• Journal of Life Science
• /
• v.8 no.4
• /
• pp.336-372
• /
• 1998

To investigate the effect of Ssanghwatang and Ssanghwatang-mixed-Paedoksan on the recovery of exercise induced fatigue, we observed content changes of lactate, LDH, glucose, FFA as metabolic substance in the serum of rats administered these drugs just after adn 120 minutes after maximum swimming,. The results were obtained as follows: 1. Lactate was found to be decreased in the rats with administration of Ssanghwatang and Ssanghwatang-Mixed-Paedoksan, 2. serum LDH activity was found to be decreased in the rats with administration of Ssanghwatang-Mixed-Paedoksan, 3. glucose was found to be increased in the rats with adiministation of Ssanghwatang-Mixed-Paedoksan, 4. FFA was found to be decreased in the rats with administation of Ssanghwatang and Ssanghwatang-Mixed-Paedoksan,.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.617-622
• /
• 2011

The effect of oxygen on the shape memory characteristics in Ti-18Nb-6Zr-XO (X = 0-1.5 at%) biomedical alloys was investigated by tensile tests. The alloys were fabricated by an arc melting method at Ar atmosphere. The ingots were cold-rolled to 0.45 mm with a reduction up to 95% in thickness. After severe cold-rolling, the plate was solution-treated at 1173 K for 1.8 ks. The fracture stress of the solution-treated specimens increased from 450 Mpa to 880 MPa with an increasing oxygen content up to 1.5%. The fracture stress increased by 287MPa with 1 at% increase of oxygen content. The critical stress for slip increased from 430 MPa to 695 MPa with an increasing oxygen content up to 1.5 at%. The maximum recovery strain of 4.1% was obtained in the Ti-18Nb-6Zr-0.5O (at%) alloy. The martensitic transformation temperature decreased by 140 K with a 1.0 at% increase in O content, which is lower than that of Ti-22Nb-(0-2.0)O (at%) by 20 K. This may have been caused by the effect of the addition of Zr. This study confirmed that addition of oxygen to the Ti-Nb-Zr alloy increases the critical stress for slip due to solid solution hardening without being detrimental to the maximum recovery strain.

• Journal of Industrial Convergence
• /
• v.21 no.3
• /
• pp.83-97
• /
• 2023

The purpose of this study was to identify perception of mental health recovery of mentally disordered offenders hospitalized at the national forensic psychiatric hospital. The participants were 91 mentally disordered offenders hospitalized at the national forensic psychiatric hospital in C province. The participants were provided with a written questionnaire about mental health recovery so that they could freely describe it, and collected data were analyzed by two researchers according to Krippendorff's content analysis method. As a result, meaning of mental health recovery were derived from 4 categories and 17 themes, and four categories were 'liberate from psychiatric symptoms', 'stable daily and social life is possible', 'living a hopeful and meaningful life' and 'life without crime after discharge'. mental health recovery facilitators and barriers were derived from 4 categories and 14 themes, 'treatment factors', 'personal factors', 'interpersonal factors' and 'environmental factors'. The results of this study can be used as basic data for education and intervention development for mental health recovery of mentally disordered offenders at the national forensic psychiatric hospital.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.21 no.1
• /
• pp.71-80
• /
• 2003

Printing inks are mainly composed of pigment and vehicles. Among these components, the Vehicle affect the rheologic property of the ink the most but pigment content or characteristic also affect to the fluidity property not less than the vehicle. In the study, with the same vehicle on each sample, by making the sample to increase pigment content gradually. It can be examined the influence of the pigment to the fluidity of ink. In result we found that the viscosity value of the low shear rate rang has relatively higher value with increasing the pigment content in the ink. According to higher pigment content, yield stress and thixotropy index increases gradually. Structure recovery of the ink is that, the higher pigment content's ink, the less changing shear rate, and it takes less time to recover.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.spc8
• /
• pp.2988-2996
• /
• 2011

Shape memory polyurethane (SMPU), grafted with a fluorescent dye (Rhodamine, Mehylene violet, or Fluorescein) through an allophanate linking, was tested for the fluorescence and the shape recovery effect. The main chain of SMPU was composed of 4,4'-methylenebis(phenylisocyanate) (MDI), poly(tetramethyleneglycol) (PTMG), and 1,4-butanediol (BD), and a fluorescent dye was connected through a second MDI linked to the carbamate moiety of the main chain. Three series of SMPU, differing according to their dye content, were prepared to compare their shape recovery and fluorescence properties. In tensile mechanical property, maximum stress increased up to 350% compared to the linear SMPU, and strain remained above 2000%. Shape recovery went to as high as 97%, and remained almost same after repetitive shape recovery test cycles. Finally, the fluorescence emission of SMPU was demonstrated in the luminescence spectrum and fluorescent light emission pictures. In addition, the response of SMPU to external stimuli such as metal ions was investigated.

