• Journal of the Korea Concrete Institute
• /
• v.17 no.3 s.87
• /
• pp.329-334
• /
• 2005

The use of Polymer Concrete (PC) is growing very rapidly in many structural and construction applications such as box culverts, hazardous waste containers, trench lines, floor drains and the repair and overlay of damaged cement concrete surfaces in pavements, bridges, etc. However, PC has a defect economically because resin which be used for binder is expensive. Therefore the latest research is being progressed to replace existing resin with new resin which can reduce the high cost. Here, Polymer concrete using the recycled PET(polyethylene terephthalate) has some merits such as decrease of environmental destruction, decrease of environmental pollution and development of new construction materials. The variables of this study are amount of resin, curing condition and maximum size of coarse aggregate to find out mechanic properties of this. Stress-strain curve was obtained using MTS equipment by strain control. The results indicated that modulus of elasticity was increased gradually in an ascending branch of curve, as an increase of resin content. Compressive strength was the highest for resin content of $13\%$. And Compressive strength was increased as maximum size of coarse aggregate increases. The strain at maximum stress increases with an increase of resin content and size of coarse aggregate. For the descending branch of stress-strain curve the brittle fracture was decreased when it was cured at the room temperature compared to high temperature.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1099-1104
• /
• 2007

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, national development plan, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system using contour lines, which embodies national geographic information based on the 2-D digital maps and facility information has limitation in implementation in reproducing the 3-D spatial city. Moreover, this method often neglects the altitude of the rail way infrastructure which has narrow width and long length. There it is needed to apply laser measurement technique in the spatial target object to obtain accuracy. Currently, the LiDAR data which combines the laser measurement skill and GPS has been introduced to obtain high resolution accuracy in the altitude measurement. In this paper, we first investigate the LiDAR based researches in advanced foreign countries, then we propose data a generation scheme and an algorithm for the optimal manage and synthesis of railway facility system in our 3-D spatial terrain information. For this object, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional railway model with long distance for 3D tract model generation.

• Journal of the Korean earth science society
• /
• v.22 no.1
• /
• pp.30-39
• /
• 2001

To consider the distribution of the surface sediments and sedimentary processes in tidal flat after the construction of sea-walls in the semiclosed Muan Bay, the southwest coast of Korea, studies on the sediments and sedimentation rates along two transect lines from February 1999 to March 2000 were carried out. The surface sediments in the bay are classified into 5 facies on the basis of textural parameters. The gravelly sediments including the cobbles and pebbles deposited in the bay-mouth are relic sediments which are formed in nearshore and fluvial environments at the low stand of sea level. In addition, it is considered that the muddy sediments widely distributed on the tidal flat might be originated from suspended matter transported from several rivers and/or offshore. Although the sedimentation rates on the tidal flat vary with season, their estimation rates are -8.9 mm/yr on Line-GR and -48.9 mm/yr on Line-YH, respectively. The erosion-dominated processes in the tidal flat would be caused by strengthened ebb tides due to the decrease of tidal choking at Mokpogu and the migration of tidal currents at the bay-mouth. The hydrodynamical changes mentioned above are interpreted to be occurred after/before the construction of sea-dike/sea-walls in coastal zone of Mokpo.

