• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.290-297
• /
• 2008

STATEMENT OF PROBLEM: Implant-supported fixed cantilever prostheses are influenced by various biomechanical factors. The information that shows the effect of implant number and position of cantilever on stress in the supporting bone is limited. PURPOSE: The purpose of this study was to investigate the effect of implant number variation and the effect of 2 different cantilever types on stress distribution in the supporting bone, using 3-dimensional finite element analysis. MATERIAL AND METHODS: A 3-D FE model of a mandibular section of bone with a missing second premolar, first molar, and second molar was developed. $4.1{\times}10$ mm screw-type dental implant was selected. 4.0 mm height solid abutments were fixed over all implant fixtures. Type III gold alloy was selected for implant-supported fixed prostheses. For mesial cantilever test, model 1-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 1-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 1-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with mesial cantilever were simulated. And then, 155N oblique force was applied to the buccal cusp of second premolar. For distal cantilever test, model 2-1 which has three $4.1{\times}10$ mm implants and fixed prosthesis with no pontic, model 2-2 which has two $4.1{\times}10$ mm implants and fixed prosthesis with a central pontic and model 2-3 which has two $4.1{\times}10$ mm implants and fixed prosthesis with distal cantilever were simulated. And then, 206N oblique force was applied to the buccal cusp of second premolar. The implant and superstructure were simulated in finite element software(Pro/Engineer wildfire 2.0). The stress values were observed with the maximum von Mises stresses. RESULTS: Among the models without a cantilever, model 1-1 and 2-1 which had three implants, showed lower stress than model 1-2 and 2-2 which had two implants. Although model 2-1 was applied with 206N, it showed lower stress than model 1-2 which was applied with 155N. In models that implant positions of models were same, the amount of applied occlusal load largely influenced the maximum von Mises stress. Model 1-1, 1-2 and 1-3, which were loaded with 155N, showed less stress than corresponding model 2-1, 2-2 and 2- 3 which were loaded with 206N. For the same number of implants, the existence of a cantilever induced the obvious increase of maximum stress. Model 1-3 and 2-3 which had a cantilever, showed much higher stress than the others which had no cantilever. In all models, the von Mises stresses were concentrated at the cortical bone around the cervical region of the implants. Meanwhile, in model 1-1, 1-2 and 1-3, which were loaded on second premolar position, the first premolar participated in stress distribution. First premolars of model 2-1, 2-2 and 2-3 did not participate in stress distribution. CONCLUSION: 1. The more implants supported, the less stress was induced, regardless of applied occlusal loads. 2. The maximum von Mises stress in the bone of the implant-supported three unit fixed dental prosthesis with a mesial cantilever was 1.38 times that with a central pontic. The maximum von Mises stress in the bone of the implant-supported three-unit fixed dental prosthesis with a distal cantilever was 1.59 times that with a central pontic. 3. A distal cantilever induced larger stress in the bone than a mesial cantilever. 4. A adjacent tooth which contacts implant-supported fixed prosthesis participated in the stress distribution.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.1
• /
• pp.13-30
• /
• 2002

