• Journal of the Korean Society for Library and Information Science
• /
• v.58 no.2
• /
• pp.151-175
• /
• 2024

This study analyzes the current status of research data management at NST-affiliated government-funded research institutes for the purpose of promoting the sharing and use of research data, and based on this, suggests methods for establishing a research data sharing and management system. The survey on the status of research data management was conducted twice in 2022 and 2023 for a total of 20 research institutes. In addition, difficulties and areas that need to be improved in the management and sharing of research data were identified, and based on this, methods for establishing a research data sharing and management system were proposed by dividing them into policy aspects, system aspects, and linkage system construction aspects. In order to establish a research data sharing system, it would be desirable to prepare a policy basis and present contents such as the definition of research data, scope of application, contents of management, utilization method, and leading institutes. In addition, for systematic and unified research data management, it would be recommended that each institute will establish and manage a repository and management system. By linking this with DataON, the national research data platform, and providing one-stop services, the accessibility and usability of data will be improved.

• Journal of Space Technology and Applications
• /
• v.4 no.1
• /
• pp.27-47
• /
• 2024

In the New space era, satellites are being developed to perform on-orbit service (OOS) missions. Various missions for orbital service include failure repair, refueling, towing, component replacement, and space construction, and in order to do so, a robot arm payload must be mounted. Unlike conventional satellite payloads, the robot arm payload is not move in a fixed state, but is a payload that must move continuously to perform the mission. It is also characterized by the need to perform the mission while being directly exposed to outer space, rather than existing inside the structure of the satellite. Due to the characteristics of these payloads, thermal design and interpretation that can be operated smoothly in an extreme space thermal environment is essential, but there are not many papers on thermal design and interpretation of the robot arm. This paper introduces and summarizes cases of thermal design and interpretation of robot arm payloads developed so far, and finally, it intends to suggest directions for thermal design and interpretation of robot arm payloads to be developed in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.25 no.3
• /
• pp.147-153
• /
• 2013

There exist various types of the WEC (Wave Energy Converter), and among them, the point absorber is the most popularly investigated type. However, it is difficult to find examples of systematically measured data analysis for the design of the point absorber type of power buoy in the world. The study investigates the wave load acting on the point absorber type resonance power buoy wave energy extraction system proposed by Kweon et al. (2010). This study analyzes the time series spectra with respect to the three-year wave data (2002.05.01~2005.03.29) measured using the pressure type wave gage at the seaside of north breakwater of Hupo harbor located in the east coast of the Korean peninsula. From the analysis results, it could be deduced that monthly wave period and wave height variations were apparent and that monthly wave powers were unevenly distributed annually. The average wave steepness of the usual wave was 0.01, lower than that of the wind wave range of 0.02-0.04. The mode of the average wave period has the value of 5.31 sec, while mode of the wave height of the applicable period has the value of 0.29 m. The occurrence probability of the peak period is a bi-modal type, with a mode value between 4.47 sec and 6.78 sec. The design wave period can be selected from the above four values of 0.01, 5.31, 4.47, 6.78. About 95% of measured wave heights are below 1 m. Through this study, it was found that a resonance power buoy system is necessary in coastal areas with low wave energy and that the optimal design for overcoming the uneven monthly distribution of wave power is a major task in the development of a WEF (Wave Energy Farm). Finding it impossible to express the average spectrum of the usual wave in terms of the standard spectrum equation, this study proposes a new spectrum equation with three parameters, with which basic data for the prediction of the power production using wave power buoy and the fatigue analysis of the system can be given.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.318-325
• /
• 2011

