• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.116-122
• /
• 2016

With the changes of industrial structure, contents and types in hazardous and dangerous works have been changed considerably. However, the hazardous and dangerous works by defined "Regulation for the hazardous and dangerous work employment restriction" and "Special education for safety and health"have not been amended over twenty years. This study aimed to identify the recent trends of the works by analyzing the death accidents cases from 2004 to 2013 and to present the management methods about future hazardous and dangerous works. The results showed that amount of 1,972 cases among 11,513 death accidents were equivalent to the works presented by "Regulation for the hazardous and dangerous work employment restriction". The amount of death accidents in 'Work of using construction equipment following construction machinery management act' was biggest among the death accidents cases and that of 'Work of handling pressure vessels following high-pressure gas safety control act' didn't show up. For the works in "Special education for safety and health"amount of 1,650 death accidents cases were equivalent. The amount of death accidents in 'Work involving a crane with a capacity of 1 ton or more or work which is carried out with a crane or hoist with a capacity of less than 1 ton in a workplace having at least 5 such machines' presented by "Special education for safety and health"was biggest. Also, death accidents case didn't occurred in three works presented by "Special education for safety and health". It was analyzed that works with low death accidents cases should be needed to study thoroughly the whole disaster research involving nonfatal accidents. Through this study, it was expected that regulation can be operated practically in the industrial field. Also, it is considered to increase

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.19-26
• /
• 2024

In this study, we analyzed the status of safety management in industrial sites and fatal accident statistics to identify problems and suggest directions for increasing the utilization of convergence engineering. Current industrial site safety management is passive, formal, and unsystematic, and at the same time, the delivery of information on site safety management is very insufficient. In addition, domestic occupational safety and health education was not systematic and could not be considered effective as it was repeating past education forms. Recently, ICT technology has been introduced throughout the industry, and this study suggests several directions for the introduction of convergence safety engineering. Keke is the organization and operation of school curriculum in a convergent manner. In addition, we proposed a plan to apply VR content and experiential education so that safety management education can be conducted in a practical and realistic manner. Lastly, it was proposed to provide differentiated education by industry and type of work, taking into account the characteristics of various industrial sites. It is expected that the results of this study will be able to emphasize the need for convergence and integrated safety education for those involved in the field of domestic industrial safety management and education.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.105-121
• /
• 2011

Objectives: This paper presents the framework and protocol design for a construction industry risk management toolbox. The construction industry needs a comprehensive, systematic approach to assess and control occupational risks. These risks span several professional health and safety disciplines, emphasized by multiple international occupational research agenda projects including: falls, electrocution, noise, silica, welding fumes, and musculoskeletal disorders. Yet, the International Social Security Association says, "whereas progress has been made in safety and health, the construction industry is still a high risk sector." Methods: Small- and medium-sized enterprises (SMEs) employ about 80% of the world's construction workers. In recent years a strategy for qualitative occupational risk management, known as Control Banding (CB) has gained international attention as a simplified approach for reducing work-related risks. CB groups hazards into stratified risk 'bands', identifying commensurate controls to reduce the level of risk and promote worker health and safety. We review these qualitative solutions-based approaches and identify strengths and weaknesses toward designing a simplified CB 'toolbox' approach for use by SMEs in construction trades. Results: This toolbox design proposal includes international input on multidisciplinary approaches for performing a qualitative risk assessment determining a risk 'band' for a given project. Risk bands are used to identify the appropriate level of training to oversee construction work, leading to commensurate and appropriate control methods to perform the work safely. Conclusion: The Construction Toolbox presents a review-generated format to harness multiple solutions-based national programs and publications for controlling construction-related risks with simplified approaches across the occupational safety, health and hygiene professions.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.4
• /
• pp.395-401
• /
• 2018

The Central African Region is known as one of the most troubled and unsafe regions in Africa. But more recently the Central African Region has been growing and developing, with many projects underway involving huge local and foreign construction companies. Despite this fact, workers in the Central African Region often encounter unsafe working conditions and must confront many kinds of hazards. Therefore, the aim of this study is to identify the safety management situation in Central African construction sites, by focusing on the countries of Rwanda and DR Congo. Through our research, it was found that the two countries studied in the Central African Region are very similar with regard to their safety management systems, with some exceptions. In addition, it was revealed that both these countries in the Central African Region had good safety performance. This study will help to illuminate the situation of safety systems on construction sites in the Central African Region, and can be used by companies advancing into the Central African Region's construction market.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.133-143
• /
• 2014

The purpose of this article is to search stakeholders' recognition related to Fire Construction Surveillance system; a client(order), fire fighting officer, supervision company, construction company, design company, other. The paper provides 4 important things. Firstly, a client(order) suggested the lowest recognition in the needs about the need of separation order, that of contract for any construction work limited registered companies, and that of standard price for engineering.. Secondly, the design company is lowest recognition in guidance and control participating in construction-design phase. Thirdly, the design company is lowest in adjustment about manpower-allocation according to allocation criteria of technical manpower. Fourthly, a client(order) and supervision company are relatively lower than other stakeholder in necessity on special education and training system for auditor in fire protection construction. Almost all related matters are related to more or less stakeholders' interest.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.37-46
• /
• 2021

