• Microbiology and Biotechnology Letters
• /
• v.22 no.6
• /
• pp.565-570
• /
• 1994

The pullulan production and morphological change of Aureobasidium pullulans ATCC 9348 were investigated both in batch fermentation and in continuous fermentation. The best carbon source for pullulan production was sucrose among seven different carbon sources. The pullulan production of A. pullulans was increased with increasing the carbon to nitrogen ratio of the medium using sucrose as a carbon source. In batch fermentation, production of pullullan occurred following exhaustion of the nitrogen source from the medium. The continuous fermentation showed that the pullulan production was closely parallelled with cell growth and was most effective at a dilution rate of 0.06~0.07 hr$^{-1}$-. The ratio of yeast-like cells(blastospores) of A. pullulans increased with the increase of growth rate, and reached 100% over the growth rate of 0.07 hr$^{-1}$. The growth rate, within a certain range, affected not only on the cell morphology, but on the specific pullulan productivity of A. pullulans.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.6
• /
• pp.41-48
• /
• 2014

In this study, the behavior of fill dam with continuous water level change considering velocity changes via centrifugal model test was investigated. In addition, the collapse of fill dam due to the overflow was also experimentally simulated. The experimental results demonstrate that the pore water pressures and displacements vary in proportion to the water-level-change velocity, and the displacement increment is independent to the water-level-change velocity. Also, it is confirmed that the continuous water level change induces to the progress of fill-dam deformation due to displacement accumulation and the fill-dam stability dramatically degrades owing to the overflow. Hence, the real-time monitoring of pore water pressures and displacements of fill dam, and the control of water level in heavy rain through the countermeasure such as opening sluice gates are needed to ensure the stability of fill dam.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.192-200
• /
• 2002

Semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspensions for passenger cars. In this study, a continuous variable damper for a passenger car suspension is developed, which is controlled actively and exhibits high performance with light weight, low cost, and low energy consumption. To get fast response of the damper, reverse damping mechanism is adapted, and to get small pressure change rate after blow-off, a pilot controlled proportional valve is designed and analyzed. The reverse continuous variable damper is designed as a HS-SH damper that offers good body control with reduced transferred input force from tire, compared with any other type of suspension system. The damper structure is designed, so that rebound and compression damping force can be tuned independently, of which variable valve is placed externally. The rate of pressure change with respect to the flow rate after blow-off becomes smooth when the fixed orifice size increases, which means that the blow-off slope is controllable using the fixed orifice size. The damping force variance is wide and continuous, and is controlled by the spool opening, of which scheme is usually adapted in proportional valves. The reverse continuous variable damper developed in this study is expected to be utilized in the semi-active suspension systems in passenger cars after its performance and simplicity of the design is confirmed through real car test.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.627-631
• /
• 2019

Recently, researchers in Korea and abroad actively have conducted research activities using the ARAON, a Korean icebreaking research vessel. The ARAON regularly conduct research activities in the Arctic and Antarctic waters every year. The icebreaking mode, which can be either continuous breaking or ramming, is determined by the conditions of the ice and the ice-covered waters. When the icebreaker encounters thick sea ice or an ice ridge, ramming is used. At that time, the speed of the ship generally is slower than that of continuous icebreaking. In this study, the ice load signal at the time of repetitive ramming during ARAON's 2012 Antarctic research voyage was analyzed. The time history of the ice load signal and the change in the speed of the ship used in ramming were compared with these values during continuous icebreaking.

• The Journal of the Korean dental association
• /
• v.51 no.6
• /
• pp.330-336
• /
• 2013

Considering the high prevalence, transverse control in adult patients presenting relatively narrow maxillary width is a challenging issue. This study compared the pattern of arch expansion induced by either miniscrew-assisted rapid palatal expander (MARPE) or continuous archwire engaged on self-ligating brackets. Age-matched adults groups(N=15 each) were treated with respective appliance. In both groups, all intercanine, interpremolar, and intermolar widths increased, and significantly greater change was noted in the intermolar region. Buccal tipping was minimal in both groups. Subsequent arch length increase, lingual tipping of incisors and distal tipping of molars were also found in both groups. According to the results, it can be concluded that the MARPE induced generally more arch expansion, particularly in the intermolar width, indicating that the adults showing buccal crossbite of the molars may have to undergo expansion via MARPE prior to arch alignment using continuous archwire.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.35-40
• /
• 2000