Pitch pine (Pinus rigida Miller) retaining walls using Steel bar, of which the constructability and strength performance are good at the construction site, were manufactured and their strength properties were evaluated. The wooden retaining wall using Steel bar was piled into four stories stretcher and three stories header, which is 770 mm high, 2,890 mm length and 782 mm width. Retaining wall was made by inserting stretchers into Steel bar after making 18 mm diameter of holes at top and bottom stretcher, and then stacking other stretchers and headers which have a slit of 66 mm depth and 18 mm width. The strength properties of retaining walls were investigated by horizontal loading test, and the deformation of structure by image processing (AlCON 3D OPA-PRO system). Joint (Type-A) made with a single long stretcher and two headers, and joint (Type-B) made with two short stretchers connected with half lap joint and two headers were in the retaining wall using Steel bar. The compressive shear strength of joint was tested. Three replicates were used in each test. In horizontal loading test the strength was 1.6 times stronger in wooden retaining wall using Steel bar than in wooden retaining wall using square timber. The timber and joints were not fractured in the test. When testing compressive shear strength, the maximum load of type-A and Type-B was 130.13 kN and 130.6 kN, respectively. Constructability and strength were better in the wooden retaining wall using Steel bar than in wooden retaining wall using square timber.

• Clean Technology
• /
• v.12 no.2
• /
• pp.67-77
• /
• 2006

A simple dual sludge process, called as $KNR^{(R)}$ (Kwon's Nutrient Removal) system, was developed for small sewage treatment. It is a hybrid system that consists of an UMBR (Upflow multi-layer bioreactor) as anaerobic and anoxic reactor with suspended denitrifier and a post aerobic biofilm reactor, filled with pellet-like media, with attached nitrifier. To evaluate the stability and performance of this system for small sewage treatment, the pilot-scale $KNR^{(R)}$ plant with a treatment capacity of $50m^3/d$ was practically applied to the actual sewage treatment plant, which was under retrofit construction during pilot plant operation, with a capacity of $50m^3/d$ in a small rural community. The HRTs of a UMBR and a post aerobic biofilm reactor were about 4.7 h and 7.2 h, respectively. The temperature in the reactor varied from $18.1^{\circ}C$ to $28.1^{\circ}C$. The pilot plant showed stable performance even though the pilot plant had been the severe fluctuation of influent flow rate and BOD/N ratio. During a whole period of this study, average concentrations of $COD_{cr}$, $COD_{Mn}$, $BOD_5$, TN, and TP in the final effluent obtained from this system were 11.0 mg/L, 8.8 mg/L, 4.2 mg/L, 3.5 mg/L, 9.8 mg/L, and 0.87/0.17 mg/L (with/without poly aluminium chloride(PAC)), which corresponded to a removal efficiency of 95.3%, 87.6%, 96.3%, 96.5%, 68.2%, and 55.4/90.3%, respectively. Excess sludge production rates were $0.026kg-DS/m^3$-sewage and 0.220 kg-DS/kg-BOD lower 1.9 to 3.8 times than those in activated sludge based system such as $A_2O$ and Bardenpho.

• Korean Journal of Environment and Ecology
• /
• v.27 no.2
• /
• pp.219-229
• /
• 2013

This research is performed in order to suggest seasonal effective research time that is applied to wild birds research which lives in a forest. The subject area of this research is Mulgun-ri village forest in Samdong-Myeon, Namhe-gun. To investigate suitability of the project, existing land-use, existing vegetation, vegetational structure, and etc. of the subject and whole area are figured out. To suggest adequate research time, based on seasonal sun rise and set time for 3days, repetitive research is performed at hourly intervals. The subject area is connected with a forest and is possible for forest wild birds to flows in and provides various habitats and feeding areas. And also the subject area is a appropriate area for wild birds research and is like a natural forest in that a layer structure development of the forest itself, a distribution of Zelkova serrata and Aphananthe aspera and so on. 105 species which is observed in subject area are categorized and mountain birds are classified. After time-based peak value is selected in each season, hourly species richness, diversity, and index of similarity are analyzed as compared with the appearing number of species and individual bird. As a result, 7~11 hour is the most effective time in spring, and 8~9 hour is the best time. In summer, 6~9 hour is the most appropriate time when whole appearing species are similar to species structure. In fall, 7~11(30~60 minutes after sun rise) when wild birds movements are vigorous is analyzed easy to observe and 8~9 hour is the most appropriate research time because each analysis shows the best values. In winter, 7~12 hour is the most effective time although 10~11 hour is the best time but it is decided that similar results are drawn because hourly deviation is not so big except 1 hour before sun rise. In every four season, it is decided that 30~60 minutes after sun rise is appropriate to research a group of wild birds in the subject area.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.19-29
• /
• 2016

