• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.487-494
• /
• 2013

In this study, solutions for a liquid pool spreading model with continuous and instantaneous release are discussed based on the model used in the FERC's report. The effects of the release time on the liquid pool volume and radius are investigated for the continuous release. For the continuous release with the frictional resistance force in the liquid pool spreading model, the vaporization time decreases as the release time increases. On the other hand, for the continuous release without the frictional resistance force in the liquid pool spreading model, the vaporization time increases as the release time increases. These phenomena are deeply related to the pool radius. In addition, the effects of the initial pool radius for the instantaneous release in the liquid pool spreading model are discussed. For the case with the frictional resistance force in the liquid pool spreading model, as reducing release time in the model with the frictional resistance force for the continuous release, the solution for a continuous release approaches to that for an instantaneous release. On the contrary to this, the pool volume and radius for the instantaneous release without the frictional resistance force are totally different from those for the continuous release without the frictional resistance force.

• 한국동물학회지
• /
• 제32권4호
• /
• pp.329-338
• /
• 1989

Present study examined the effect of intermittent versus continuous infusion of progesterone(P) on LHRH release in uiuo from the mediobasal hvpothalamus of ovariectomiEed, estradiol-primed adult rats bearing push-pull cannulae. Three experimental groups were studied: 1) control (perfusion medium only),2) intermittent perfusion of P (10-min on,20-min off, and 3) continuous perfusion of p. p (10 ng/mll was directly infused into the MBH following a 3 hr basal collection. Perfusates were collected at 10 min intents린s on ice and LHRH release was measured by LHRH radioimmunoassav. Cycle detector analysis revealed that the spontaneous HRH output in the control group was pulsatile over a 7 hr push-pull perfusion period. The mean basal LHRH release, pulse amplitude and pl서se period were 0.68 $\pm$ 0.03 ps110 min, 1.15 $\pm$0.08 pg and 60 $\pm$ 9 min, respectivelv. Intermi구eat perfusion of P clearly stimulated the mean LHRH release (pre-P vs post-P: 1.14 $\pm$ 0.18 vs 1.99 $\pm$ 0.53 pg) without changes in LHRH pulse frequency. In contrast to intermittent infusion of p, continuous administration of P faithed to modify LHRH release, since the mean LHRH release and pulse amplitude between pre-P and post-P perfusion urere similar. The in vitro study clearly showed that intermittent, but not continuous administration of P is effective in stimulating LHRH release. Therefore, it appears that rhythmic secretion of P mal be the erective signal for activating the neural LHRH apparatus.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.177-186
• /
• 2021

Radioactive materials from nuclear power facilities can be released into the atmosphere through various channels. Recently, the dispersion of radioactive materials has become critical issue in Korea after Kori Unit 1 and Wolsong Unit 1 were permanently shut down. In this study, annual atmospheric dispersion factors were compared based on the continuous release and purge release using the XOQDOQ computer program, a method for calculating atmospheric dispersion factors at commercial nuclear power stations. The meteorological data analyzed in this study was based on the Shin Kori nuclear power meteorological tower which has the largest operating nuclear power plants in Korea, for three years (from 2008 to 2010). The analysis results of the dispersion factor of the radioactive material release obtained using the XOQDOQ program showed that the difference between the continuous release and purge release was within two times. This study will be valuable helpful for revealing the uncertainty of the predictive atmospheric dispersion factor to achieve regulation.

• 에너지공학
• /
• 제23권4호
• /
• pp.41-48
• /
• 2014

지금까지 관행적으로 액체의 누출은 순간누출과 연속누출로 분류 되어 왔다. 본 논문에서는 이러한 분류의 문제점을 인식하고 새로운 분류 방법을 찾기 위하여 제한된 시간 동안 누출되는 극저온 액체의 확산에 관한 연구를 수행하였다. 이러한 물리적 현상은 누출된 액체풀의 부피, 반경, 높이에 관한 연립방정식에 의해 지배되며, 주요 변수는 단위면적당 증발률, 누출시간, 누출량의 3 개 이다. 섭동법에 의한 해를 효율적으로 구하기 위하여 독립된 형태의 부피에 관한 2차 미분방정식을 얻었다. 이 새로운 지배 방정식은 기존의 방법에 비하여 매우 간단하게 해를 얻을 수 있게 한다. 섭동해의 결과, 동일한 누출량인 경우에 누출시간이 작으면 연속누출이 순간누출로 이어지는 혼합 형태의 누출이 되나, 누출시간이 크게 되면 연속누출 형태로만 존재하게 된다. 동일한 누출시간의 경우에는 누출량이 작으면 연속누출 형태로만 존재하지만, 누출량이 증가할수록 혼합형태의 누출로 된다. 이러한 2개의 영역을 분할하는 경계를 섭동해를 이용하여 해석적으로 제시함으로서 누출의 새로운 분류에 대한 명확한 근거를 제시 하였다.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.35-43
• /
• 2002

For the unconfined vapor cloud explosion accident by the continuous release of gas-liquid flow of various saturated liquids in a vessel at ground level, overpressures were estimated and analyzed with various release conditions and materials by TNT equivalency model with vapor dispersion. We found that at same release conditions, overpressure showed n-heptane > xylene > n-hexane > toluene > n-heptane > benzene, respectively and that overpressure was increased with increasing the hole diameter and the storage pressure, but it was increased with decreasing the wind speed, the interested distance, and the vessel thickness.

