• Archives of Pharmacal Research
• /
• v.28 no.8
• /
• pp.970-976
• /
• 2005

The purpose of this study was to investigate the effect of morin, a flavonoid, on the pharmacokinetics of diltiazem and one of its metabolites, desacetyldiltiazem in rats. Pharmacokinetic parameters of diltiazem and desacetyldiltiazem were determined after oral administration of diltiazem (15 mg/kg) in rats pretreated with morin (1.5, 7.5, and 15 mg/kg). Compared with the control group (given diltiazem alone), pretreatment of morin significantly increased the absorption rate constant $(K_a)$ and peak concentration $(C_{max})$ of diltiazem (p<0.05, p<0.01). Area under the plasma concentration-time curve (AUC) of diltiazem in rats pretreated with morin were significantly higher than that in the control group (p<0.05, p<0.01), hence the absolute bioavailability $(AB\%)$ of diltiazem was significantly higher than that of the control group (p<0.05, p<0.01). Relative bioavailability $(RB\%)$ of diltiazem in rats pretreated with morin was increased by 1.36- to 2.03-fold. The terminal half-life $(t_{1/2})$ and time to reach the peak concentration $(T_{max})$ of diltiazem were not altered significantly with morin pretreatment. AUC of desacetyldiltiazem was increased significantly (p<0.05) in rats pretreated with morin at doses of 7.5 and 15 mg/kg, but metabolite-parent ratio (MR) of desacetyldiltiazem was decreased significantly (p<0.05), implying that pretreatment of morin could be effective to inhibit the CYP 3A4-mediated metabolism of diltiazem. There were no apparent changes of $T_{max}$ and $t_{1/2}$ of desacetyldiltiazem with morin pretreatment. Collectively, the pretreatment of morin significantly altered pharmacokinetics of diltiazem, which can be attributed to increased intestinal absorption as well as reduced first-pass metabolism. Based on these results, dose modification should be taken into consideration when diltiazem is used concomitantly with morin or morin-containing dietary supplements in clinical setting.

• KIEAE Journal
• /
• v.7 no.5
• /
• pp.135-142
• /
• 2007

This is an experimental study on the structural characteristics of reinforced concrete beams using of the oyster shells as a substitute fine aggregate of concrete. In this study, the main factors consist of the grain sizes and the percentage of substitution of oyster shells to fine aggregate in the equal water cement ratio. The results of the study showed as followed. The initial load value of them represented similar constant within 10% of the maximum load value in each test beam. But the maximum load value and the ultimate load value decreased with increased grain size and the rate of substitution. As the grain size of oyster shells became smaller, the load values of them were somewhat higher. The deflection among deformation properties of reinforced concrete beams with oyster shells represented typical curves like that of normal reinforced concrete. In the deformation of steel and concrete, the deformation was proportionated to the load till yield point and from yield point until approaching the ultimate load point. One type was typical curve of the load and the deformation and the other type irregularly was changed to very small deformation for the load increase centering around load axis. After the analyzing structural behaviors and the properties of reinforced concrete test beams with oyster shells, the most excellent grain size of oyster shells represented 1.0mm and less or 5.0mm and less with taking uniformly, and the percentage of practicable substitution of them to fine aggregate was about 30%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• Korea journal of population studies
• /
• v.9 no.2
• /
• pp.79-92
• /
• 1986

Death is one of the population movement phenomena used as an important health index in most society. Especially it is regarded as group phenomenon in a specific group rather than individual one and considered important in public health field because the level and cause of death is related to health of public. The auther examined the changes of the Korean mortality pattern to evaluate the status of the Korean public health by studying mortality indicator using the population census and other materials from 1930 to 1980. The results are as follows: First, the Korean crude death rate was reduced to one third in 1980 compared to that in 1930, but the crude birth rate was constant from 1930 to 1960 causing the increase of population. So the population pattern is changing from the classic pyramic shape to bell shape and the dependency ratio was reduced from 78 in 1930 to 61 in 1980. Second, the infant mortality rate decrease rapidly. In 1980 it was one seventh of that in 1930 which was proved by the change of the age-specific death rate curve from U to J shape. Third, the male mortality reduction after the age of forty was much less than that of female, which explained the specific death pattern of high mortality in Korean middle and oldaged males. Fourth, the main cause of death was changed from infectious, parasitic, respiratory and digestive system disease to circulatory of tumorous diseases. Considering the above results, Korean health problem is now changing from the infant infection to geriatric chronic regressive disease. That naturally the direction of health service should be turned from the infant stage maternal and child health to the health problems of old people.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.10a
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• Applied Biological Chemistry
• /
• v.28 no.3
• /
• pp.167-173
• /
• 1985