The purpose of this study is to analyze the combustion and thermal properties in order to establish baseline data for the fire safety evaluation of imported wood. The combustion properties such as heat release rate, total heat release, gas yield, and mass loss were analyzed by the method of cone calorimeter test according to KS F ISO 5660-1 and thermogravimetric analysis (TGA). Analyzed species are five kinds of species as Merbau, Mempening, Garo Garo, Malas, and Dillenia. The heat released rate values showed the highest value of Malas as $375.52kW/m^2$, and Dillenia showed the lowest value as $133.30kW/m^2$. The data values were confirmed in the following order: Malas > Mempening > Garo Garo > Merbau > Dillenia. In case of the total heat release, it was measured in the following order: Mempening > Malas > Garo Garo > Merbau > Dillenia. The gas analysis results were that Dillenia showed the highest value of 0.034. Also, Mempening and Malas showed the lowest at 0.020 in the $CO/CO_2$. Min of mass reduction was shown as 74.79% Sargent cherry, on the other hand, Malas had a 83.52%. It showed a correlation between and of the CO and $CO_2$ generation and combustion characteristics of wood. The thermal decomposition temperature of the wood in the TGA were as follow that Merbau $348.07^{\circ}C$, Mempening $367.57^{\circ}C$, Garo Garo $350.59^{\circ}C$, Malas $352.41^{\circ}C$, Dillenia $364.33^{\circ}C$. The aim of this study is to determine the combustion properties of imported wood according to ISO 5660-1. And, based on the results of this study, we would proceed with further research for improving the fire safety of wood for construction.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.10-19
• /
• 2000

Due to the urbanization, concentrated population, and limited land exploitation in the modern society, the environment surrounding that we live in is getting polluted more and more, and it has become hard even to let urban children experience the nature. This research was conducted to help people recognize the importance of our natural resources through the environmental education of elementary school and to use school's practical open-space for the Indigenous Plants education. The results of this study are as follows : First, the status of a plant utilization in our institutional education : There were 362 species totally of 124 species of Trees, 156 species of Herbs, 63 species of Crops, and 19 species of Hydrophytes which appear in the elementary school text book. Of all, the most frequently appearing species of tree were the Malus pumila var. dulcissima, Pinus densijlora, Citrus unshiu, Diospyros kaki. Second, the effect of plant education using the land around schools : The result of research on the open-space of the 19 elementary schools located in Mapo-gu showed that most of the species planted are the Juniperus chinensisrose, Hibiscus syriacus. Pelargonium inquinans in the order of size, and the plants appearing in text book were grown in the botanical garden organized in 7 schools. Especially most of the Indigenous Plants were being planted in botanical garden, and Pinus densijlora, Abeliophyllum distichum, Polygonatum var. plurijlorum, Liriope platyphylla and so on. Last, the result of this research on recognition of Environment, Planting education and Indigenous plants : It showed that educational necessity of students and teachers about environment and Indigenous Plants was more than 80%. The management of botanical garden was conducted by some teachers and managers. The results of this study suggested that we needed the reconstruction of curriculum, the efficient application of plant education for effectiveness of using school environment and monitoring continually and construction information sources for the better environment education in the elementary schools.

