• Clean Technology
• /
• v.25 no.4
• /
• pp.289-295
• /
• 2019

Though the usage of vinyls and plastics produced from fossil fuels has been increasing in the world, the eco-friendly domestic disposal or recycling of waste vinyls has to be executed because the migration or importation of waste vinyls or waste plastics are globally prohibited. Even though the eco-friendly domestic disposal or recycling of waste vinyls and waste plastics should be developed, promising eco-friendly recycling methods are few because there are extraneous substances in waste vinyls and waste plastics. Also, conventional incineration and landfill methods result in secondary contamination and then increase disposal costs. Therefore, the selective elimination of extraneous substances or other materials included in waste vinyls and waste plastics could make valuable recycling or reuse possible. In particular, the novel hybrid process in which crushing and screening are simultaneously conducted in a rotary kiln type reactor can domestically maximize the material recycling or reuse. In this study, the feasibility study for a crushing/screening hybrid process developed in Korea was performed and evaluated in case of thermal recycling (TR) and material recycling (MR). The effect of various subsidies on economic efficiency was especially evaluated by means of domestic recycling plans. The incentive revenues from waste vinyl recycling and the incineration share of waste vinyls affected the net present values and internal rate of returns of the hybrid process.

• Journal of Korean Academy of Nursing
• /
• v.31 no.1
• /
• pp.81-93
• /
• 2001

The purpose of this study was to develop a continuing nursing care program for cancer patients and the caregivers staying at their home and to test its effects on patients' symptom distress, caregiver burden, and satisfaction of life. The continuing nursing care program was based on the homecare needs of cancer patients, and was provided by three clinical nurses who took care of the patients while they were hospitalized. The program consisted of discharge education about selfcare using education materials(book and handout) and provisions of direct care. These were counselling and education during which visiting patients' home one week after discharge and telephone counseling two weeks after discharge. Counseling by telephone was always available during the research period. A quasi-experimental research design was used to test the effects of the program. Subjects for this study were 53 cancer patients discharged from the hospital and caregivers. These subjects were assigned to an experimental group (n=23) receiving continuous nursing care, or to a control group (n=30) not receiving continuous nursing care. Data from control group was collected first to protect from contamination. Data collection was done from October of 1998 to February of 2000. The collected data was analysed using mean, t-test, and chi-square test computed by SPSS software. The summary of results was as follows: 1) The symptom distress was a little decreased at posttest, but there were no significant differences between the experimental and the control group in symptom distress. 2) The score of caregiver burden was significantly decreased in experimental group at posttest, but no differences in control group. 3) There were no significant differences between the experimental and control group in the satisfaction of life. 4) The score of satisfaction of continuing nursing care program in experimental group at posttest was 2.321 of 3. In conclusion, even though this study did not obtain evidence of effectiveness of continuing nursing care program on patients, such as. It is still expected to be effective by a more improved program. Therefore we want to give some suggestions for further studies. 1) It is needed to make a communication channel with the patient's doctor to response promptly and appropriately to patient's conditions. 2) The research is necessary on patients in terminal stage or early stage of cancer diagnosis who have many nursing needs. 3) It is needed to readjust the roles and job assignment of clinical nurse to implement effectively as a program provider.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.65-65
• /
• 2015

