• The Korean Journal of Ecology
• /
• v.15 no.3
• /
• pp.311-328
• /
• 1992

In other to classify calcicoles and calcifuges and calcifuges within plant communities occurring on limestone and granite soils in chungbuk province, korea, soil propertile, constancy for species by prsence or absence, and ratios of soluble to insoluble $Ca^{2+}$ and $Mg^{2+}$ were investigated. In the limestone soils ph values and $Ca^{2+}$ and $Mg^{2+}$ content, ranging 7.26 ~7.48, 5.32~7.37 mg $Ca^{2+}/g$ and 0.42~0.62 mg $Mg^{2+}/g$, respectively, were higher than those in the granite soil with ph 5.76, 1.03mg $Ca^{2+}/g$ and 0.24mg $Mg^{2+}/g$. species with high constancy in the 5 communities were classified into three groups; species group a(29~36% of total number of species) was composed of species occuring on the granite soil; group c(16~24%) is commonly distributed throughout both soils. Ratios of soluble to insoluble $Ca^{2+}$ and $Mg^{2+}$ ranged from 0.1 to 81.3 in the group a, 0.2 to 0.8 in the group b and 0.2 to 8.7 in the group c. species within each group can be divided into two groups based on the values of the ratio, below or above 1.0. consequently, each of the group a and c was classified again into two groups; the group a1 and c1 with the ratio of above 1.0 and the group a2 and c2 withbelow 1.0 but the ratio could not further subdivide the group b. from these results it was proposed that plants of the group a1 were termed as obligate calcicoles, the group b as obligate calcifuges, the group c1 as facultative calcicoles, the group c2 as facultative calcifuges and the group a2 as avoiding calcifuges.

• Science of Emotion and Sensibility
• /
• v.21 no.4
• /
• pp.91-102
• /
• 2018

Although accurate time perception is necessary to properly respond to the environment, it was discovered that non-temporal features also affect time perception. Previous studies have identified various factors that affect time perception, but there was no attempt to directly investigate the possible effects of the distance between participants and the stimuli on time perception. The current study examined the effects of viewing distance on time perception, by considering the retinal, physical, and perceived size of the stimuli. The viewing distance had no effect when either the physical size or the perceived size of the stimulus was the same. Viewing distance was found only to have an effect when the retinal size of the stimulus was the same. This effect might be a size effect rather than a distance effect because as the viewing distance increases the size should also increase to maintain the retinal size. These results imply that temporal perceptual constancy is preserved irrespective of the viewing distance, when distance information is not limited.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.2
• /
• pp.83-90
• /
• 2023

Blurred image is an important factor in lowering image recognition rates in Computer vision. This mainly occurs when the camera is unstablely out of focus or the object in the scene moves quickly during the exposure time. Blurred images greatly degrade visual quality, weakening visibility, and this phenomenon occurs frequently despite the continuous development digital camera technology. In this paper, it replace the modified building module based on the Deep multi-patch neural network designed with convolution neural networks to capture details of input images and Attention techniques to focus on objects in blurred images in many ways and strengthen the image. It measures and assigns each weight at different scales to differentiate the blurring of change and restores from rough to fine levels of the image to adjust both global and local region sequentially. Through this method, it show excellent results that recover degraded image quality, extract efficient object detection and features, and complement color constancy.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.3
• /
• pp.141-150
• /
• 2017

Images obtained from underwater are usually degraded due to the environmental conditions. Some of the typical degradation factors include turbidity and color degradation. These degradations can be attributed to the absorptive and scattering properties of underwater degradation in terms of optical parameters, such as modulation transfer function (MTF), optical transfer function (OTF),point spread function (PSF), and color constancy. In this paper, we use the CODE V optical simulation software to mimic underwater conditions and model the imaging platform, thereby studying various parameters, such as PSF and MTF, and we use the PSF to remove the underwater turbidity. Experimental results show increased performance with the algorithm, compared to other existing methods.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03a
• /
• pp.26-29
• /
• 1999