• 대한안전경영과학회지
• /
• 제2권4호
• /
• pp.33-43
• /
• 2000

The consequence analysis for the unconfined vapor cloud explosion(UVCE) accident by the continuous release of butane vapor was performed and effects of process parameters on consequences were analyzed in standard conditions. For the case of continuous release(87.8 kg/s) of butane vapor at 8 m elevated height in the debutanizing process of tile naphtha cracking plant operating at 877 kPa ＆ 346.75 K, we found that combustion ranges of dispersed vapor estimated by HMP model were 11.2~120.2 m and overpressures estimated by TNT equivalency model at 200 m were about 37.35~55.1 kPa. Also, overpressures estimated by Model UVCE I based on advective travel time to $X_{LFL}$ were smaller than those estimated by Model UVCE IIbased on real travel time between $X_{UFL}$ and $X_{LFL}$. At the same time, damage intensities at 200 m and effect ranges by overpressure could be predicted. Furthermore, simulation results showed that effects of operating pressures on consequences were larger than those of operating temperatures and results of accidents were increased with increasing operating pressures. At this time, sensitivities of overpressures for UVCE accident by the continuous release were about 5 kPa/atm.

• 한국토양비료학회지
• /
• 제44권4호
• /
• pp.545-550
• /
• 2011

Urea intercalated into montmorillonite (MT) exhibits remarkably enhanced N use efficiency, maintaining its fast effectiveness. This study dealt with the release property of urea from metal-urea-clay hybrid with MT (MUCH) under continuous-flow conditions and the cumulative impacts of its successive application on physicochemical properties of soils. Releases of urea were completed within 4 hrs under continuous-flow condition regardless of the types and the leaching solutions. However, urea release property was significantly affected by both the form of fertilizer and the presence of electrolytes in solution. The fast release property of urea from MUCH in continuous-flow condition was not significantly affected by soil properties such as soil pH and soil texture. In addition, its successive application did not lead to any noticeable change in soil physicochemical properties, water stable aggregate rate, water holding capacity and cation exchange capacity in both sandy loam and clay loam soils. Therefore, this study strongly supported that urea intercalated into MT could be applied as fast-effective N fertilizer, in particular for additional N supply.

• Environmental Engineering Research
• /
• 제10권5호
• /
• pp.257-263
• /
• 2005

A batch and a continuous type experiments were conducted to test the conditions for simultaneous phosphorus release and uptake, and denitrification, taking place in one process. The bacteria able to denitrify as well as to remove phosphorus were evaluated for the application to biological nutrient removal(BNR) process. In the batch-type experiment, simultaneous reactions of phosphorus release and uptake, and also denitrification were observed under anoxic condition with high organic and nitrate loading. However the rate and the degree of P release were lower than that occurred under anaerobic condition. BNR processes composed of anaerobic-anoxic-oxic(AXO), anoxic-anaerobic-oxic(XAO) and anoxic-oxic(XO) were operated in continuous condition. The anoxic reactors in each process received nitrate loading. In the AXO process, P release in anaerobic reactor and the luxury uptake in oxic reactor proceeded actively regardless to nitrate loading. However in XAO and XO processes, P release and luxury uptake occurred only with the nitrate loading less than $0.07\;kg{NO_3}^--N$/kgMLSS-d. With higher nitrate load, P release increased and the luxury uptake decreased. Therefore, it appeared that the application of denitrifying phosphorus-removing bacteria (DPB) to BNR process must first resolve the problem with decrease of luxury uptake of phosphorus in oxic reactor.

• 한국화재소방학회논문지
• /
• 제12권2호
• /
• pp.3-15
• /
• 1998

나프타분해플랜트의 부탄추출공정에서 부탄중기의 연속누출에 의한 제트화재와 플래쉬화재의 사고 결과에 대환 영향을 평가하고 사고결과에 미치는 공정변수들의 영향을 해석하였다. 877 kPa과 346.75 K의 공정조건에서 부탄중기가 87.8 kg/s의 속도로 8m의 높이에서 연속누출되 는 경우에 표준조건으로 껄정한 대기 및 환경조건에서 사고결과를 해석한 결과, 제트화재에서는 화염 의 형태와 크기를 예측할 수 있었으며 누출지점으로부터 200m에서 API모델로 산출한 복사열은 약 5 kW /m2이었고 플래쉬화재가 일어날 수 있는 연소범위는 11.2-120.2 m이었다. 그리고사고결과에 미치는조업합력의 영향은조업은도보다크며 압력이 증가할수록사고결과값이 중가하였다. 이때 플래쉬화재에서 XUFL에 미치는 공정압력의 영향은 Xr.FL에서보다 약 1/10이하를 나 타내었다.

• 한국안전학회지
• /
• 제18권1호
• /
• pp.64-70
• /
• 2003

For the unconfined vapor cloud explosion(UVCE) accident by the continuous release of gas-liquid flow of various saturated liquids in a vessel at ground level, overpressures were estimated by TNT equivalency model with two estimation methods, such as UVCE I model based on a constant release time and UVCEII model based on a real travel time of vapor by dispersion and analyzed with various release conditions. As a simulation result the simple, easy, and correct method of evaluation of consequences of the UVCE accident was proposed by using consequences of UVCE I model and correlation equations for differences of overpressures between UVCE models, so that this evaluation method could be used easily in the small and medium size enterprises without using the dispersion model.