In this talk, I will introduce two topics. The first topic is the polymer light emitting diodes (PLEDs) using graphene oxide quantum dots as emissive center. More specifically, the energy transfer mechanism as well as the origin of white electroluminescence in the PLED were investigated. The second topic is the facile synthesis of eco-friendly III-V colloidal quantum dots and their application to light emitting diodes. Polymer (organic) light emitting diodes (PLEDs) using quantum dots (QDs) as emissive materials have received much attention as promising components for next-generation displays. Despite their outstanding properties, toxic and hazardous nature of QDs is a serious impediment to their use in future eco-friendly opto-electronic device applications. Owing to the desires to develop new types of nanomaterial without health and environmental effects but with strong opto-electrical properties similar to QDs, graphene quantum dots (GQDs) have attracted great interest as promising luminophores. However, the origin of electroluminescence (EL) from GQDs incorporated PLEDs is unclear. Herein, we synthesized graphene oxide quantum dots (GOQDs) using a modified hydrothermal deoxidization method and characterized the PLED performance using GOQDs blended poly(N-vinyl carbazole) (PVK) as emissive layer. Simple device structure was used to reveal the origin of EL by excluding the contribution of and contamination from other layers. The energy transfer and interaction between the PVK host and GOQDs guest were investigated using steady-state PL, time-correlated single photon counting (TCSPC) and density functional theory (DFT) calculations. Experiments revealed that white EL emission from the PLED originated from the hybridized GOQD-PVK complex emission with the contributions from the individual GOQDs and PVK emissions. (Sci Rep., 5, 11032, 2015). New III-V colloidal quantum dots (CQDs) were synthesized using the hot-injection method and the QD-light emitting diodes (QLEDs) using these CQDs as emissive layer were demonstrated for the first time. The band gaps of the III-V CQDs were varied by varying the metal fraction and by particle size control. The X-ray absorption fine structure (XAFS) results show that the crystal states of the III-V CQDs consist of multi-phase states; multi-peak photoluminescence (PL) resulted from these multi-phase states. Inverted structured QLED shows green EL emission and a maximum luminance of ~45 cd/m2. This result shows that III-V CQDs can be a good substitute for conventional cadmium-containing CQDs in various opto-electronic applications, e.g., eco-friendly displays. (Un-published results).

• Journal of Food Hygiene and Safety
• /
• v.22 no.3
• /
• pp.192-198
• /
• 2007

Kimchi is one of the representative traditional foods in Korea, which is recognized as a kind of wellbeing foodstuffs. However, as increasing foreign-made Kimchi, its safety as food is at the forefront of public health concerns. We analyzed the washing methods of Chinese cabbages, which are the main materials in Kimchi, to prevent parasite contamination during preparing it. To decontaminate parasite eggs from Chinese cabbages, discard the discolored outer leaves from cabbages, spread the space of leaves with fingers and rinse more than 3 separate water tanks with streaming water (velocity more than 0.8m/sec). At each tank, Chinese cabbages were rinsed with more than 3 strokes upward and downward within the streaming water followed by moving back and forth more than 3 times, with 20cm in height and 30cm in width, respectively. Decontamination efficiency increased higher in parallel with streaming velocity of water, and with adding the vegetable detergent to the tank water.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.6
• /
• pp.21-29
• /
• 2008

As household and industrial wastes continue to rapidly increase every year, the demands for landfill sites are also increasing. However, the construction of landfill sites causes many problems due to the high costs of liners, while the leachate from the landfills generates secondary contamination of surrounding lands and groundwater. The purpose of this study is to determine the proper mixing ratio to meet the liner conditions (must be less than $1{\times}10^{-7}cm/sec$), using the local soil as the main material and using fly ash, bentonite, and cement as the mixing materials. The possibility of using this mixture as the liner for landfill sites was examined. To determine the proper mixing ratio, this study conducted basic physical properties tests, compaction tests, consolidation tests, and uniaxial compression tests. It was found that the higher the ratio of bentonite, the lower the coefficient of permeability, and the higher the ratio of fly ash, the higher the coefficient of permeability. The reason for this is that, while bentonite expands and fills pores, fly ash cannot fill the pores because the particles have a round shape and do not have adhesion. In conclusion, the optimum coefficient of permeability that meets the landfill liner condition was obtained when the ratio of bentonite was 15% or higher. If fly ash was mixed, the landfill liner condition was met when the ratio of bentonite was 15% or higher and the ratio of fly ash was 20% or lower.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.3
• /
• pp.457-463
• /
• 2013