According to the Korean Statistical Information Service, the number of fatal occupational accidents per 100,000 workers is the highest in Korea, among all the OECD countries. The safety of construction workers is managed by the construction technology promotion act (CTPA) and the occupational safety and health act (OHSA). A review of the current safety management laws is required to improve them for the construction industry, where the numbers of accidents and deaths are constantly increasing. Accordingly, the aim of this study was to identify the problems in unclear business areas through comparison and analysis of the CTPA and OHSA guidelines and establish effective site-dependent construction safety management plans. The overlapping safety and health management terms and tasks of organizations were derived along with identifying the overlapping items of the safety management and hazard and risk prevention plans. Based on these results, several improvements for the design stage, safety cost, and safety education have been suggested in this paper. In addition, an improved model based on the integration and an optimized compromise between these two laws for safety management in areas where many accidents have occurred in recent years has been reported here.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.55-62
• /
• 2014

During five years (Year 2009~2013), Total victims of 72 %(81,560 people) and those 50.6 %(1,258 people) of death accident occurs in small scale construction site which operate 2 million USD less construction budget. Especially, falling death accident account for 785 people, in the share of 33.2 %(261 people) death disaster takes due to defect of original cause materials. The major safety issues in small scale work place take place while scaffold installation, disassembling, work-plate improper installation or non-professional skills of workers. Furthermore, labor subcontract systems make small construction site shortage of resources. Those workers regard work-plate as unnecessary and consumables supplies. Because of that most of workers use unsafe workplace in most construction site. Therefore, in order to prevent falling accident occurring in small scale work site, government should organize related regulations such as "Work site safety construction method" and then expands education support, financial aid, and sourcing safety supplies for work plate which offer broad variety experiences. Also, introduce certificate solutions for various work plates to improve safety function such as anchoring type method and anti sliding function.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.69
• /
• pp.87-92
• /
• 2001

A significant number of all reported accidents in Korea involved education and training Based on the Labor Ministry data, statistics, show the education cause was directly involved in 38% of major accidents, Since safety managers have in charge of safety education at the factory, occupational safety curriculum must be studied to train safety manager effectively. In this study an analysis on relative importance of industrial safety curriculum for a good safety manager was performed by Analytic Hierarchy Process(AHP) The results showed that relative importance of industrial safety curriculum by AHP was safety management(w=0.240) ergonomics and system safety(w=0.201) construction safety(w=0.182) mechanic safety(w=0.139) electronic safety(w=0.134) and chemical safety(w=0.104) in order. The results could be used for industrial safety curriculum planning in university and safety organization such as Korea Occupational safety and Health Agency.

• Journal of the Korean Society of Safety
• /
• v.35 no.1
• /
• pp.45-52
• /
• 2020

Construction industry has a relatively higher industrial accident rate than other domestic industries. Thus, to reduce the accident rate, researches on the methodology of worker's safety education combined with new technologies like IT technology have increased. In the light of workers' safety information provision, this study develops a VR(Virtual Reality)-based construction site using the BIM(Building Information Modeling) data. The target structures and geographical features are included in the VR-based construction site where the construction machinery model and worker model are also created using a game engine. For highly effective provision of safety information, video clips with suitable captions corresponding to working processes were made with proper screen directing. They should be appropriately connected to correct worker's operations to improve the work commitment level, sense of reality and inducement of interest. From this scenario, the 3D VR-based construction site, which can be experienced through a VR equipment, was created and in the same platform, the safety information was provided by the video clip combined with the suitable captions. Although the real construction site involves various requirements depending on field situation and the expertness and experience of workers are not consistent, the developed safety information provision based on the VR construction site is expected to effectively reduce the incomplete factors leading to construction accidents by improving the worker's perception of workplace safety.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.11-21
• /
• 2018

Safety accidents, which are called industrial accidents in construction work, are often caused by unstable physical and personal conditions combined during preparation and execution of work. It is difficult to manage all the construction works, but especially in the field of apartment construction work, complex and many kinds of works are being carried out at the same time. In the current construction, safety regulations such as safety management guidelines are generally well maintained, but the execution of manpower resources that can fulfill them is limited, and it is difficult to reduce the accident rate and loss cost. Therefore, in this study, it is a reality that most of the types of construction work are under contruction by subcontracting contract, so they are limit by methods of manual maintenance and safety education. Currently, the subcontractor is also allowed to perform safety management through the composition of the safety management review body, but it is operated formally. So alternatives to this were studied. As a result, safety accidents occur in the subcontractor's worker due to vertical integration, which is characteristic of the construction industry, together to the contractor, the safety management system is based on a safety construction system in which a worker who has a certain qualification condition such as career experience of the work type, work understanding of the work type, and management experience of the work type among the subcontractor, when we manage based on mutual personality which is the personality of interpersonal relationship that can communicate with each other by work type, process and grouping, it is concluded that effective and practical safety management can be achieved to reduce the accident rate and loss cost.