The influence of cyclic loading history on the creep behavior of the 30 vol% hot-pressed $SiC_f/Si_3N_4copmposite was experimentally investigated at $1200^{\circ}C$. The duration of loading/unloading had great effects on the creep behaviors. The short term duration cyclic loading history test results showed significant reduction in the primary and steady-state creep rates. For example, 300sec loading/300sec unloading history resulted in 70% lower steady-state creep rate than that of the continuous loading. However the long term duration cyclic loading history test results showed little change in creep rates compared to those of the continuous one. The reason for the significant change in the short term duration cycles was estimated due to the change in the stress redistribution between the fiber and matrix during the creep recovery in the primary stage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.267-267
• /
• 2010

The continuous change in the electronic band structure of metal-adsorbed bilayer graphene was calculated as a function of metal coverage using first-principles calculations. Instead of modifying the unit cell size as a function of metal coverage, the distance between the metal atoms and bilayer graphene in the same $2{\times}2$ unit unit cell was controlled to change the total charges transferred from the metal atoms to bilayer graphene. The validity of the theoretical method was confirmed by reproducing the continuous change in the electronic band structure of K-adsorbed epitaxial bilayer graphene, as shown by Ohta et al. [Science 313, 951 (2006)]. In addition, the changes in the electronic band structures of undoped, n-type, and p-type bilayer graphene were studied schematically as a function of metal coverage using the theoretical method.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.415-420
• /
• 1999

Objectives: We investigated the effects of changes in obesity and life style factors, such as cigarette smoking, alcohol drinking, and exercise, on the changes in blood pressure and serum cholesterol among Korean men. Methods: This study included 7,205 healthy male employees in the steel manufacturing industry. Each subject underwent health examination in 1994 and was re-examined in 1997. The study subjects were classified into four categories, according to changes in body mass index (BMI) (loss; stable; mild gain: severe gain), cigarette smoking (quitter; nor-smoker; smoker continued; smoker started), alcohol drinking (quitter; non-drinker; drinker continued; drinker started) and exercise (more exercise; continuous regular exercise; continuous irregular or no exercise; less exercise), respectively. We evaluated the relationship between the categories of change in those independent variables and the changes in blood pressure and serum cholesterol, adjusted for BMI in 1994 and age by analysis of variance. Results: The change in systolic blood pressure was positively associated with the changes in BMI (p<0.001) and drinking (p=0,001), but negatively with smoking (p=0,004), compared to the first category of each independent variables. The systolic blood pressure was significantly less increased in the continuous smoking group than quitter or hon-smoker. The changes in diastolic blood pressure and serum cholesterol appeared to have statistically significant linear relationships only with the change in BMI. The change in exercise showed a marginal significance with diastolic blood pressure (p=0.088). Conclusions: These prospective data emphasize the importance of obesity as a determinant of the changes in blood pressure and serum cholesterol. In addition, the changes in smoking and drinking habits can affect systolic blood pressure.

• Information Systems Review
• /
• v.8 no.2
• /
• pp.119-138
• /
• 2006

Association Rule Mining has been successfully used for mining knowledge in static environment but it provides limited features to discovery time-dependent knowledge from multi-point data set. The aim of this paper is to develop a methodology which detects changes of customer behavior automatically from customer profiles and sales data at different multi-point snapshots. This paper proposes a procedure named 'Recursive Change Mining' for detecting continuous change of customer purchase behavior. The Recursive Change Mining Procedure is basically extended association rule mining and it assures to discover continuous and repetitive changes from data sets which collected at multi-periods. A case study on L department store is also provided.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.382-385
• /
• 2008

MODIS images have a great advantage of high temporal resolution to monitor land cover changes in a large area. The moderate and low spatial resolution satellite images are incomparably economic than high resolution satellite images. As diverse satellite images are provided recently, strategies using satellite images are necessary for continuous, effective and long-term land monitoring. This research purposed to use MODIS images to monitor land cover in Korean peninsula for long-term and continuous change detection. To maximize the advantages of high temporal resolution, the change detection was based on the MODIS temporal profiles of the surface reflectance for one year. In this study as the reflectance patterns of year 2005 were compared with the reflectance patterns of year 2007, the changed pixels could be detected during two years. To set up the threshold value for the decision of change, ASTER images with the higher spatial resolution, 15m, were used for this study. The test area covered the suburban area of metropolitan city, Seoul, where the landcover changes have been frequently happened.