• The Journal of Art Theory & Practice
• /
• no.14
• /
• pp.7-32
• /
• 2012

The exhibition was started in 2010 in the New Acropolis Museum of Athens and embarked a journey since 2011 as a travelling exhibition inside Greece and abroad. The main purpose of the exhibition was to draw attention of the general public to the value of the 'rescue excavation' and of cultural heritage of Greece, by presenting the reconstruction bust of a girl whose skull was found in Kerameikos cemetery of ancient Athens. The new Kerameikos excavation was initiated by the construction of Metropolitan Railway lines in the center of Athens between 1992 to 1998. It revealed a pit of a mass burial where about 150 people were inhumed in a very hasty way without proper funeral rites or offerings. These bodies are identified as the victims of the infamous plague of Athens in the first years of the Peloponnesian War(430-426 BC). The epidemic disease killed almost one third of the city population including Pericles, and brought extreme fear and panic to the Athens society. The traditional funerary rites were totally disrupted, and the social decorum and the morality among the citizens became enfeebled. The plague and the civil war were the decisive factors to end the Golden Age of Democratic Athens. However, the exhibition organizers did not focus on the tragic aspect of this disaster and its casualties. Their main concern was to simplify the scholarly works of archaeological excavation and microchemistry analysis so that the exhibition viewers will easily understand and empathize the living value of the scholarly works of ancient Greek civilization. The centripetal element of the exhibition was the vivid face of an 11 years old ancient girl 'Myrtis', which was carefully reconstructed based on both the scientific data and artistic imagination. Also the set up of the exhibition was structured in order to stimuli cognitive and emotional experience of the visitors who witnessed the rebirth of a vibrant human being from an ancient debris. The museologists' continuous efforts to promote projects of contemporary artists, publications, and school programs related to the exhibition indicate that the ulterior motive of this exhibition is the cultural education of the present and future generation through the intimate experiences of ancient Greek life. Also this is the reason why the various museums that held the travelling exhibition try to make the presentation as a gesture of memorial service for an anonymous Athenian girl who deceased circa 2400 years ago. The pragmatic efforts of Greek scholars and museologists through exhibition show us a way to find a solution to the continuous threat of cultural resources by massive construction projects and land development, and to overcome public indifference to the history and cultural heritage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.614-627
• /
• 2018

Urban railway lines have been constructed adjacent to residential buildings and urban areas. The expansion of transportation networks and reconstruction of residential buildings in highly populated urban areas require deep excavations in areas adjacent to urban railways. Mobilized soil stresses and changes in the groundwater level induced by deep excavations results in track irregularities in urban railways. In this study, a three-dimensional finite difference model using the commercial program FLAC3D was adopted to estimate the horizontal displacements of earth retaining structures, settlements of backfill, the stability of track irregularity and underground box structure based on the criteria of each railway organization and its relationships. In deep excavations, a change in groundwater level induces relatively very small differences for track gauge irregularities, whereas relatively large differences for longitudinal irregularities of 72.5%, twist irregularities of 83.3%, cross level irregularities of 61.9%, and alignments of 43.3% were found to be the maximum differences when the horizontal displacement of earth retaining wall and settlement of backfill were 65.1% and 21.4%, respectively, because the groundwater level (GWL) on the ground surface-mobilized tensile strength of the underground box structure exceeds the allowable value. Therefore, three-dimensional numerical analysis was performed in this study. Overall, real-time monitoring should be carried out to prevent railway accidents in advance when a deep excavation adjacent to urban railway structures is constructed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.345-353
• /
• 2020

On conventional railway lines, trains with different speeds are operated. Therefore, trains moving on curved sections with cants must accept various ranges of balanced cants, cant deficiency, and cant excess, which is essential for the comfort and safety of train operation. In this study, the correlation between the curve radius, cant, and train speed on a track was analyzed to check the cant range that satisfies the criteria of train types, operation speed, cant deficiency, and cant excess. Also, the range of setting the cant by the curve radius and balanced cant were calculated by a regression analysis of train speed according to the frequency of operation in the case of mixed trains. The results could make it possible to improve the speed of the operation route, reduce the loss of ride quality, reduce the risk of derailing caused by cant deficiency, and minimize the load deflection by excess cant. This will ensure the safety of trains running on curves and improve the efficiency of track maintenance.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.1
• /
• pp.45-53
• /
• 2009

