• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.4
• /
• pp.389-403
• /
• 2019

Large amounts of concrete waste are likely to arise from the decommissioning of a Kori-1 nuclear power plant. Several studies have been conducted on decommissioning concrete waste in recent decades, however, they have been limited to contaminated concrete issues or were small pilot-scale experiments. This study constructed two industrial-scale models of on-site concrete waste management for clean as well as contaminated concrete. To evaluate the performance of both the models, simulations were conducted using the Flexsim software. The concrete particle size distribution of Kori-1 and concrete processor properties based on widely used construction equipment were used as sources of input data for the simulations. It was observed that it may take over two years to complete the on-site concrete management processes owing to the performance of existing processors. In addition, it was demonstrated that it is essential to identify bottlenecks in the system and enhance the performance of the relevant processors to avoid delays of the decommissioning schedule. Our results suggest that this novel approach can contribute to developing schedules or expediting delayed activities in the Kori-1 decommissioning project.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.290-299
• /
• 2005

Two decommissioning projects are carried out at the KAERI (Korean Atomic Energy Research Institute), one for the Korea research reactors, KRR-1 and KRR-2, and another for the uranium conversion plant (UCP). The concept of the management of the wastes from the decommissioning sites was reviewed with a relation of the decommissioning strategies, technologies for the treatment and the decontamination, and the characteristics of waste. All the liquid waste generated from KRR-1 and KRR-2 decommissioning site is evaporated by a solar evaporation facility and all the liquid waste from the UCP is treated together with lagoon sludge waste. The solid wastes from the decommissioning sites are categorized into three groups; not contaminated, restricted releasable and radioactive waste. The not-contaminated waste will be reused and/or disposed at an industrial disposal site, and the releasable waste is stored for the future disposal at the KAERI. The radioactive waste is packed in containers, and will be stored at the decommissioning sites till they are sent to a national repository site. The reduction of the radioactive solid waste is one of the strategies for the decommissioning projects and could be achieved by the repeated decontamination. By the achievement of the minimization strategy, the amount of radioactive waste was reduced and the disposal cost will be reduced, but the cost for manpower, for direct materials and for administration was increased.

• Journal of the korean society of oceanography
• /
• v.39 no.3
• /
• pp.197-206
• /
• 2004

Mussel, Mytilus galloprovincialis, was transplanted reciprocally between contaminated site (St. STP) and relatively less contaminated site (St. UB) in Onsan Bay, Korea in order to estimate heavy metal accumulation and release. Transplanted and indigenous mussels were collected 8 times over 108 days deployment at both sites and analyzed for Cd, Cu, Pb and Zn using ICP/MS. Cu and Zn concentration did not show any significant differences between transplanted and indigenous mussels throughout the experiment period, although dissolved Cu and Zn concentrations in seawater were significantly higher at contaminated site. Pb accumulated rapidly, while Cd did not show any accumulation in the mussels transplanted from St. UB to St. STP. These accumulation patterns might reflect the variation of dissolved metal concentration; dissolved Pb concentration was significantly higher in St. STP than St. UB, while dissolved Cd concentration was similar between both sites throughout this experiment. Release of Cd and Pb in the mussels transplanted from St. STP to St. UB was not significant during the transplantation period. The levels and variation of Pb and Cd concentrations in mussels transplanted from St. STP to St. UB were similar to those in the indigenous mussels at St. STP throughout the period. Therefore, Cd and Pb accumulated in indigenous mussels may indicate the integrated metals throughout their lives, not responding to the present status of seawater because the release of accumulated metals in mussels occurs very slowly when the seawater metal levels are lowered. On the other hand, since the transplanted mussels can respond immediately to the levels of metals in seawater, it may be suggested that the present status of heavy metals in seawater can be only acquired from the metal levels of mussels transplanted from clean environments.

• Environmental Engineering Research
• /
• v.12 no.4
• /
• pp.176-193
• /
• 2007

The ability to measure groundwater contaminant flux is increasingly being recognized as crucial in order to prioritize contaminated site cleanups, estimate the efficiency of remediation technologies, measure rates of natural attenuation, and apply proper source terms to model groundwater contaminant transport. Recently, a number of methods have been developed and subsequently applied to measure contaminant mass flux in groundwater in the field. Flux measurement methods can be categorized as either point methods or integral methods. As the name suggests, point methods measure flux at a specific point or points in the subsurface. To increase confidence in the accuracy of the measurement, it is necessary to increase the number of points (and therefore, the cost) of the sampling network. Integral methods avoid this disadvantage by using pumping wells to interrogate large volumes of the subsurface. Unfortunately, integral methods are expensive because they require that large volumes of contaminated water be extracted and managed. Recent work has investigated the development of an integral method that does not require extraction of contaminated water from the subsurface. We begin with a review of the significance and importance of measuring groundwater contaminant mass flux. We then review groundwater contaminant flux measurement methods that are either currently in use or under development. Finally, we conclude with a qualitative comparison of the various flux measurement methods.

