• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.7-12
• /
• 2008

We constructed Seal type waterproofing with adhesive and swelling properties in the field of construction work as yet. But we have many problems of seal type waterproofing with adhesive and swelling properties for construction. Because it has high viscosity, so wokers are too adhered for the work. So, we developed and applied about the high temperature and spray equipments of piston type better than before. We able to be expect that cost reduction and increase construction ability by high temperature and spray equipments of piston type.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.29-31
• /
• 2002

Purpose of the 765kV trial operation conducted for the first time in our country are performance verification of domestic developed equipment(765kV M.Tr, GIS,etc) and extraction of problem in advance to commercial operation and cultivation of operation ability. The trial operation of 765kV substation was finished successfully under the positive supports of institutes. manufactures. and constructers. It is expected that extraction of problems in advance and accumulation of operation techniques through the trial operation of 765kV substation will be contributed largly to the realization of the without a hitch operation of 765kV system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.33-38
• /
• 2005

It is applied in the high quality equipment construction by introduction of this high duality treating technology (ozone treating, activated carbon treating, high quality oxidation treating, UV treating etc.)waterproofing or corrosion proof method caused secondary economy damage of operation discontinuance and high quality treating equipment for applying existent waterproofing method that corrosion proof ability (ozone resistance performance, chemical resistance etc.) and abrasion resistance performance by comprehension insufficiency of user and designer. Therefor, In this study, we will analyze problem of waterproofing and corrosion material of existing construction application by high quality treating, and measure physical performance change by various condition. It is required to waterproofing and corrosion system and application of the field valuation.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.11-23
• /
• 2005

It is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSIM(Process Safety Information Management) evaluation method in the construction. The reason why PSIM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.754-757
• /
• 2009

The current concrete maturity method implemented with temperature sensors requires an extensive wiring, which is not often acceptable on construction site due to harsh working environment. Radio Frequency Identification (RFID) technology appears to provide a solution for the wiring issue because of its ability of sending data wirelessly. An RFID tag integrated with a temperature sensor and placed within fresh concrete may be able to read temperatures of concrete and transmit them to an RFID reader wirelessly in real-time. However the previous research illustrated that the RFID signal gets dispersed in liquid medium. One may speculate then whether RFID signals travel through fresh concrete with high water content. Would the tag's burying depth within fresh concrete affect its readability? The paper presents the preliminary results of our on-going investigation on the readability of RFID tags in concrete against water content and burying depth of tags.

• 한국지반환경공학회 논문집
• /
• 제17권11호
• /
• pp.45-53
• /
• 2016

패널식 옹벽은 지보재를 통한 선지보 개념으로 프리캐스트 패널과 체결하여 원지반 강도를 최대한 보호하며 보강하는 공법이다. 최근 건설공사에서 대규모 깎기비탈면의 형성에 따른 토공량 증가와 환경 훼손을 최소화하고 용지제한에 따른 토지의 효율적인 이용을 위해 패널식 옹벽의 적용이 증가하고 있는 추세이다. 원지반 부착식 패널옹벽은 자연암반 질감을 갖는 프리캐스트 콘크리트 패널을 사용하여 경관성을 향상시키고 완전한 Top-Down 시공법을 구현하도록 개발된 공법으로 수직절취와 패널의 원지반 직접부착이 가능해 비탈면 이완을 최소화하고 터파기 및 되메우기 공종을 배제하여 시공성을 개선하였다. 본 연구는 현장시험시공을 수행하여 수직절취 및 Top-Down에 대한 시공성을 확인하고, 대형재하시험과 하중단계별 계측결과를 분석하여 원지반 부착식 패널옹벽의 거동특성을 분석하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.388-393
• /
• 2003

최근 국내 CM 활성화를 위한 노력이 이어지고 있음에도 불구하고, CM의 성공적인 정착에 중요한 역할을 하는 발주자에 대한 연구가 충분히 이루어지지 못하고 있다. 이러한 관점에서 본 연구는 국내 공공 건설부문의 CM 방식 도입과 활용에 있어서 가장 중요한 역할을 하는 발주자 조직의 CM 역량 수준을 파악하고 이에 근거한 발전적인 전설사업관리 방식의 전개 방향을 제시하기 위하여 발주자 조직의 CM 역량 진단표를 제시하였다. 제시된 진단표를 바탕으로 설문을 통한 사례 분석을 실시하였으면, 각 발주조직 유형에 따라 상대적으로 중요한 업무와 현재 역량이 부족한 업무, 그리고 그에 대한 대응방안에 차이가 있는 것을 알 수 있었다.