• Horticultural Science & Technology
• /
• v.31 no.3
• /
• pp.259-268
• /
• 2013

This study was carried out to evaluate the visual turfgrass's color quality, winter color, and spring green-up under three different soil systems and to make a practical use for sports turf design and construction. Several turfgrasses were evaluated in multi-layer, USGA and mono-layer systems. Turfgrass entries in the study comprised of 3 cultivars from Korean lawngrass (Zoysia japonica Steud.) of typical warm-season grass (WSG) and 3 blends and 3 mixtures from Kentucky bluegrass (KB, Poa pratensis L.), perennial ryegrass (PR, Lolium perenne L.), and tall fescue (TF, Festuca arundinacea Schreb.) of cool-season grass (CSG). Significant differences were observed in the turfgrass's color quality, winter color, and spring green-up in the study. Seasonal variation of visual turf color greatly occurred according to soil systems and turfgrasses. Multi-layer and USGA systems were highly associated with better visual color ratings, as compared with mono-layer system. Regardless of soil system, visual turf color in all entries was better from spring to fall than in winter. Great color differences were observed during a period of early December to early spring. CSG produced a better color quality over WSG in any soil system. Overall color ratings for CSG were KB > PR > Mixtures > TF. As for a winter color, its ranking was USGA > multi-layer > mono-layer system. No difference was found in winter among cultivars of Korean lawngrass, being completely brown, but great differences among CSG. Rated best for winter color was PR, followed by CSG mixtures, KB and finally TF in order. It was generally conceded that fast green-up in spring was greatly related with multi-layer over mono-layer system and also CSG over WSG. Among CSG, TF had a fastest green-up. PR was also fast in green-up, but poor in color uniformity. KB, however, was the slowest due to shallow rooting system, when compared with other CSGs. These results demonstrate color differences were greatly variable according to soil systems and also among turfgrass species. A precise decision should be made in selecting turfgrass species and soil system. Multi-layer and USGA systems were considered as the suitable one for turfgrass color quality, winter color and spring green-up. It is a great necessity to combine proper soil system, right turfgrass species, and appropriate mixing rates by a concept-oriented approach, when establishing garden, parks, soccer field, and golf courses and so on.

• Journal of Animal Science and Technology
• /
• v.51 no.3
• /
• pp.185-192
• /
• 2009

Fatty acid synthase (FASN) is a multi-functional enzyme with a central role in the synthesis of long-chain fatty acid and has been considered as a positional candidate gene for BTA 19 quantitative trait loci (QTL) affecting milk-fat content and fatty acid composition. In this study, we sequenced the FASN gene in several cattle breeds including Hanwoo and imported beef cattle, and identified novel DNA polymorphisms and their linkage relationship in Hanwoo. We found a significant frequency difference of the FASN (AF285607) g.17924 A$\rightarrow$G polymorphism between Hanwoo (70%) and other breeds and this polymorphism has been known for an association with fatty acid composition in Angus. Furthermore, by direct DNA sequencing in 18 unrelated Hanwoo, we identified 27 SNPs including nine novel variations in the FASN gene. Among 27 SNPs identified in the FASN gene, four SNPs were further genotyped in 100 Hanwoo and 96 imported beef cattle, and analyzed for haplotype construction and association with beef quality traits. We performed haplotype block and linkage disequilibrium studies using four selected SNPs. Two different haplotype blocks (block A: g.10568 C$\rightarrow$T and g.11280 G$\rightarrow$ A; block B: g.13125 C$\rightarrow$T and g.17924 G$\rightarrow$A) were constructed and the block A in particular had a very high r2 (0.936), which indicated a nearly complete linkage disequilibrium existed between the g.10568 C$\rightarrow$T and g.11280 G$\rightarrow$A polymorphisms. A total of four major haplotypes (frequency > 0.05) were identified with the four polymorphisms including TATG (0.36), CGCG (0.31), CGTA (0.19) and TACG (0.06). Statistical association analysis revealed that the g.10568 C$\rightarrow$T and g.11280 G$\rightarrow$A polymorphisms in the FASN were significantly associated with meat color (P=0.004) and texture (P=0.0114). The g.13125 C$\rightarrow$T and g.17924 G$\rightarrow$A polymorphisms in the FASN were also significantly associated with back-fat thickness and quantity index (P=0.0179 and 0.0495, respectively). Our findings suggested that the FASN gene polymorphisms may be used for determining the (unsaturated) fatty acid contents and carcass trait in the Hanwoo beef.