• 한국환경보건학회지
• /
• 제30권3호
• /
• pp.214-220
• /
• 2004

The microcosm type wetland systems were constructed in order to treat wastewater contaminated with parathion. The microcosm reactor consisted of marsh and pond type. The experiment was carried out using batch (marsh or pond) and continuous (marsh-pond and pond-marsh type) systems. In the batch reactor, marsh-type wetland completely removed parathion in water within 8 days, while pond reactor removed 97% of parathion during the same period. During parathion degradation, the amount of 4-nitrophenol production, one of the metabolites from parathion degradation, was higher in marsh-type batch reactor. In the continuous systems, both marsh-pond and pond-marsh combination systems effectively removed parathion from water, and the production of 4-nitrophenol was also minimal. In the extraction experiment, the parathion and its metabolite were not found in the wetland soil and the plant. In order to achieve both aerobic and anaerobic conditions, the continuous wetland system combining marsh and pond type can be the alternative for the non-point source pollutants such as parathion pesticide.

• 환경위생공학
• /
• 제14권3호
• /
• pp.130-138
• /
• 1999

The feasibility of municipal sewage sludge digestion was investigated by using thermophilic anaerobic sequencing batch reactor(ASBR). One-day settle time was enough for the high performance of solid-liquid separation. The conversion of semi-continuous mode to sequencing batch mode is easily achieved without any adverse effects, although the large amount of sludge equal to the volume ratio of 0.3~06 to reactor volume was added in the feed step of the start-up. The ASBRs had higher conversion capability of organics to biogas than the control reactor. Gas yields of the ASBRs were increased by the average of 50% over the control reactor across a range of hydraulic retention time(HRT)s from 10days to 5days. The thermophilic reactors showed higher gas production than mesophilic reactor. Removal efficiencies of organic matter exceeded 80% on the basis of supernatants, except that at the reactor. Solid-liquid separation was essential in the performance of the ASBR, especially, at the lower HFT. The ASBRs were highly efficient in the retention of activated biomass within the reactor. thus compensating for increased equivalent organic loading rate through increased solids retention times followed by the increased solids, while maintaining shorter HRTs.

• 한국물환경학회지
• /
• 제23권3호
• /
• pp.397-402
• /
• 2007

Anammox reactor seeded with sewage sludge from RBC reactor and anaerobic granule from full-scale UASB reactor treating distillery wastewater was operated. Mixed granule and suspended sludge in the ammonium oxidizing process were taken and analyzed to investigate microbial community structure by molecular methods such as gene cloning and phylogenetic tree analysis after 250 days of continuous cultivation. The average nitrogen removal rate showed $0.9kg\;N/m^3-day$ after 250 days of continuous operation, then the maximum nitrogen removal rate showd $1.9kg\;N/m^3-day$ when $2.1kg\;N/m^3-day$ of nitrogen loading rate was applied. As results of gene cloning and phylogenetic tree analysis, Three kinds of phylum were found to be Proteobacteria, Acidobacteria and Planctomycetes (anammox bacteria) in mixed granule. Five kinds of phylum were found to be Proteobacteria, Chlorobi, Planctomycetes, Nitrospirae and Verrucomicrobia in suspended sludge. We found planctomycete KSU-1 and putative new anammox bacteria in the reactor. Microbial structure represented different consortia depending on the types of sludge in the anammox reactor.

• 유기물자원화
• /
• 제13권4호
• /
• pp.128-135
• /
• 2005

본 연구에서는 CFSTR(Continuous-flow Stirred-Tank Reactor) 형식의 반응조에 담체가 채워진 호기-혐기조합 공법에 따른 질산화 및 탈질화에 관한 효율의 증대와 유입수 및 침전조 상등액의 유량대비를 조절 하므로써 질소제거의 효율 증대에 관한 방법을 모색하고자 하였다. 탈질조 내의 탈질효율에 비례하여 포기 반응조 내의 질산성 질소 농도를 산출하고자 유입수와 침전조 내에서의 상등액을 탈질조로 반송하여 유입하고 유입수와 반송되는 침전조 상등액 유입의 유량대비를 통하여 최종적으로 반응조에 대한 질소제거의 효율을 파악하고자 하였다. 적절한 유량대비를 이용하였을 때 탈질조 내의 필요한 탄소원의 공급이 유입수로 통해 이루어지는 것으로 판단되어지며, 외부탄소원의 주입 없이 유입수 만으로도 완벽하게 탈질이 이루어지는 것을 확인 할 수 있었다. 하지만 유입수와 침전조 상등액의 유량대비에서 침전조 상등액의 유량비가 커지면 커질수록 유입수내의 탄소원의 유입이 줄어들기 때문에 이에 대한 탄소원의 농도에 대한 산정이 중요하다고 생각된다.

• 대한화학회지
• /
• 제36권3호
• /
• pp.393-404
• /
• 1992

새로운 효소반응기를 쓰는 요소 정량용 연속${\cdot}$자동화 장치의 감응성질을 조사하였다. 효소반응기는 지지체인 nylon-6입자(42∼48 mesh)를 teflon관(안지름 2mm, 길이 20cm)에 충전시키고, 이 지지체의 표면에 공유결합제인 glutaraldehyde로 urease를 고정화시켜서 제작하였다. 연속${\cdot}$자동화장치는 효소반응기, 기체투석기 및 지시전극인 관형 PVC-nonactin막 암모늄 이온 선택성 전극을 차례로 연결하여 만들었다. 이 장치를 써서 요소를 정량할 때 감응특성은 다음과 같다. 곧 직선감응 농도범위는 $5.5{\times}10^{-6}$~$2.4{\times}10^{-3}M$, 감응기울기는 57.8 mV/decade, 검출한계는 $1.5{\times}10^{-6}M$, 효소반응기의 전환백분율은 80.8%이었다. 효소반응기의 최적 완충용액은 0.01M Tris-HCl 완충용액(pH 7.0∼7.8)과 0.01M 인산염 완충용액(pH 6.9∼7.5)이었고, 수명은 150일 정도였다. 또한 다른 생리활성물질의 방해는 없었다.