More than 40% of railway bridges on the conventional lines in Korea consist of track-on-steel plate girder (TOSPG) bridges. This type of bridge is typically designed without considering seismic loadings, as most of them were built before 1970. The seismic performance of this particular type of bridge could be upgraded through various seismic retrofit schemes, and seismic risk assessment could play a key role in decision-making on the level of the seismic retrofit. This study performed a seismic risk assessment of TOSPG bridges in Korea. The seismic damage of several crucial components of TOSPG bridges--fixed bearings, free bearings, and piers--were probabilistically estimated, and their seismic fragility curves were developed. The probability that the components would exceed their predefined limit states was also calculated by combining the fragility curves and the seismic hazard function. The analysis showed that the piers of TOSPG bridges, which are made of plain concrete without rebars, have relatively low risk against seismic loadings in Korea. This is because the mass of the superstructures of TOSPG bridges is relatively small, and hence, the seismic loading being transferred to the piers is minimal. The line-type bearings typically used for TOSPG bridges, however, are exposed to a degree of seismic risk. Among the bearings, the probability of the free-end bearings and the fixed-end bearings exceeding the slight damage state in 50 years was found to be 12.78% and 4.23%, respectively. The gap between these probability values lessened towards more serious damage states. This study could effectively provide an engineering background for decision-making activities on the seismic retrofit of railway bridges.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.345-354
• /
• 2007

A sedimentation analysis has been attempted to figure out sedimentation environment due to construction of coastal jetties, such as fish harbor dike, flow guided dike and jetty in shallow Kusipo area, in which tidal range marks up to 6.6 meters in spring tide. As an initial approach of understanding field measurement were done on several stations along reference lines with total station and photo analysis taken by remote controlled small air craft far one and half years. Also numerical tests were done by 2-D ADCIRC model considering dry-wet treatment to evaluate flow and bottom shear stress variations. According to direct measurement, deposition seems to be dominant on Kusipo beach. Model results show bottom shear stress lessens to $0.10{\sim}0.15\;N/m^2$ on most shadow zone of jetties and the inner zone is suffering sedimentation as a result of dike construction. However this is the first approach with limited analysis, thus it should be dealt further considering physical characteristics of bottom sediments in a complete sediment model on upcoming study.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2008

Recently needs for the convergence of CAD and GIS data are increasing, and many studies on converting two systems to each other are being carried out. In this study, to revise and update the building data of digital map using CAD data for construction, the outline of building is abstracted from the CAD data and the outline is generalized to the same level of detail with the building data of digital map. Several line simplification algorithms to generalize the outline are adopted and compared, especially at the view of satisfaction to the drawing rule for digital map. Douglas-Peucker algorithm, Lang's algorithm, Reumann-Witkam algorithm, and Opheim algorithm are applied as the line simplification method. To evaluate the results of these algorithms, visual assessment and variation ratio of the number of points, total length of lines, the area of polygon, and satisfaction ratio to the drawing rule of digital map are analyzed. The result of Lang algorithm and Douglas-Peucker algorithm show superior satisfaction ratio. But general satisfaction ratio is 50~60% for all algorithm. Therefore there seems to be a limit to use these algorithms for the simplification method to update the building data in digital map and it is necessary to develop line simplification algorithm which satisfy the drawing rule well.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.30-41
• /
• 1998

This study analyzed urban greenspace area and vegetation structure by land use types for Kangnam-gu and Junglang-gu in Seoul different in income and building construction date. The study districts had a similar areal distribution of land use types. Residential lands accounted for about 32~37% of total area, natural lands, 19~22%, commercial and industrial lands(including transportation), 13~18%, and institutional lands, 13~17%. Greenspace covered only 20~30% of urban residential and commercial area in which human activities of living concentrate. Canopy stocking level in urban lands (all land uses except natural and agrecultural lands) was about 39% for Kangnam-gu and 50% for Junglang-gu, showing tree planting potential slightly higher in Kangnam-gu than in Junglang-gu. Woody plant cover was approximately 13%, and tree density was 3 trees/100m$^{2}$ forurban lands in both districts. The tree-age structure was largely characterized by young, growing tree population, and species diversity within a diameter class decreases as the diameter classes get larger. Urban lands of both districts had quite a similar species composition of woody plants (similarity indez of 0.70). Income and bulding construction date did not result in significant diference between the two districts in vegetation structure for urban lands. Some strategies were ezplored to solve problems found in the present greenspace structures. They included increase of biomass and greenspace area through minimization of unnecessary impervious surfaces, creation of multilayered and multiaged vegetation structures, and avoidance of intensive tree pruning and relocation of above ground utility lines.