Hot air drying characteristics of six year old cooked ginseng root at temperature ranges of $55{\sim}75^{\circ}C$ under 1.8m/sec air velocity and shrinkages accompained were investigated. Drying time to reach equilibrium moisture content of the root takes from 20 to 30 hours, depending on the subjected drying temperatures and root sizes. Drying curve shows that it has two or three falling stages and drying constant are continuously changed. Higher drying constant was observed both at early and late stages of drying. Shrinkage ratio of length, diameters, surface area and volume of the root were 13.0, 39.8, 47.7 and 68.5%, respectively, after 40 hours dry at $55^{\circ}C$. The most of shrinkage was observed at early drying stage.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.9
• /
• pp.31-37
• /
• 2013

In this study installation diameter, interval, area replacement ratio and ground hardness of applicable ground in C.G.S method should be mastered through surrounding ground by conducting modeling. Optimum artificial neural network was selected through the study of the parameter of artificial neural network and prediction model was developed by the relationship with numerical analysis and artificial neural network. As this result, C.G.S pile settlement and ground settlement were found to be equal in terms of diameter, interval, area replacement ratio and ground hardness, presented in a single curve, which means that the behavior pattern of applied ground in C.G.S method was presented as some form, and based on such a result, learning the artificial neural network for 3D behavior was found to be possible. As the study results of artificial neural network internal factor, when using the number of neural in hidden layer 10, momentum constant 0.2 and learning rate 0.2, relationship between input and output was expressed properly. As a result of evaluating the ground behavior of C.G.S method which was applied to using such optimum structure of artificial neural network model, is that determination coefficient in case of C.G.S pile settlement was 0.8737, in case of ground settlement was 0.7339 and in case of ground heaving was 0.7212, sufficient reliability was known.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.40-46
• /
• 1984

The extraction ratio of oil using solvent from the muscle of sardine, Sardinops melanosticta, was studied. The results were critically evaluated in the light of the theory of oil diffusion in a porous solid model. In addition the effect of temperature and moisture on the extraction rate was examined. Sardine muscle was prepared in a manner to meet the conditions required by the diffusion theory from Fick's law. The results of the model were well coincidenced to the theory derived from Fick's law. Diffusion constants at the direction to muscle fiber($D_1$) and at direction perpendicular to fiber($D_2=D_3$) when extracted at $45^{\circ}C$ were $8.16{\times}10^{-8}cm^2/sec\;and\;4.12{\times}10^{-8}cm^2/sec$, respectivly. The extraction rate was linearly propotional to absolute temperature(T) by eleventh power under the constant condition of moisture contents and muscle size. A comparison of the experiments with the highest($74.22\%$) and the lowest ($32.48\%$) moisture indicated that difference of $1\%$ in moisture contents caused to change the slope(K) of the extraction curve $0.53{\times}10^{-6}sec^{-1}$ approximately.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.934-941
• /
• 2002

It is important to consider the effect of member size when estimating the ultimate strength of a concrete flexural member because the strength always decreases with an increase of member size. In this study, the size effect of a reinforced concrete (RC) beam was experimentally investigated. For this purpose, a series of beam specimens subjected to four-point loading were tested. More specifically, three different effective depth (d$\approx$15, 30, and 60 cm) reinforced concrete beams were tested to investigate the size effect. The shear-span to depth ratio (a/d=3) and thickness (20 cm) of the specimens were kept constant where the size effect in out-of-plane direction is not considered. The test results are curve fitted using least square method (LSM) to obtain parameters for the modified size effect law (MSEL). The analysis results show that the flexural compressive strength and the ultimate strain decrease as the specimen size increases. In the future study, since $\beta_1$ value suggested by design code and ultimate strain change with specimen size variation, a more detailed analysis should be performed. Finally, parameters for MSEL are also suggested.