• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.43-48
• /
• 2008

본 논문은 유닛 모듈러를 구성하는 주구조체인 각형강관 기둥과 냉간성형 LEB C-형강 보가 볼트 접합된 접합부를 가진 모듈러 건물의 접합부 구조성능 및 시공성을 평가하는 것이 연구의 목적이다. 모듈러 건축의 장점은 공사기간 단축, 경량성, 이동가능성 등으로 볼 수 있다. 반면에 유닛 또는 모듈의 운송비용이 공사비 절감 비용을 반감시킬 수 있고 많은 공장들이 외부 지역에 있으므로 이들을 도심지나 원하는 지역으로 이동하기 위해서는 비용이 추가된다. 그리고 유닛이나 모듈 설치에 크레인 등의 장비 사용으로 인해 시공비용이 증가될 수 있는 단점들이 존재한다. 본 연구에서는 해체조립이 용이한 볼트접합부 구조성능 및 모듈러 건축물의 시공사례를 통하여 공기, 비용 등 측면에서 기존 연구와 비교분석을 진행하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.466-469
• /
• 2006

This paper presents the structural characteristics of slab-column connections by using nonlinear finite element analysis. FEA considering material non-linearity was performed to investigate average column strain, failure mode, principal stress distribution, and steel yielding conditions for various slab-column members. In addition, to investigate alternative methods for improving the strength of interior column-slab joints, some specimens were provided with different reinforcing types of high-strength concrete puddling, high-strength column longitudinal steels, dowel bars, and high-strength concrete core. To make certain of the reliability of the analytical program, analysis results for concrete material model developed and two specimens with and without puddling were compared with experimental results. It was found that providing the alternative reinforcing methods in the slab-column joint results in a significant improvement in performance. This includes an increase in the axial compressive strength, greater loading stiffness, and ductility.

• 한국공간구조학회논문집
• /
• 제8권4호
• /
• pp.65-71
• /
• 2008

본 논문은 유닛 모듈러를 구성하는 주구조체인 각형강관 기둥과 냉간성형 LEB C-형강 보가 볼트 접합된 접합부를 가진 모듈러 건물의 시공성을 평가하는 것이 연구의 목적이다. 모듈러 건축의 장점은 공사기간 단축, 경량성, 이동가능성 등으로 볼 수 있다. 반면에 유닛 또는 모듈의 운송비용이 공사비 절감 비용을 반감시킬 수 있고 많은 공장들이 외부 지역에 있으므로 이들을 도심지나 원하는 지역으로 이동하기 위해서는 비용이 추가된다. 그리고 유닛이나 모듈 설치에 크레인 등의 장비 사용으로 인해 시공비용이 증가될 수 있는 단점들이 존재한다. 본 연구에서는 앞서 연구한 모듈형상에 근거하여 해체조립이 용이한 모듈러 건축물의 시공사례를 통하여 공기, 비용 등 측면에서 기존 연구와 비교분석을 진행하여 모듈러 건물의 시공성을 평가하고자 한다.

• Smart Structures and Systems
• /
• 제26권1호
• /
• pp.11-21
• /
• 2020

The hinge joint is the key to the overall cooperative working performance of the assembled beam bridge, and it is also the weakest part during the service period. This paper proposes a method for monitoring and evaluating the lateral cooperative working performance of fabricated beam bridges based on dynamic strain correlation coefficient indicator. This method is suitable for monitoring and evaluation of hinge joints status between prefabricated girders and overall cooperative working performance of bridge, without interruption of traffic and easy implementation. The remote cloud monitoring and diagnosis system was designed and implemented on a real assembled beam bridge. The algorithms of data preprocessing, online indicator extraction and status diagnosis were given, and the corresponding software platform and scientific computing environment for cloud operation were developed. Through the analysis of real bridge monitoring data, the effectiveness and accuracy of the method are proved and it can be used in the health monitoring system of such bridges.

