• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.220-222
• /
• 2002

건설사업을 시행하면서 생성되는 설계도서를 건설CALS/EC 체계에 따라 사업참여주체간에 보다 효과적으로 교환 및 공동 활용하기 위해서는 먼저 설계도서의 전자화가 필요하며 이 때 전자화된 도서는 하드웨어나 소프트웨어에 제약을 받지 않으면서 표준화된 설계도서의 논리 구조가 필요하다. 본 연구에서는 설계도서에 관한 XML DTD(Document Type Definition)을 설계하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.245-248
• /
• 2006

This paper presents the results from a survey on root causes that led to fatal accidents in construction projects In Vietnam. The survey was conducted by means of structured questionnaires and interviews with relevant individuals such as Foremen, field engineers, and project managers working in construction companies located in Ho Chi Minh City, the largest city of Vietnam. The survey sample consists of in total 91 fatal accident cases that occurred in construction projects during the years 1996-2005 and were recorded in a report at the Vietnam Department of Labor-Invalids-Social Affairs. The current effort is aimed at determining the essential measures for avoiding fatal accidents that have been increasingly taking place in Vietnam construction firms. The findings from the survey provided a necessary basis for determination of critical factors to be used as safety indexes in developing a checklist for preventing fatal accidents in future construction project

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.714-719
• /
• 2008

In a domestic construction field, after floor is constructed, protector for construction surface is set up to prevent the surface of the floor being scratched and polluted. However, the problem is that contaminants discharged with the removal of the protector for construction surface exert a bad influence for the indoor air quality. In the research, it tested to the contaminant reduction performance of the adsorption protector for construction surface using powder of charcoal by the alternative proposal of such protectors for construction surface

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.104-105
• /
• 2018

The purpose of the safety management plan under the Construction Technology Promotion Act is to improve the quality and safety of construction engineers during construction work. To prevent a collapse accident of a facility after completion by preventing a collapse accident of gravel, an earthwork, a river structure or the like. In order to prevent collapses, the purpose of the project is to study measures to improve the ability of construction technology promotion law to ensure the quality of construction materials at the time of construction work.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.523-529
• /
• 2011

In a tall building construction with reinforced concrete structures, the selection of an appropriate formwork system is a crucial factor for the success of the project. Thus, selecting an appropriate formwork system affects the entire construction duration and cost, as well as subsequent construction activities. However, in practice, the selection of an appropriate formwork system has depended mainly on the intuitive and subjective opinion of working level employees with restricted experience. Therefore, in this study, a formwork system selection model using the Adaboost algorithm is proposed to support the selection of a formwork system that is suitable for the construction site conditions. To validate the applicability of the proposed model, the selection models Adaboost and ANN were both applied to actual case data of tall building construction in Korea. The Adaboost model showed slightly better accuracy than that of the ANN model. The Adaboost model can assist engineers to determine the appropriate formwork system at the inception of future projects.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.19-21
• /
• 2001

건설사업을 시행하면서 발생하는 법정 서식문서를 사업주체간에 보다 원활하게 교환하기 위해서는 서식 문서의 전자화가 선행되어야 한다. 서식문서를 XML로 전자화 할 때 사업주체가 공통으로 활용할 수 있는 문서의 논리구조 정립이 필요하다. 이를 위해서 1,500여 개의 건설관련 법정 서식문서와 건설CALS/EC 사업에서 개발한 XML 전자문서를 조사.분석하였다. 분석된 결과를 바탕으로 서식문서의 공통 구성체계와 구성요소를 구조화하고 이론 XML 규칙에 따라 24개 대표 엘리먼트로 구성된 공통 DTD를 개발하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.145-147
• /
• 2002

건설CALS/EC 체계에 따라 도로건설공사에서 생성되는 설계문서를 발주자, 설계자 및 시공자 등 참여 주체간에 보다 효과적으로 교환하기 위해서는 특정 하드웨어나 소프트웨어에 구애를 받지 않으면서 표준화된 전자문서 정보체계에 따라 전자화해야 한다. 이를 위해 다양한 유형을 갖는 설계문서에서 반복적이면서 빈번하게 나타나는 공통 구성체계와 정보요소를 대상으로 설계문서 공통 DTD를 개발하였다.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.239-239
• /
• 2004

• The Magazine of the IEIE
• /
• v.40 no.2
• /
• pp.57-63
• /
• 2013

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.331-337
• /
• 2009

This paper summarizes some of approaches that could be taken for data exchange in a non-interoperable work environment and reports lessons learned from the Dongdaemun Design Plaza and Park project. Today's widespread application of building information modeling (BIM) to the construction and architectural design industries requires a change in the cooperation between business organizations and their methods of communication. In particular, the interoperability of information between interdisciplinary organizations, which use specific programs for different purposes, has become a critical issue. More than just a technical problem, it is also highly related to an organization's collaboration culture and the particulars of a specific project. This paper describes the interoperability issue that occurred during the construction documentation phase of the irregularly shaped building project, Dongdaemun Design Plaza and Park, designed by Zaha Hadid Architects and Samoo Architects and Engineers, from the perspective of the technological problem and the collaborative organizations' communications. Although the perfect compatibility of information is not possible, this paper deals with a practical approach to the interoperability issue by examining the way the end-users of computer-aided design (CAD) resolved the interoperability problems in practice.