• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1300-1302
• /
• 2000

In the charge system, a contact type-convenient-charging method is insufficient because of the contact failure around moist environment and troublesome question to put in and pull out. For the solution of this problem, an electromagnetically coupled non-contact charger for the rechargeable cell is proposed using ZVS multi-resonant forward converter. In this paper magnetizing inductance, leakage inductance and coupling coefficient, k are observed. By using the obserbed value, the proposed circuit is simulated by the PSPICE and implemented and the peak voltage of switch and output power are measured.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.503-508
• /
• 2003

In this study, we peformed ahead a field geological investigation, boring investigation for slope stability analysis in large scale slope failure area. But the geological stratum was not clearly grasped, because ground was very disturbed by large scale Granite intrusion. Furthermore, the existing test data was not pertinent to the large scale Granite intrusion site like here. Therefore, various kind of field test were performed to grasp clearly for geological stratum. And the results of back analysis, various kind tests used to slope stability analysis.

• Tribology and Lubricants
• /
• v.30 no.2
• /
• pp.99-107
• /
• 2014

Fretting corrosion tests are conducted with a constant displacement amplitude using silver-plated brass coupons to investigate the effect of contact pressure on fretting corrosion. Three behaviors are identified based on the change in electric resistance and friction coefficient during the fretting test period, and the identified behaviors are dependent on the magnitude of the applied load. The failure cycle ($N_f$) with an electric resistance of 0.1 D cannot be achieved due to the adhesion behavior of the metal and metal contact under the higher applied load of 0.45 N. This suggests that an average contact pressure higher than 159 MPa for the silver-coated connector is desirable to gain an almost infinite lifetime. The relationship between the electric contact resistance (R) and the average contact pressure (p) can be written as $p=106.2{\times}{\Omega}^{-1.5}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.121-126
• /
• 2004

In this paper, the effects of the ozone oxidation of the landing polycrystalline silicon on the cell contact resistance of the DRAM device were studied. For this study, the ozone oxidation of the landing polycrystalline silicon layer was performed under various conditions, which was followed by the normal DRAM processes. Then, the cell contact resistance and $t_{WR}$ (write recovery time) of the devices were measured and analyzed. The experimental results showed that the cell contact resistance was more significantly increased for higher temperature of oxidation, longer time of oxidation, and higher concentration of ozone in the oxidation furnace. In addition, the TEM cross-sectional micrographs clearly showed that the oxide layer at the interface between the landing polycrystalline silicon layer and the plug polycrystalline silicon layer was increased by the ozone oxidation. Furthermore, the rate of the device failure due to too large write recovery time was also found to be well correlated with the increase of the cell contact resistance.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1996.10a
• /
• pp.210-217
• /
• 1996

Under strong shock loads including earthquake or blast, structures may start to crack in stress concentrated members. The continuous behavior of the structure changes to the discontinuous. In this study, numerical method analyzing continuous and discontinuous behavior of a structure is developed using a modified distinct element method. Equations of motion of each distinct element are integrated using the central difference method, one of the finite difference methods. Interactions between he elements are considered by an element and pore spring. The forces acting in the center of an element include contact stress transferred by element spring; tensile stress by pore spring; and external traction such as earthquake or blast load. To verify the proposed method, the behavior of the cantilever beam subject to the quasi-static concentrated force at the end is investigated. The failure behavior of the simply supported beam subject to the strong shock at the center is studied. The proposed method can predict the failure behavior of the structure due to the shock loading and the post-failure discontinuous behavior of the structure.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.406-411
• /
• 2001

This paper shows the failure(wear) phenomena of automotive transmission bearings and investigate their characteristics. It was found that the wear mechanism was mainly abrasive wear by the presence of particles in the gear box and the balls was weared more severely than the other tribological contacting parts. The wear of balls alter the bearing contact angle and load ratings, and finally it cause the bearing failure. With close examination of the failed bearing, various countermeasures could be suggested.

• International Journal of Railway
• /
• v.3 no.1
• /
• pp.34-37
• /
• 2010

In recent, the railway system consists of subsystems as rolling stock and infrastructures as signaling, telecommunication, power supply, overhead contact and platform screen door, etc. Furthermore, each subsystem has complicated interface so as not to understand these relationship. Consequently, to operate the railway system continuously with required safety and availability, the failure data should be corrected and analyzed systematically during operation. To achieve this object effectively, this paper presents the method which is evaluating the operational risk quantitatively using failure data, and selecting the critical equipment. Following this analysis, the improvement plan is established and applied to reduce the operational risk on system or equipment. From this study, the critical equipments of system could be determined and prioritized by risk analysis. Also, the effective maintenance to prevent critical failure could be implanted by this suggested methodology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.471-491
• /
• 2016

Traditional limit equilibrium method needs an assumption of the failure surface to calculate the bearing capapcity of the shallow foundation. From the viewpoint of the mechanics of granular materials, however, the failure of the soil mass is initated by the local buckling of the contact force chains. In this study we observed the directional distribution of the contact force chains in the granular assembly stacked by model particles subjected to the model shallow foundation during loading. Two sets of the assemblies with a regular structure and initially local imperfection were prepared for tests. Existence of the initial local imperfection has a significant effect on the directional distribution of the contact force chains. The bearing capacity of the assembly with local imperfection is only 67% the capacity of the assembly with the regular structure.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.15-25
• /
• 2018

Post-construction subgrade settlement especially differential settlement, has become a key issue in construction and operation of non-ballasted track on high-speed railway soil subgrade, which may also affect the dynamic performance of passing trains. To estimate the effect of differential subgrade settlement on the mechanical behaviors of the vehicle-slab track system, a detailed model considering nonlinear subgrade support and initial track state due to track self-weight is developed. Accordingly, analysis aiming at a typical high-speed vehicle coupled with a deteriorated slab track owing to differential subgrade settlement is carried out, in terms of two aspects: (i) determination of an initial mapping relationship between subgrade settlement and track deflections as well as contact state between track and subgrade based on a semi-analytical method; (ii) simulation of dynamic performance of the coupled system by employing a time integration approach. The investigation indicates that subgrade settlement results in additional track irregularity, and locally, the contact between the concrete track and the soil subgrade is prone to failure. Moreover, wheel-rail interaction is significantly exacerbated by the track degradation and abnormal responses occur as a result of the unsupported areas. Distributions of interlaminar contact forces in track system vary dramatically due to the combined effect of track deterioration and dynamic load. These may not only intensify the dynamic responses of the coupled system, but also have impacts on the long-term behavior of the track components.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.6
• /
• pp.700-711
• /
• 2011

The purposes of the study were to identify the online service attributes that contribute to online consumer experiences of satisfaction, service failure, and service recovery and to examine whether differences exist in these attributes between U.S. and Korea. E-A-S-QUAL provided a useful framework for the study. Focus group interviews and web surveys were conducted by utilizing college students in both countries. No significant cultural differences were found in online service dimensions of service satisfaction. Personalization was the most frequently mentioned online service dimension of service satisfaction both in the U.S. and Korea. The findings showed significant cultural differences in terms of online service dimensions responsible for service failure and recovery. For Korean consumers, merchandising was one of the key online service dimensions of service failure, while efficiency was the important service dimension resulting in service failure for the U.S. consumers. In addition, for U.S. consumers, efficiency and personalization were the two most frequently mentioned service dimension for service recovery, while Korean consumers put more importance on the contact and information dimensions for service recovery. This study provided a comprehensive list of online service attributes important to online apparel retailing.