Process design for elliptically shaped deep drawing products is various according to size shape and specification of products. This study presents two approaches to design the preform that is a key process for elliptically shaped products, One of these is that cross-section of punch is circular. Another is that for the improvement of characteristics for final products the cross-section of the punch is similar to rectangular shape. After forming the preform process design of top-part drawing is the same. In the study blank shape and dimension are obtained by applying a numerical formula and surface area constancy.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2002

Cutting force is obtained as a sum of chip removing force and ploughing force. Chip removing force is estimated by multiplying specific cutting pressure by cutting area. Since ploughing force is caused from dullness of a tool, its magnitude is constant if depth of cut is bigger than a certain value. Using the linearity of chip removing force to cutting area and the constancy of ploughing force regardless of depth of cut which is over a certain limit each force is separated from measured cutting force and used to establish cutting force model. New rotation matrix to convert the measured cutting force in reference axes into the forces in cutter axes is obtained by considering that tool angles are projected angles from cutter axes to reference axes.. Spindle tilt is also considered far the model. The predicted cutting force estimated from the model is in good agreement with the measured force.

• Journal of the Korean Institute of Rural Architecture
• /
• v.3 no.1
• /
• pp.41-52
• /
• 2001

This study deals with the analysis of how the residential space of the farmhouses which were recently built by farmer's free intent with the help of a person who is related with architecture was changed. So that this study is aimed at grasping how the spatial structure of recent farmhouses in the southern part of Yongdong area continues to be kept and changed according to the modernization and urbanization. Also it includes grasping the trend of spatial transformation and constancy about the recent farmhouses through the analysis of living elements as well as the extension, renewal and rehabilitation of residential space.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.938-940
• /
• 2017

본 논문에서는 화재의 조기 감지를 위하여 카메라 입력 영상으로부터 화염을 검출하는 알고리즘을 제안한다. 화염은 특정 RGB 좌표계를 가지며 지속해서 형태가 변화하며 움직인다. 제안하는 화염 검출 알고리즘은 먼저 야외 환경에서 조도의 변화에 관계없이 화염 검출 알고리즘을 적용하기 위해 Color Constancy 알고리즘을 적용한다. 그 후 화염의 RGB 좌표계와 움직임의 변화를 측정하여 후보영역을 설정하고 Opponent SURF와 SVM을 통해 최종 화염을 검출한다. 컴퓨터 시뮬레이션을 통하여 제안하는 알고리즘으로 화염을 검출할 수 있음을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• v.16 no.10
• /
• pp.1211-1221
• /
• 2002

A shape optimization of stiffener was conducted to increase buckling load or failure load with stiffened laminated composite panel of I-type under compression loading. Design variables are cap length, web length, and/or thickness under the constraint of volume constancy. The objective function is buckling load and failure load of post-buckling based on Tsai-Hill theory using ABAQUS 5.8 for analysis and Optimizer on Broydon-Fletcher Goldfarb-Sharno Method and Augmented Lagrange Multiplier Method. The effects of relative length of a web and a cap of stiffener on buckling load and failure load of post-buckling were investigated with the results of optimum design.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2013.06a
• /
• pp.258-259
• /
• 2013

광원 및 조명이 미약한 환경에서 획득된 저조도 영상은 인지적 및 색 왜곡적 측면에서 취약점을 가진다. 영상의 색 복원을 위한 연구인 색 항등성 기법은 저조도 환경에 적합하지 않기 때문에 저조도 영상을 대상으로 적용할 경우에는 좋은 성능을 내지 못한다. 이러한 문제를 해결하기 위하여 본 논문에서는 저조도 영상의 색 복원을 위한 톤 매핑 및 색 항등성 기법에 대해 분석한다. 톤 매핑 기법은 저조도 영상의 밝기를 개선해 색 항등성 기법의 적용을 가능하도록 하기 위해 사용되며, 이후 다양한 색 항등성 기법을 밝기 조절된 저조도 영상에 적용해 색 복원에 적합 여부를 판단한다.