• Environmental Engineering Research
• /
• v.19 no.4
• /
• pp.387-393
• /
• 2014

The purpose of this study is to evaluate integrated anaerobic hydrogen fermentation and membrane bioreactor (MBR) for on-site domestic wastewater treatment and resource recovery. A synthetic wastewater (COD 17,000 mg/L) was used as artificial brown water which will be discharged from urine diversion toilet and fed into a continuous stirred tank reactor (CSTR) type anaerobic reactor with inclined plate. The effluent of anaerobic reactor mixed with real household grey water (COD 700 mg/L) was further treated by MBR for reuse. An optimum condition maintained in anaerobic reactor was HRT of 8 hrs, pH 5.5, SRT of 5 days and temperature of $37^{\circ}C$. COD removal of 98% was achieved from the overall system. Total gas production rate and hydrogen content was 4.6 L/day and 52.4% respectively. COD mass balance described the COD distribution in the system via reactor byproducts and effluent COD concentration. The results of this study asserts that, anaerobic hydrogen fermentation combined with MBR is a potent system in stabilizing waste strength and clean hydrogen recovery which could be implemented for onsite domestic wastewater treatment and reuse.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.288-293
• /
• 2017

In this study, we report the industrial application of an efficient technology for the recovery of gallic acid from Chinese nutgall processing wastewater. The recovery of gallic acid by industrial scale extraction and stripping devices was performed, with tributyl phosphate as the extractant and kerosene as the diluent. The results showed that the theoretical extraction stage was four, while the theoretical stripping stage was two. A closed-cycle system was studied for the continuous countercurrent extraction and stripping, with a five-stage extraction device and a three-stage reflux stripping device. The results showed that the multistage extraction-stripping system could steadily run for a long period, the average gallic acid level in the raffinate was $0.85g{\cdot}L^{-1}$, and the gallic acid content recovered in the strip liquor was higher than $120g{\cdot}L^{-1}$. The average extraction yield of gallic acid was 94.14%. When the strip liquor was used as raw material for production, the average production yield increased by 8.64%. In addition, after extraction, the $COD_{Cr}$ in the wastewater decreased by 38.19%, and the biodegradability of wastewater improved by 1.6 times. This study provided a new impetus for the sustainable development of the Chinese nutgall processing industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.550-555
• /
• 2008

An efficient production method of spirulina extract was developed by enzymatic treatment using proteolytic enzymes. The suitable dosage of Tunicase, a cell lytic enzyme, was used to be 2.0% (w/w). To maximize solid recovery and spirulina extraction (SE) index, which indicates nucleic acid-related substances content, the dosage of Alcalase, commercially available pretense, was found to be 1.0% (w/w). By simultaneous treatments using optimal dosages of Tunicase and Alcalase, the highest SE index and solid recovery were obtained. The SE index and solid recovery of simultaneous treatments were notably enhanced by 100% ($11.4%\;{\rightarrow}\;22.8%$) and 56% ($45.2%\;{\rightarrow}\;70.7%$), respectively, than those of the non-treated extracts.

• Korean Journal of Chemical Engineering
• /
• v.35 no.12
• /
• pp.2413-2420
• /
• 2018

Sida acuta, a common type of weed in Thailand, contains relatively high cellulose (42.7%) content. We pretreated NaOH to improve glucose recovery from S. acuta. The effect of pretreatment temperature and NaOH concentration was fundamentally investigated based on hydrolysis efficiency with recovery of solid fraction. The pretreatment condition was determined to be 3% NaOH at $60^{\circ}C$ for 9 h, which showed the highest glucose recovery. The hydrolysates obtained by enzymatic hydrolysis of S. acuta were applied to the fermentation of Saccharomyces cerevisiae K35, and a theoretical yield of 97.6% was achieved at 18 h. This indicated that the hydrolysates medium without detoxification had no negative effects on the fermentation. The production of biomass into bioethanol was evaluated based on the material balance of 1,000 g basis. Following this estimation, approximately 28 g and 110 g bioethanol could be produced by untreated and pretreated S. acuta, respectively, and this production was improved about 3.9-fold by NaOH pretreatment. These results again show the importance of pretreatment in biorefinery process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4572-4586
• /
• 2019

Mobile Edge Computing (MEC) and Information-Centric Networking (ICN) are essential network architectures for the future Internet. The advantages of MEC and ICN such as computation and storage capabilities at the edge of the network, in-network caching and named-data communication paradigm can greatly improve the quality of video streaming applications. However, the packet loss in wireless network environments still affects the video streaming performance and the existing loss recovery approaches in ICN does not exploit the capabilities of MEC. This paper proposes a Deep Learning based Loss Recovery Mechanism (DL-LRM) for video streaming over MEC based ICN. Different with existing approaches, the Forward Error Correction (FEC) packets are generated at the edge of the network, which dramatically reduces the workload of core network and backhaul. By monitoring network states, our proposed DL-LRM controls the FEC request rate by deep reinforcement learning algorithm. Considering the characteristics of video streaming and MEC, in this paper we develop content caching detection and fast retransmission algorithm to effectively utilize resources of MEC. Experimental results demonstrate that the DL-LRM is able to adaptively adjust and control the FEC request rate and achieve better video quality than the existing approaches.