
• /
• 2020

The purpose of this research is to investigates 10-year trajectories of cognitive functions among older adults in their 70s to understand changes in cognitive functions as a continuum until very late life. This study also examines differences in trajectories of cognitive functions by gender and by changes in marital status, especially widowhood. Among participants of the Korean Longitudinal Study of Ageing(KLoSA), the sample of this study includes 800 older adults in their 70s during the first study wave (2006) and those who reported their cognitive functions for six consecutive study waves (2006, 2008, 2010, 2012, 2014, and 2016). The analyses were conducted in two steps. First, we conducted Latent Class Growth Analyses(LCGA) to investigated heterogeneous trajectories of cognitive functions in 10 years. Then, we performed multinomial logistic regression. Three heterogeneous trajectories of cognitive functions were identified. One group of 48.7% of older adults showed high cognitive function at baseline and maintained it over 10 years. Second group of 14.7% of older adults reported low cognitive function scores at baseline and showed continuous decline over time. Third group of 36.6% were showed mid-level cognitive functions and maintained their functions over time. We also found significant gender differences but not significant differences in marital status when we consider both in our model; however, the we found significant differences in changes in marital status when we did not consider gender in the model. The results suggest that the importance of considering dynamics of gender and changes in marital status to understand changes in cognitive functions in later life.

• Journal of Advanced Navigation Technology
• /
• v.26 no.4
• /
• pp.211-218
• /
• 2022

Continuous wave (CW) radar has the advantage of reliability and accuracy compared to other sensors such as camera and lidar. In addition, binarized neural network (BNN) has a characteristic that dramatically reduces memory usage and complexity compared to other deep learning networks. Therefore, this paper proposes binarized neural network based human identification and motion classification system using CW radar. After receiving a signal from CW radar, a spectrogram is generated through a short-time Fourier transform (STFT). Based on this spectrogram, we propose an algorithm that detects whether a person approaches a radar. Also, we designed an optimized BNN model that can support the accuracy of 90.0% for human identification and 98.3% for motion classification. In order to accelerate BNN operation, we designed BNN hardware accelerator on field programmable gate array (FPGA). The accelerator was implemented with 1,030 logics, 836 registers, and 334.904 Kbit block memory, and it was confirmed that the real-time operation was possible with a total calculation time of 6 ms from inference to transferring result.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.368-379
• /
• 2022

This study aims to understand the characteristics of Korean language learners and propose appropriate teaching plans for them through a focus group interview with Korean language instructors who had experience in teaching Korean at university-attached institutions in Hong Kong. For this purpose, the investigator interviewed ten instructors who taught Korean for at least five years. Korean language learners in Hong Kong who were in their twenties, but there were diverse age groups, including those in their fifties or older. Their motivations for learning Korean included the Korean Wave and the influence of support from the Continuing Education Fund by the Hong Kong government. Korean language learners in Hong Kong were characterized by active learning desire and effort, continuous learning intention, passive performance in speaking, and sensitivity to the disclosure of private information. Based on these findings, the study proposes to devise teaching and learning methods based on various age groups in a class and teaching methods for speaking that reflect the characteristics of Korean language learners in Hong Kong to teach Korean more effectively. The study is significant as a field study that examines the learning motivations, learning attitudes, and difficulties with Korean study of Korean language learners based on an unprecedented survey of the characteristics of common local Korean learners in Hong Kong.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.402-413
• /
• 2022