Industrial shift workers feels suffer mental stresses which are caused by unfamiliar day sleep, noisy environment, sleeping disorder by bright light, unusual contacts with family, difficulty in meeting with friends or having formal social meetings and other social limitations such as the use of transportation. Such stresses influence health of the workers negatively. Thus the health promotion policy for shift workers should be made considering the workers' ways of living and shift work specially. This study attempted to provide basic information for development of the health promotion program for industrial shift workers by examining predictive factors influencing health promotion behaviors of those workers. In designing the study, three power generation plants located in Pusan and south Kyungsang province were randomly selected and therefrom 280 workers at central control, boiler and turbine rooms and environmental chemistry parts whose processes require shift works were sampled as subjects of the study. Data were collected two times from September 17 to October 8, 1999 using questionnaires with helps of safety and health managers of the plants. The questionnaires were distributed through mails or direct visits. Means for the study included the measurement tool of health promotion behavior provided by Park(1995), the tool of self-efficacy measurement by Suh(1995), the tool of internal locus of control measurement by Oh(1987), the measurement tool of perceived health state by Park(1995) and the tool of social support measurement by Paek(1995). The collected data were analyzed using SPSS program. Controlling factors of the subjects were evaluated in terms of frequency and percentage ratio Perceived factors and health promotion behaviors of the subjects were done so in terms of mean and standard deviation, and average mark and standard deviation, respectively. Relations between controlling and perceived factors were analyzed using t-test and ANOVA and those between perceived factors and the performance of health promotion behaviors, using Pearson's Correlation Coefficient. The performance of health promotion behaviors was tested using t-test, ANOVA and post multi-comparison (Scheffe test). Predictive factors of health promotion behavior were examined through the Stepwise Multiple Regression Analysis. Results of the study are summarized as follows. 1. The performance of health promotion behaviors by the subjects was evaluated as having the value of mean, $161.27{\pm}26.73$ points(min.:60, max.:240) and average mark, $2.68{\pm}0.44$ points(min.:1, max.:4). When the performance was analyzed according to related aspects, it showed the highest level in harmonious relation with average mark, $3.15{\pm}.56$ points, followed by hygienic life($3.03{\pm}.55$), self-realization ($2.84{\pm}.55$), emotional support($2.73{\pm}.61$), regular meals($2.71{\pm}.76$), self-control($2.62{\pm}.63$), health diet($2.62{\pm}.56$), rest and sleep($2.60{\pm}.59$), exercise and activity($2.53{\pm}.57$), diet control($2.52{\pm}.56$) and special health management($2.06{\pm}.65$). 2. In relations between perceived factors of the subjects(self-efficacy, internal locus of control, perceived health state) and the performance of health promotion behaviors, the performance was found having significantly pure relations with self-efficacy (r=.524, P=.000), internal locus of control (r=.225, P=.000) and perceived health state(r=.244, P=.000). The higher each evaluated point of the three factors was, the higher the performance was in level. 3. When relations between the controlling factors(demography-based social, health-related, job-related and human relations characteristics) and the performance of health promotion behaviors were analyzed, the performance showed significant differences according to marital status (t=2.09, P= .03), religion(F=3.93, P= .00) and participation in religious activities (F=8.10, P= .00) out of demography-based characteristics, medical examination results (F=7.20, P= .00) and methods of the collection of health knowledge and information(F=3.41, P= .01) and methods of desired health education(F=3.41, P= .01) out of health-related characteristics, detrimental factors perception(F=4.49, P= .01) and job satisfaction(F=8.41, P= .00) out of job-related characteristics and social support(F=14.69, P= .00) out of human relations characteristics. 4. The factor which is a variable predicting best the performance of health promotion behaviors by the subjects was the self-efficacy accounting for 27.4% of the prediction, followed by participation in religious activities, social support, job satisfaction, received health state and internal locus of control in order all of which totally account for 41.0%. In conclusion, the predictive factor which most influence the performance of health promotion behaviors by shift workers was self-efficacy. To promote the sense, therefore, it is necessary to develop the nursing intervention program considering predictive factors as variables identified in this study. Further industrial nurses should play their roles actively to help shift workers increase their capability of self-management of health.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.469-478
• /
• 2003

Internet information search engines using web robots visit servers conneted to the Internet periodically or non-periodically. They extract and classify data collected according to their own method and construct their database, which are the basis of web information search engines. There procedure are repeated very frequently on the Web. Many search engine sites operate this processing strategically to become popular interneet portal sites which provede users ways how to information on the web. Web search engine contacts to thousands of thousands web servers and maintains its existed databases and navigates to get data about newly connected web servers. But these jobs are decided and conducted by search engines. They run web robots to collect data from web servers without knowledge on the states of web servers. Each search engine issues lots of requests and receives responses from web servers. This is one cause to increase internet traffic on the web. If each web server notify web robots about summary on its public documents and then each web robot runs collecting operations using this summary to the corresponding documents on the web servers, the unnecessary internet traffic is eliminated and also the accuracy of data on search engines will become higher. And the processing overhead concerned with web related jobs on web servers and search engines will become lower. In this paper, a monitoring system on the web server is designed and implemented, which monitors states of documents on the web server and summarizes changes of modified documents and sends the summary information to web robots which want to get documents from the web server. And an efficient web robot on the web search engine is also designed and implemented, which uses the notified summary and gets corresponding documents from the web servers and extracts index and updates its databases.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.500-514
• /
• 1997