The purpose of this study was to apply the Hazard Analysis Critical Control Point (HACCP) system to the production of dressing. The hazard analysis examined the main materials, industrial water, microbial evaluation, and airborne microorganisms of each working area, as well as the pathogenic microbial contamination risk. The survey was conducted at SJ Company in Jincheon (Chungchengbuk-do), Korea for 30 days from April 1, 2012 to April 30, 2012. The results showed that raw material microorganisms had a total plate count in industrial water below $3.00{\times}10$ CFU/mL in working room I, working room II, the packing room, washing water, and the inspection room for five times in each place. During dressing production (including heat treatment and mixing), general bacteria were detected at an average of $3{\times}10$ CFU/mL, but yeast, mold, and pathogenic bacteria were not detected. Airborne microbiological evaluation (for total plate count, yeast, and mold) found levels below the legal limit at each working area. While workers were positive for microbes in total plate counts, coliform and Staphylococcus aureus were not detected. In conclusion, standards for hygienic management should be established to prevent and decrease hazards, such as general bacteria and pathogenic microorganisms (for example, E. coli, B. cereus, Listeria spp, Salmonella spp, Staph. aureus, Clostridium perfringens, yeast, and mold), and to found critical limits for microorganisms with an HACCP system.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.157-167
• /
• 2012

This study aimed to interpret the provenance and firing temperature of pottery from Chipyeongdong site in Gwangju, Korea though mineralogical and geochemical methods and also investigated the post-depositional alteration of pottery in burial environments. It is also presumed that they were made of soils near the site because they have similar mineralogical composition and same geochemical evolution path. Based on the results of mineralogical analysis, the pottery samples are largely divided into 2 groups; $700^{\circ}C$ to $1,000^{\circ}C$ and 1,000 to $1,100^{\circ}C$. At some pottery fired at over $1,000^{\circ}C$, it is thought that the refinement of raw materials were processed to remove macrocrystalline fragments. However, it was found that phosphate in soil environments formed amorphous aggregates with Al and Fe within the pores and voids on pottery fired at the low temperature. It indicates the contamination of pottery after burial.

• Radiation Oncology Journal
• /
• v.10 no.2
• /
• pp.147-153
• /
• 1992

It is ideal thing to compensate tissue deficit without skin contamination in curvatured irradiation field of high energy photon beam. The 3-dimensional compensating technique utilizing tissue equivalent materials to ensure an adequate dose distribution and skin sparing effect was described. This compensator was made of paraffin ($70\%$) and stearin wax ($30\%$) compound. The parameters for evaluation of the effect on skin dose in application of compensator were considered in the size of the field, the thickness of the compensator and the source-to-axis distance. The results are as follows; the skin doses were not changed even though application of the compensator, but depended on the field size and the source-to-axis distance, and the skin doses were only slightly changed within $1\%$ relative errors as increasing the thickness of the compensator in these experiments.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.62-67
• /
• 2011

This study has been investigated for characteristic of removal on the effect of changes in soil moisture, microwave power, and temperature through the decomposition of oil-contaminated soil under high temperature conditions with high temperature heating elements and microwave. A lubricating oil having long carbocyclic(C18-C50) commonly known as a non-resolvable material was treated and the efficient for removal of TPH(Total Petroleum Hydrocarbon) obtained 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was found to be removed to 1788 mg/kg for 40 minutes. In case of contaminated soil by light oil and gasoline, the amount of removal was achieved with 567 mg/kg at 6 kW, 500 for 20 minutes that corresponds to reach 98.4% of treatment efficient. In addition, non-resolvable materials contaminated by oil reached TPH concentration on 2,000 mg/kg of worrisome level of soil contamination in the 3-zone at 6kW, $700^{\circ}C$, and 30 minutes, and processing cost at this time was about 8,173 won per ton.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.116-121
• /
• 2007

TiNi shape memory alloy(SMA) was fabricated by PLD(plused laser deposition) using equiatomic TiNi target. Composition and crystallization of TiNi thin films which were fabricated in ambient Ar gas(200m Torr)and vacuum($5{\times}10^{-6}\;Torr$) were investigated. Composition of TiNi thin films was characterized by energy-dispersive X-ray spectrometry (EDXS) and crystallization was confirmed by X-ray diffraction (XRD). The composition of films depends on the distance between target and substrate but does not sensitively depend on the substrate temperature. It is found that the composition of films can be easily controlled when substrate is placed inside plume in ambient Ar gas. It is also found that the in situ crystallization temperature ($ca.\;400^{\circ}C$) in ambient Ar gas is lowered in comparison with that of TiNi film prepared under vacuum. The low crystallization temperature in ambient Ar gas makes it possible to prepare the crystalline TiNi thin film without contamination.