• 한국강구조학회 논문집
• /
• 제13권6호
• /
• pp.621-629
• /
• 2001

본 연구에서는 국내에 적용된 종리브 현장연결부의 구조상세를 검토하고 실험체를 제작하여 정적재하실험 및 피로실험을 실시하였다. 정적 및 영향면 재하실험을 통하여 강상판 현장연결부의 응력분포양상을 분석하여 핸드홀 덮개판의 유무와 편심하중의 영향을 살펴보았다. 극한강도 실험을 통해서는 종리브 현장연결부의 극한내력을 평가하였다. 피로실험을 수행한 결과, 낮은 응력수준에서는 스캘럽부에서 피로균열이 발생하였고, 높은 응력수준에서는 핸드홀 덮개판의 파괴 후에 종리브의 갑작스런 파괴가 일어났다. 본 연구를 통하여 현장연결부의 거동특성의 이해를 위한 기초적 연구를 수행하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.22-23
• /
• 2016

This study aims to derive the optimal condition that ensures the monolithicity of ultra-high performance concrete (UHPC), through the evaluation of bonding shear performance with respect to the time of cold joint occurrence during the placement. From the direct shear test, while the normalized bonding shear strength reduction of UHPC with the delay time of 15 minutes was the lowest at around 8%, a dramatic degradation of bonding shear performance was observed after 15 minutes. XRD analysis of the middle and surface sections was performed in order to analyze the composition of the thin film formed at the surface of UHPC, and as a result, the main ingredient appeared to be SiO₂ from the XRD pattern of middle and surface sections, which is believed to be the result of the rising of SiO₂-based filler, used as anadmixture in this study, toward the surface, due to its low specific gravity.

• Steel and Composite Structures
• /
• 제1권1호
• /
• pp.1-16
• /
• 2001

Due to aesthetic, economic, and structural performance, the use of structural hollow sections as columns in both continuous moment resisting and nominally pinned construction is attractive. Connecting the beams to these sections is somewhat problematic as there is no access to the interior of the section to allow for the tightening of a standard bolt. Therefore, bolts that may be tightened from one side, i.e., blind bolts, have been developed to facilitate the use of site bolting for this arrangement. This paper critically reviews available information concerning blind bolting technology, especially the performance of fasteners in shear, tension, and moment resisting connections. Also provided is an explanation of the way in which the results have been incorporated into design guidance covering the particular case of nominally pinned connections. For moment resisting connections, it is concluded that whilst the principle has been adequately demonstrated, sufficient data are currently not available to permit the provision of authoritative design guidance. In addition, inherent flexibilities in the connections mean that performance equivalent to full strength and rigid is unlikely to be achievable: a semicontinuous approach to frame design will therefore be necessary.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.165-166
• /
• 2014

The Composite waterproofing began to rise gradually 2000s in domestic. However, the sheet-membrane composite waterproofing method also acts as an abutment vulnerability that was a problem in a single method, and had the problem of damage to the formation of leakage paths. The existing non-overlap method, through vigorous research abutting sheet shall or could be developed to improve the seal performance of this method with the I-type joint coating material. Nevertheless, it has an integral top coat paint membrane and a sheet abutment limitation, damage to the upper membrane is damaged junction coating membranes has been generated. In this study, a method that has a layer of insulation on the joint bond breaker concept development, and to determine the physical properties with insulated joints to determine the breaking off of the upper joint is damaged coating membrane and tensile performance.

• 한국터널지하공간학회 논문집
• /
• 제3권3호
• /
• pp.45-56
• /
• 2001

터널 시공에 영향을 주는 지질구조에 대한 정확한 정보를 얻기 위해서는 시공 중의 탐사기법이 중요한 역할을 한다. 국내에서 막장 전방 지질조건을 예측하기 위한 터널내 탄성파 반사법 탐사로는 TSP(Tunnel Seismic Prediction)법을 주로 적용했으나, 본고에서는 HSP(Horizontal Seismic Profiling)법을 수행하였다. 현장 적용결과 소규모의 불연속면의 존재가 예측되었으며, 또한 지반 조사에서 추정된 RMR 값과 터널내 반사법 탐사를 통하여 얻은 암반조건과 거의 일치하는 결과를 얻었으며, 시공 중 평가되는 암반 분류 및 평가 결과와 비교 검증하였다.

• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.151-158
• /
• 2019

A concrete core is used widely as lateral stability systems in high-rise modular buildings. As an alternative to traditional cast in-situ core, the precast concrete(PC) method can accelerate the construction of reinforced concrete cores. A core composed of precast elements differs from a in-situ core in having connections between the precast elements. The typical vertical connection between PC panels is consisted of shear keys, loop bars, lacer bars and grout. In this study, the effect of vertical connection components on shear strength is investigated experimentally. The test results show that the contribution to the shear strength is greater in order of grout strength, shear keys, lacer bars and loop bars. In addition, the numerical models to estimate the shear strength according to two crack patterns in the vertical joint of the PC panels are derived. The feasibility of the numerical models is evaluated by comparing the estimated shear strength and the test results.