With respect to the amphibolites in the Mungyong area of the central part of the Ogcheon Fold Belt, detail field occurrence, texture and geochemical properties within each sills and petrogenetic environment are presented. We confirmed that the amphibolites in the Sangnaeri Formation (Ogcheon Supergroup) and limestone(Cambro-Ordovician Chosun Supergroup) sequences are metamorphosed dolerite sills which are roughly concordant to bedding of country rocks. Geologic distribution of the rocks is distinctly improved compared with those of previous investigations. There are four main sills so far observed in the study area. One is emplaced in limestone(Ls Sill, about 3 m thick) and the others are emplaced in Sangnaeri Formation, which are named First Sill(about 40 m thick), Second Sill(about 100 m thick) and Third Sill(about 40 m thick) from lower to upper horizons of the meta-pelitic sequences. The thick sills are intruded by minor sills and the Third Sill is a composite sill consisting of two main and two minor sills. Each sill has fine grained chilled marginal zones and grain size increases inwards from both contacts. The Second Sill has various vein and white patch in central part and the rock compositions vary systematically from margin to central part. $SiO_2,\;Na_2O,\;K_2O\;and\;P_2O_5$ increase, whereas $TiO_2,\;FeO,\;Al_2O_3\;and\;CaO$ decrease toward the contort. We investigate the major and trace element variations of ten selected rock compositions as intruding initial magma take occurrence and chemical properties into consideration. The compositional variations of them can not be explained by fractionation crystallization of single magma. Geologic distribution, geochemical properties and previous data suggest that amphibolite precursors(basaltic magma) of the study area were intrusive as sill-like in an intracontinental rift environment.

• Journal of Periodontal and Implant Science
• /
• v.25 no.3
• /
• pp.741-755
• /
• 1995

Currently titanium is the material of choice for implants because of its biological acceptance. This high degree of biocompatibility is thought to result, in part, from the protective and stable oxide layer that presumably aids in the bonding of the extracellular matrix at the implant-tissue interface. Endosseous dental implants are interfaced with bone, connective tissue, and epithelium when implanted into the jaw bone. The soft tissue interface including connective tissue and epithelium is one of the most critical factors in the determination of implant maintenance and prognosis. For maintenance of failing or failed implants, it is essential to treat the implant fixture surface to remove bacterial endotoxins and make a surface tolerated by surrounding soft and hard tissues. In this study, the effect of mechanical treatment on titanium plasma sprayed implant on adhesiveness and proliferation of human gingival fibroblasts and changed surface characteristics were studied. titanium plasma sprayed discs manufactured by Friedrichsfeld company were treated with loaw speed stone bur, a rubber point and a jetpolisher. Its surface components were analyzed with Energy dispersive X-ray spectroscopy to evaluate whether the surface characteristics were altered or not. To observe the spreading pattern of the human gingival fibroblasts which attached to the all specimens author used the scanning electron microscope. The results were as follows : Pure titanium and plasma sprayed titanium, stone polished titanium showed titanium peak and small amout of aluminum, so there was no alteration on surface characteristics. Under the scanning electron microscopic examination in the initial attachment of human gingival fibroblast, there was a slight enhancement in pure titanium, stone polished titanium than plasma sprayed titanium. After 6 hours, the pure titanium and stone polished titanium showed human gingival fibroblasts were elongated and connected with numerous processes. Human gingival fibroblasts were more intimately attached on the pure titanium discs than on the other discs. The human gingival fibroblasts attached on the plasma sprayed titanium by thin and elongated processes. After 24 hours, the human gingival fibroblasts connected with each other via numerous processes and compeletly covered the pure titanium and stone polshed titanium discs. Human gingival fibroblasts had multiple point contacts with more long and thin lamellopodia and showed a little bare surface on plasma sprayed titanium discs.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.3
• /
• pp.290-296
• /
• 2006