Objectives: In this study, the scale of exceeding the extreme heat exposure standard at the construction site was estimated using the nationally approved statistical data and wet bulb globe temperature modeling method. By comparing and analyzing the modeling results with the existing work environment monitoring results, the risk of heat exposure at outdoor construction sites was considered. Methods: Using the coordinates of second level administrative districts and meteorological observatories as the key, the automated synoptic observing system data and building permit data for 2021 were matched. The wet-bulb temperature was obtained using Stull's formula, and the globe temperature was obtained using the Tg_KMA2006 model. WBGT was calculated using these. Excess rates were obtained compared to exposure limits for heavy work-continuous work and moderate work-25% rest. It was compared with the results of the work environment monitoring in 2020. Results: As a result, 1,827,536 cases were estimated for 11,052 workplaces in one year. This is much higher than the 5,116 cases of 3818 workplaces of the existing work environment monitoring results. It is confirmed that the exposure limit was exceeded in 10.6~24.0% of the entire period and 70.2~84.1% of the peak period of the heat wave. It is very high compared to 0.9% of the existing work environment monitoring result. Conclusions: It is necessary to improve the system of monitoring and statistics related to extreme heat. Additional considerations are needed regarding WBGT estimation methods, meteorological data, and evaluation time. Various follow-up risk assessment studies for other industries and time series need to be continued.

• Korean Journal of Culture and Social Issue
• /
• v.28 no.3
• /
• pp.331-352
• /
• 2022

This study used a latent growth curve models(LGCM) to examine longitudinal changes in youth's game usage, self-control and the longitudinal mediation effect of adaptive game use in the relationship between game usage and self-control. A four-year longitudinal data of 863 adolescents from the Game User Panel Survey, provided through participation in the 2019 Game User Panel Research Conference hosted by the Korea Creative Contents Agency, was used to verify the longitudinal mediation effect of adaptive game use. SPSS 21 was used to verify the normality of variables from each wave, and to conduct correlation analysis. Mplus 6.12 was used to verify the longitudinal mediation effect. The results are as follows. First, game usage, self-control and adaptive game yielded linear temporal growth. Second, latent growth curve models showed that the direct effect of game usage on self-control was insignificant, but game usage had a significant indirect effect on self-control through adaptive game use. Continuous adaptive gaming increased self-control. Third, sobel test results showed that both the initial value and change rate of adaptive game use had a full-mediation effect, confirming the longitudinal mediation effect. This study verified the longitudinal change of self-control affected by change in game usage and adaptive game use.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.488-496
• /
• 2023

Ship and bridge structures are a type of long box-shaped structure, and resistance to vertical bending moment is a key factor in their structural design. In particular, because box girders are repeatedly exposed to irregular wave loads for a long time, the continuous collapse behavior of structural members must be accurately predicted. In this study, plastic collapse behavior, including buckling according to load changes of the box girder receiving pure bending moments, was analyzed using a numerical analysis method. The analysis targets were selected as three box girders used in the Gordo experiment. The cause of the difference was considered by comparing the results of the structural strength experiment with those of non-linear finite element analysis. This study proposed a combination of the entire and local sagging shape to reflect the effect of the initial sagging caused by welding heat that is inevitably used to manufacture carbon steel materials. The procedures reviewed in the study and the contents of the initial sagging configuration can be used as a good guide for analyzing the final strength of similar structures in the future.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.177-188
• /
• 2022

Recently, the application of distributed acoustic sensors (DAS), which can replace geophones and seismometers, has significantly increased along with interest in micro-seismic monitoring technique, which is one of the CO₂ storage monitoring techniques. A significant amount of temporally and spatially continuous data is recorded in a DAS monitoring system, thereby necessitating fast and accurate data processing techniques. Because event detection and seismic phase picking are the most basic data processing techniques, they should be performed on all data. In this study, a machine learning-based P, S wave phase picking algorithm was developed to compensate for the limitations of conventional phase picking algorithms, and it was modified using a transfer learning technique for the application of DAS data consisting of a single component with a low signal-to-noise ratio. Our model was constructed by modifying the convolution-based EQTransformer, which performs well in phase picking, to the ResUNet structure. Not only the global earthquake dataset, STEAD but also the augmented dataset was used as training datasets to enhance the prediction performance on the unseen characteristics of the target dataset. The performance of the developed algorithm was verified using K-net and KiK-net data with characteristics different from the training data. Additionally, after modifying the trained model to suit DAS data using the transfer learning technique, the performance was verified by applying it to the DAS field data measured in the Pohang Janggi basin.