• 한국건축시공학회지
• /
• 제17권4호
• /
• pp.341-348
• /
• 2017

콘크리트 포장도로는 동절기 제설제에 의한 내구성 저하가 심각한 위협으로 거론되고 있고 그 보수에도 많은 비용이 소요되고 있다. 따라서 이러한 콘크리트 포장재에 대한 적절한 보수 대책의 마련과 이에 활용될 우수한 성능의 보수 재료가 요구되고 있는 상황인데, 본 연구에서는 국내에서 개발된 인산마그네슘 세라믹(Magnesium phosphate ceramics)을 대상으로 압축강도 특성 및 염소이온 침투 저항성, 길이변화 특성을 평가하여 국내 콘크리트 포장 도로의 보수 재료로 적용 가능성을 검토하였다. 평가 결과 모르타르의 유동성은 190mm의 평범한 수준을 나타내었으나 다소 점성이 높고 재료 자체의 흐름성은 크지 않았다. 응결 시간은 12분으로 매우 빠른 경화가 이루어졌으며 이에 따라 신속한 작업이 요구되었다. 모르타르의 압축강도 성능은 2시간에 38.4MPa, 24시간에 73.8MPa, 28일에 111.0MPa로 재령 초기부터 높은 수준을 나타내었다. 염소이온 침투 저항성 시험 결과 모르타르의 경우 143 Coulombs, 콘크리트의 경우 173 Coulombs으로 매우 우수한 수준을 나타내었다. 콘크리트의 길이변화 시험 결과는 재령 40일까지 $60{\times}10^{-6}$ 이하로 완만하게 감소하였으며, 보통의 시멘트 콘크리트의 길이변화 수준과 비교할 때 1/10 이하의 수준으로 우수한 체적안정성을 확보하고 있었다. 이상과 같이 인산마그네슘 세라믹은 우수한 강도 성능과 염소이온 침투 저항성, 체적 안정성을 보유하고 있음을 확인하였고, 향후 작업 시간이나 작업성에 대한 개선이 요구되며, 현장 적용시에는 이러한 부분에 대한 주의가 필요하다.

• 한국건축시공학회지
• /
• 제13권2호
• /
• pp.112-121
• /
• 2013

Korean overseas construction has been on the rise, and exceeded the 2011 goal of $50 billion by securing $59.1 billion in orders. However, these orders were heavily concentrated in the Middle East (50%) and plant construction contracts (75%). This study suggests that, to maintain growth in foreign markets, Korea construction companies should enter into the high value-added investment development business and aggressively seek ways to diversify their regions of activity and construction types. To secure the entry of Korean construction companies into lucrative markets and better understand the competitive factors facing Korean construction concerns, a survey of the literature and focus group discussions targeting relevant experts were carried out. From those efforts, a list of 44 competitive factors crucial to entering and competing in the international investment development business was developed. Survey responses were analyzed by applying IPA. The results revealed that while Korean concerns compete well in engineering/technical capabilities, maintaining a cooperative relationship with contractors, and warranty/after sales service capabilities, their ability to obtain business information on the target country, to form private/public cooperative systems, and to build international human networks require immediate improvement.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.458-464
• /
• 2022

Hazard recognition is considered as one of the pre-requisites for effective hazard management and injury prevention. However, in complex and changing environments, construction workers are often unable to identify all possible hazards that can occur in the jobsite. Therefore, identification of factors that impact hazard recognition in the work environment is necessary to reduce safety incidents as well as to develop strategies that can improve worker's hazard recognition performance. This study identified factors/problems that impact worker's hazard recognition abilities and suggested some potential technologies that can mitigate such problems. Literature reviews of journal articles and published reports related to hazard recognition studies were conducted to identify the factors. The study found out that the major factor responsible for affecting worker's hazard recognition abilities were human-related. Industry factors, Organizational factors and Physical factors of the site were the other factors identified from the study that impact worker's hazard recognition performances. The findings from the study can help site personnel recognize areas where effective measures can be directed towards worksite safety of workers while working in complex construction environments.