Background : IS6110 DNA fingerprint is a very useful tool for investigating the transmission of tuberculosis. The aim of this study was to identify the epidemiological situations within a given area (one province). Methods : The 681 Mycbobacterium tuberculosis isolates from patients, who were registered at health centers in Gyeonggi Province from May to December in 2004, were subjected to IS6110 DNA fingerprinting. Patients belonging to clusters were interviewed by health-workers to determine their previous contacts or household TB history. Results : The number of IS6110 copies of the 681 isolates showed diverse fingerprint patterns from 0 to 21 of which the most prevalent copy number was 10 from 120 isolates (17.6%). Thirty-three isolates (4.8%) belonged to the K strain, and 128 isolates (18.8%) belonged to the K family. There were 180 (26.4%) isolates belonged belonging to fifty clusters, of which two clusters were within household transmission. Forty-three (23.9%) out of 180 patients resided in an area under the same health center control. The rate of clusters in those aged 60-70 was higher than in any other age group ( 95% CI of RR : 1.072 ~ 1.988). Conclusion : This is the first report of an epidemiological survey based on a whole province using a DNA fingerprinting technique for M. tuberculosis. These results will be helpful in developing a program or policies to prevent the transmission of TB.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.15-28
• /
• 1995

This thesis focuses on the study of costume and ornaments of Shilla which had been severely affected by Uighur, and those of Uighur in Uighur self-governing district located in Shin Kang. East Turkestan, in Centrals Asia. This study aims to identifty the way of intergration of Uighur's costume and ornaments into Shilla, and orgins of Shill's costume and ornaments which had amix of internationl elelemnts thoursh cross exchanges, by comparing the differences between the two, and at the same time to clarify the pedigree of Korean costume and ornaments which are said to be udner a severe Chinese influence, by highlingting its uniqueness and originality . The result of the study demonstrates and originality of SHilla by melting foreign cultures into its own style in the process of accepting them. This means that the Shilla has recreated them in t도 form of simplification, and added naturalistic abstratness which is an element of Norther culture. The costume and ornaments are divided into coronets men's costuem, women's costume, and accessories 1. Coroncts A horse-riding man, and the costume type of 유고제 착유지체형 tell the Northern culture's influence on 백화수피기마인물채화담립 and patterns of a lotus flowr and arabesque show the 백화수피기마인물채색답립 has an influence of Buddhism with cluture of bordering countries of Western China , The origin of 뱍회수피제안형건(원정형, 방정형) lies in Northern cultures which can be found in ancient tombs of the Huns in noin-Ila , and stone caves of Jizil in Kochang. The wall paintings in Alexandropol, Murutuk and 돈황 No. 409 cave show that 초화형입식계금관 is under the influence of Northern culture, and Bezerkrick No, 25 cave and 회 번 in Kocho also show 수목녹각형입식관 is under the influence of Northern culture, with its origin in Novecherkaask. In this regard, the transformed coroncts of Shilla has shows a blended culture of Shilla with Nothern, Chinese, and Western cultures. 2. Men's Costume 반령포 derives from cultures of bordering countries of Western China centering around Uighur and Turkey. 연주문 in Uighur prince's costume and in Uighur paintings of Central Asia were reflected into the arts of Shilla in a direct way, and the motive of Uighur was deviatelly expressed at Shilla's arts in the form of simplicity , and naturalistic abstract paintings as in shown at 입수쌍조문 in tiles and brick. Along with this , 고착지체형 costume originates from Eurasia's Northern horseriding costumes as was shown in a golden man in B.C.4-5C which is now possessed by Kazakstan Republic Academy Archelogy Center Museum, and a golden figure from Skitai ancient caves, an the origin is carried away into wall paintings of Kizil No.14. cave in 8c and Astana's early period ancient tomb. No.6. 3. Women's Costume The hair styles of Shilla people are either 변발 or up -style with a lot of hair around it whose origin can be seen in Astana No.216 and No.187 caves of Kochang and Uighur's wall paintings of royal princess's hair style. Astana's middle period No. 206 and No.230 tombs reveal the its origin of 고착장군 while Astana early period No. 6 tomb shows that of 광유풍만형. 4. Accessories The earrings with small golden beads is seen at earring of figure holding a sword in wall painting of figure holding a sword in wall painting of Kizil in about 5 C. and those of a offering people in Sorchuk wall paintings. The earrings with small golden beads originates from a golden pendant of Shivargan, Afganistan, and golden pendants and other golden and metal accessories from Chrioba ancient tombs in Skiti Critia peninsula. Shilla's costume derives from the costume style of horse-ridding man, which proves the fact that Shilla people are horse-ridding peoplewith excellent horse-ridding techniques, and traditions. The people of Shilla are from horse-ridding people of local mounted momads in Northern part of Siberia steppe and this origin of Northern culture had been carried into Uighur in East Turkestan. At the same time , Shilla has a wealth and power since it was rich in gold and iron , thus producing lots of materials made of them. The results of this study emphasizes Shilla's identity and self-control by creating an independent an innovative heterogeneous culture since Shill's active exchanges with East Asia allowed it to accept the most civilized Uighur culture in East Turkestan among Altai languate which had frequent cross contacts with India and Europe.

