• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1148-1154
• /
• 2009

This study focus on the suggestion of application manual using assembling reference plane design & standard finish material basis upon material classification code. We see it will function as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plan. For a estabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년 추계학술발표대회 논문집
• /
• pp.448-451
• /
• 2008

This study is under doing to suggest application manual using assembling reference plane design & standard finish material basis upon material classification code as a tool of a linkage between building design and construction standarization in order to enlarge the applicability of house building material that is produced by the module plant. We can say the goal of building standardization intend not only the improvement of construction productibility but also guarantee of subsequent performance through automatization basis upon informationalization of building design. For a etabilishing of this condition, it is neccessary to link the standardization's result of material--design--construction field. According to this neccessity, we are going to suggest information factor that can make relative business manager easily approach to the standardization practical task.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.57-58
• /
• 2014

For durability design to protect against chloride-induced corrosion, it is important to estimate the amount of chlorides on the surface. However, it is difficult to estimate the airborne chlorides, a boundary condition, due to the difference between the amount of chlorides attached to a surface of an actual structure and that in the air. Therefore, in this study the attachment rate analysis of airborne chlorides was evaluated for 13 types of finish materials. As a result, despite differences in the amount of airborne chlorides according to the finishing type, it was found that 60 percent of airborne chlorides were attached to mortar, 30 percent were attached to steel, and 25 percent were attached to tiles compared with the amount of chlorides in the air.

• 한국건축시공학회지
• /
• 제3권1호
• /
• pp.131-138
• /
• 2003

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study is development of new design form and made elaborateness shape. Architecture finish material not used expenses working hours, personnel expenses, architecture finish material cost. After this, building wall apply a variety shape in concrete surface and Easy to used in field.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.109-112
• /
• 2004

Contemporary, architecture calls for a wide range of surface textures and treatments. A surface compatible with the architecture's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose, of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost, through this study, we have figured out the best mix proportion for durability and glossability of glossing exposure concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.27-30
• /
• 2002

Contemporary architecture calls for a wide range of surface textures and treatments. A surface compatible with the architect's design may vary from a glass-smooth finish to one requiring special sculptured ornamentation. These surfaces require many different types of form sheathing and lining. The purpose of study development new design form and made elaborateness shape. Easy to used in field that architecture finish material not used expect effective reduce of working hours, personnel expenses, architecture finish material, cost. After this, building wall apply a variety shape in concrete surface.

• 한국건설관리학회논문집
• /
• 제6권6호
• /
• pp.160-170
• /
• 2005

노출 콘크리트 마감공법은 건축설계자의 입면 개념에 따라 일반 및 제물치장 콘크리트 마감공법과 더불어 다양한 마감품질과 표면형태를 나타내며 최근 적용사례가 꾸준히 증가하고 있는 추세이다. 노출 콘크리트 마감공법은 설계 및 시공수준, 마감면의 품질 및 평활도, 색상 및 질감에 따라 타 콘크리트 마감공법보다 공사비 투입이 증가되고 체계적인 설계 및 시공관리가 요구됨에도 불구하고 노출 콘크리트 마감공법에 대한 정의가 불명확하고 설계, 시공, 유지관리 단계별 관리 방안이 구체적으로 제시되지 않아 원가상승, 시공품질 저하, 시공성 저하 등의 문제가 유발되고 있다. 본 연구에서는 노출 콘크리트 마감공법의 체계적인 관리방안 제시를 위하여 국내의 불명확한 노출 콘크리트 마감공법의 정의를 문헌조사 및 사례조사를 통하여 명확하게 제시하고, 노출 콘크리트 마감공법의 색채균일성, 균열발생 억제, 콘크리트 충전성확보 등 노출콘크리트 마감공법의 요구사항과 결함유형을 분석하였다. 이를 바탕으로 노출 콘크리트 마감공법의 시공프로세스를 타 콘크리트 마감공법과 비교 분석하였으며, 노출 콘크리트 마감공법의 설계단계, 시공계획 및 관리단계, 유지 보수 단계별 관리방안을 제시하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.597-601
• /
• 2006

건설생산 프로세스의 각 단계에서 자재 관련 정보의 신속한 검색 및 활용 체계가 미비하여 각종 자재의 분석 및 선정에 상당한 인력 및 시간이 소요되고, 또한 각 단계별로 작성된 중요 정보들의 재활용 체계도 미비하여 각 단계별 업무 및 현장 종료 시 사장되고 있다. 그 결과 각 단계에서 유사/동일 업무의 반복수행으로 회사차원에서 인적자원의 효율적 운용을 저해하고 회사 경쟁력을 저하시키는 주요인이 되고 있는 실정이다. 또한 개설현장에서 마감자재 선정 시 제품특성과 현장 적용사례 등 깊이 있는 기술정보가 부족하여 자재선정에 많은 애로가 있으며, 시공품질은 물론 현장 손익에 지대한 영향을 주게 됨에 따라 마감자재 관련 현장사례 정보를 실시간으로 공유할 수 있는 지속가능 정보관리 시스템의 필요성이 대두되고 있다. 본 연구는 건설업무의 생산성 향상을 위해 마감자재의 실시간 검색과 활용이 가능한 건축 마감자재정보 관리 시스템을 제시하고자 하는 것이다. 이를 위해서는 현행 자재정보 업무현황을 분석하고, 현장을 대상으로 설문조사를 실시하여 시스템 개발의 요구사항을 파악하고, 그 결과를 충분히 시스템에 반영시켜 실사용자가 쉽게 접근하고 활용할 수 있도록 하였다. 따라서 본 연구에서 제안하는 건설업무의 생산성 고도화를 위한 건축 마감자재 정보시스템은 시공품질 향상, 공사이익 극대화, 그리고 기업 경쟁력 강화에 활용될 수 있을 것으로 기대된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.118-119
• /
• 2019

The exterior finish not only has a relationship to the functionality of building, but also the spatial aesthetics and visual perception. Common exterior finishes are wood, stone or acrylic based and etc. However, these finishes have different attributes which can alter the quality of the architecture, such as durability, moisture and fire resistance. To make up for the short-comings of these materials, we have used iron based resources for optimization. However, iron materials are expensive, so they have limitations in general use. In this study, we have experimented with various forms of exterior finishes using cement, which is the most efficient and widely used building material with several economic advantages. We experimented with different materials to use as the formwork for the gloss of the cement matrix. As a result, the gloss show that order of urethane, steel, and wood material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.27-30
• /
• 2009

This study is to evaluate the basic properties of concrete panels for surface finishing and to introduce the case of its application. As a result, the records of bending, abrasion resistance, impact strength were shown satisfied with KS standard. In a case of its application it was found production process can be simplified through a simplified manufacturing process. And also its cost-effective production and utilization practices are highly expected than imitation stone or native rock.