• Journal of Microbiology and Biotechnology
• /
• 제9권4호
• /
• pp.482-487
• /
• 1999

The Pseudomonas sp. strain NGK1 (NCIM 5120) was immobilized in calcium alginate, agar, and polyacrylamide gel matrices. The salicylic acid-producing capacity of freely suspended cells was compared with immobilized cells in batches with a shake culture and continuous culture system in a packed bed reactor. Freely suspended cells ($4\times10^{10}cfu/ml$) produced 12 mM of salicylic acid, whereas cells immobilized in calcium alginate ($1.8\times10^{11}$cfu/g beads), agar ($1.8\times10^{11}$cfu/g beads), and polyacrylamide ($1.6\times10^{11}$cfu/g beads) produced 15, 11, and 16mM of salicylic acid, respectively, from naphthalene at an initial concentration of 25 mM. The continuous production of salicylic acid from naphthalene was investigated in a continuous packed bed reactor with two different cell populations. The longevity of the salicylic acid-producing activity of the immobilized cells from naphthalene was also studied in semi continuous fermentations. The immobilized cells could be reused 18, 13, and more than 20 times without losing salicylic acid-producing activity in calcium alginate-,agar-, and polyacrylamide-entrapped cells, respectively. The study reveals a more efficient utilization of naphthalene and salicylic acid production by the immobilized Pseudomonas sp. strain NGK1 as compared to the free cells.

• 한국축산시설환경학회지
• /
• 제4권2호
• /
• pp.149-160
• /
• 1998

Hog manure slurry amended with sawdust was composted in pilot-scale reactor vessels using continuous aeration nuder different C/N ratios and pH conditions during composting high rate (decomposition) process. For each material two replicated piles were built and monitored over a period of three weeks. The compost piles had an initial volume of 0.18 ㎥. In this study we evaluated the temperature in compost O2 and CO2 evolution, aeration rate, NH3 concentration etc. and investigated the stability of compost during composting high rate process. According to measured results, while the maximum NH3 concentration during composting high rate process. According to measured results, while the maximum NH3 concentration during composting high rate was in the range of 213 to 412 ppm on 5th day which was near the optimum C/N(22∼24) and pH(7.5∼7.9). And then, the NH3 concentration reduced to between 22∼26 ppm by 13th day. The maximum NH3 concentration for the lower C/N(18∼19) and pH value of 6 reached 574∼1,063 ppm by the 16th through 11th days and the NH3 concentration during continuous aerated composting high rate process, it was more important to manage NH3 gas so that compost odor is reduced.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.107-116
• /
• 2019

Nitrogen removal, nitrous oxide ($N_2O$) emission and microbial community in sequencing batch and continuous-flow intermittent aeration processes were investigated. Two sequencing batch reactors (SBRs) and two continuous-flow multiple anoxic and aerobic reactors (CMRs) were operated under high dissolved oxygen (DO) (SBR-H and CMR-H) and low DO (SBR-L and CMR-L) concentrations, respectively. Nitrogen removal was enhanced under CMR and low DO conditions (CMR-L). The highest total inorganic nitrogen removal efficiency of 91.5% was achieved. Higher nitrifying and denitrifying activities in SBRs were observed. CMRs possessed higher $N_2O$ emission factors during nitrification in the presence of organics, with the highest $N_2O$ emission factor of 60.7% in CMR-L. SBR and low DO conditions promoted $N_2O$ emission during denitrification. CMR systems had higher microbial diversity. Candidatus Accumulibacter, Nitrosomonadaceae and putative denitrifiers ($N_2O$ reducers and producers) were responsible for $N_2O$ emission.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.319-325
• /
• 2004

An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of $CO_2$ for 15 min, the reactor was pressurized with liquid $CO_2$ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and $CO_2$ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.81-88
• /
• 2013

Neutron spectrum analyses of spallation neutrons are conducted in the accelerator-driven system (ADS) facility at the Kyoto University Critical Assembly (KUCA). High-energy protons (100 MeV) obtained from the fixed field alternating gradient accelerator are injected onto a tungsten target, whereby the spallation neutrons are generated. For neutronic characteristics of spallation neutrons, the reaction rates and the continuous energy distribution of spallation neutrons are measured by the foil activation method and by an organic liquid scintillator, respectively. Numerical calculations are executed by MCNPX with JENDL/HE-2007 and ENDF/B-VI libraries to evaluate the reaction rates of activation foils (bismuth and indium) set at the target and the continuous energy distribution of spallation neutrons set in front of the target. For the reaction rates by the foil activation method, the C/E values between the experiments and the calculations are found around a relative difference of 10%, except for some reactions. For continuous energy distribution by the organic liquid scintillator, the spallation neutrons are observed up to 45 MeV. From these results, the neutron spectrum information on the spallation neutrons generated at the target are attained successfully in injecting 100 MeV protons onto the tungsten target.