• Management & Information Systems Review
• /
• v.31 no.2
• /
• pp.143-172
• /
• 2012

While e-commerce market(B2C) grows rapidly, many experts argue that EC(B2C) transactions have not reached its full potential. A notable difference between online and offline consumer markets that is suppressing the growth of EC(B2C) is the decreased presence of human and social elements in the online shopping environments. Generally online shopping lacks human warmth and sociability. In this study, social presence in online shopping mall was proposed as a substitute for face-to-face social interaction in the traditional commerce and author explored what variables affect social presence(human warmth and sociability) on online shopping malls and how human warmth and sociability can influence on online store loyalty. To achieve research objectives, we reviewed literatures related with marketing, psychology and communication research areas. Based on literature review, we proposed a research model on the online shopping mall. To examine the proposed research model, we gathered data by using a self-report questionnaire. Respondents consists of online shoppers with at least five or more times of purchase experience in online shopping malls. Because social presence is a feeling which needs frequent contacts with malls to experience, respondents must have enough purchase experiences. The empirical results are as follows : First, shopping mall's customization efforts influence perceived social presence on the mall significantly. Second, shopping mall's responsiveness influences perceived social presence significantly. Third, perceived activity of community of online shopping mall influences perceived social presence significantly. Mall managers have to activate their customer community to reinforce social presence, resulting in trust building. Finally, perceived social presence influences trust and enjoyment on the mall significantly. And then trust and enjoyment on the mall affect store loyalty significantly. From these findings it can be inferred that perceived social presence appears determinant which is critical to the formation of core variables(trust and loyalty) in existing online shopping papers.

• Economic and Environmental Geology
• /
• v.11 no.4
• /
• pp.127-141
• /
• 1978

The major structures characteristic of the Taebaegsan sedimentary basin were regionally analyzed with special reference to its southeastern extension to the Yeonhwa-Ulchin district of economic interest in zinc-lead mineralization. The basin geometry, basement setting, sedimentary components, and the characteristics of deformation and igneous activity of the Taebaegsan basin differ basically from those of the adjacent mobile belt of the Ogcheon geosyncline, although the latter affected the basin's western side considerably. The subrectangular shape of the Taebaegsan basin reflects the checkered pattern of basement-block arrangement, and the carbonate-dominated lithologic components of the basin-fill indicate a cratonic depositional setting, which is comparable to some of the North American mid-continental craton. The Taebaegsan basin, however, has somewhat been less stable than the North American megacraton that is reflected in the former's thicker sedimentary fill and steeper faults of later deformation, showing a tendency to increase in thickness close to the basement-block boundaries, which may indicate contacts of possibly detached cratonic blocks of Precambrian age; these weak zones of block boundaries have been the loci of repeated sedimentation, deformation and related igneous intrusions. A series of downthrown or uplifted tilted blocks, in which the Cambro-Ordovician sedimentary wedges and the late Cretaceous to early Tertiary igneous intrusives are involved, occurs intermittently across the Yeonhwa-Ulchin district in a noticeable pattern of en echelon type. These sedimentary wedges are correlated to the Cambro-Ordovician section of the Hambaeg syncline to the west in stratigraphy and lithology, and are considered to have resulted from the northeastern and/or northwestern cross-faulting of the pre-existing syncline belt of easterly trend, extended from the main portion of the Hambaeg syncline. These structural junctions (or intersections) of the earlier syncline belt and the later cross-faults have been acted as a guide to ascending igneous materials and hydrothermal ore-forming fluids to form a zone of zinc-lead skarn deposits across the Yeonhwa-Ulchin district showing a stepwise recurrence of these deposits toward the east.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.528-543
• /
• 2005

Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.