• Journal of Environmental Impact Assessment
• /
• v.25 no.5
• /
• pp.333-344
• /
• 2016

In this study, the efficiency of natural attenuation was evaluated through the hydrogeological characteristics such as monitoring and analyses, tracer tests, chemical composition analysis of the groundwater at a military site contaminated by petroleum hydrocarbon in korea. Also, based on the results, the natural attenuation rate by distance and the expressed biodegradation capacity(EBC) was evaluated. The regression slope of -0.0248($K/V_x$) and bulk attenuation rate of $1.7{\times}10^{-3}/day$ were calculated respectively. The range of total expressed biodegradation capacity(EBC) of BTEX was shown from 9.1 mg/L to 10.0 mg/L(average 9.7 mg/L). It was confirmed that the denitrification which was expressed about 63.6% in the total EBC is the largest influence redox process. Consequently, the biodegradation capacity is considered to be sufficient for remediation in the BTEX average concentration of 1.326 mg/L.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.4
• /
• pp.90-96
• /
• 2003

This study was performed to evaluate effect of extraction mode on SVE efficiency for fuel-contaminated soil. A gas station was selected for this study. As a result of pressure test in well head, soil texture of contaminated site under the gas station was very different from site to site. SVE system was operated in intermittent mode (1hr extraction / 3hr rest) or continuous mode. Capacity of air blower was $1m^3/min$. Extration mode test was conducted in two severe contaminated sites. In both two sites, cumulative TPHgas mass of intermittent extraction mode was higher than that of continuous mode. Considering long term operation of SVE in a field, in general, it was thought that intermittent extraction mode was effective in view of vaporized TPHgas mass and electrical cost.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.914-919
• /
• 2008

This present was carried out to evaluate the adaptability of stabilization method which was used industrial byproducts as the stabilization agency in the abandoned mine site. In order to investigate stabilization effect on As-contaminated soils treated by industrial by-products, batch tests and column tests were carried out with As-contaminated soils collected from farmland around the abandoned mine site. ZVI(zero valent iron) and SRS(steel refining slag) was shown a good treatment effect. After the column test, sequential extraction test and simple bioavailability extraction test(SBET) were carried out to analysis of the soil, and scanning electron micrograph(SEM) analysis was carried out to compare the morphology and structure of ZVI and SRS before and after reacting with arsenic in the soil. As a result, ZVI and SRS were shown 93%, 62% reduction of As concentration respectively by comparison with untreated soils. Therefore, if ZVI and SRS are used as treatment materials in As-contaminated soils, it is expected that the As leaching from soils is reduced effectively.

• Journal of Korea Soil Environment Society
• /
• v.4 no.2
• /
• pp.163-174
• /
• 1999

This paper presents a case history of remedial action adopted for contaminated groundwater in a landfill. The objectives of the projects are : (1) to effectively confine contaminated groundwater with an economically reasonable means, (2) to prevent further contamination of soil by collecting and treat the contaminant. and (3) to assure the environmental safety of the landfill during its operating period. Reported are the process from site investigation, through design and construction of an appropriate remedial action, to the monitoring of the selected confinement system. In view of the results of site investigation, deep soil mixing cutoff wall using the DMW(deep soil mixing cutoff wall) method and specially produced HEC soil stabilizer were used for the construction of deep soil mixing cutoff wall. For rock foundation with sever fractures, chemical grout curtain with urethane was installed. The monitoring results to date indicate that the selected vertical barrier performed satisfactorily.

• Genes and Genomics
• /
• v.40 no.11
• /
• pp.1127-1136
• /
• 2018

The Greater Sudbury Region has been known as one of the most ecologically disturbed areas in Canada for the past century. Plant adaptation to environmental stressors often results in modifications in gene expression at the transcriptional level. The main objective of the present study was to compare the expression of genes associated with nickel resistance in Acer rubrum and Populus tremuloides growing in areas contaminated and uncontaminated with metals. Primers targeting Nramps4, Nas 3, At2G, MRP4 and alpha-tubulin genes were used to amplify cDNA of both species. The expression of the At2G gene, was $2{\times}$ and $9{\times}$ higher in P. tremuloides than in A. rubrum for St. Charles (uncontaminated site) and Kelly Lake (metal contaminated site), respectively. There was a much smaller difference between the two species for the Nramps 4 gene as its expression was $2.5{\times}$ and $3{\times}$ higher in P. tremuloides compared to A. rubrum from St. Charles and Kelly Lake, respectively. The same trend was observed for the MRP4 gene whose expression was $2{\times}$ and $14{\times}$ higher in P. tremuloides than in A. rubrum from St. Charles and Kelly Lake, respectively. For the Nas 3 gene, the expression was similar in both sites. This gene was upregulated $11{\times}$ and $10{\times}$ in P. tremuloides compared to A. rubrum in samples from St. Charles and Kelly Lake, respectively. In general, no significant difference was observed between the metal contaminated and uncontaminated sites for gene expression. In depth analysis revealed that AT2G and MRP4 genes were significantly down regulated in A. rubrum from the metal contaminated sites compared to those from uncontaminated areas, but environmental factors driving this differential gene expression couldn't be established.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.525-539
• /
• 2020

A site containing buried solid waste and treated water and oil storage containers from a leather manufacturing plant was studied through soil and groundwater pollution and electrical resistivity surveys with the aim of identifying areas polluted by leachate generated by landfilling with leather waste and leakage wastewater. It was found that TPH and Zn exceeded environmental standards for soil pollution and, for leachate and groundwater, Cr(VI) concentrations exceeded standard levels for groundwater quality. An electrical resistivity survey was used to elucidate soil and groundwater pollution characteristics and diffusion pathways. Ten survey lines were set up with an electrode spacing of 5 m in a dipole-dipole array. The hydraulic characteristics of soil determined by groundwater contamination surveys matched well the low-resistivity-anomaly zones. Electrical resistivity surveys of areas containing contaminated soil and groundwater that have irregular strata due to waste reclamation are thus useful in highlighting vertical and horizontal pollutant diffusion pathways and in monitoring contaminated and potentially contaminated areas.