• Journal of Plant Biotechnology
• /
• v.45 no.3
• /
• pp.266-272
• /
• 2018

A Polygonatum stenophyllum Maxim. is an important endangered plant belonging to the family Liliaceae. A method was developed for the rapid micropropagation of P. stenophyllum through plant regeneration from rhizome (1-year, 3-years, and 5-years) explant-derived calli. The rhizome segments were cultured in Murashige and Skoog (MS) medium supplemented with varying concentrations of 2,4-D (0, 0.5, 1.0, $1.5mg{\cdot}L^{-1}$) for callus induction. In media supplemented with $0.5mg{\cdot}L^{-1}$ of 2,4-D, 87% of 3-years rhizome produced callus. Subsequently, the callus was transferred to 1/2MS medium supplemented with various concentrations of IAA, IBA, NAA, and 2,4-D (0, 0.1, 0.5 and $1.0mg{\cdot}L^{-1}$) for adventitious shoot formation. The highest percentage of adventitious shoot induction (57%) was observed in 1/2MS medium containing $0.5mg{\cdot}L^{-1}$ of NAA. Elongation of the adventitious shoot was achieved in 1/2MS medium supplemented with $0.1mg{\cdot}L^{-1}$ of BA. Rooting was achieved in 1/2MS medium without any hormones. It is hypothesized that the stated in vitro propagation protocol will be useful for conservation and mass propagation of the endangered Polygonatum stenophyllum Maxim. for bioresources.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.31-41
• /
• 1997

This paper describes a potential-based panel method formulated for the prediction of the steady performance of a waterjet propulsor. The method employs normal dipoles and sources distributed on the solid surfaces such as the impeller/stator blades, hub and duct, and normal dipoles in the shed wakes trailing the impeller and stator to represent the potential flow around the waterjet propulsor. To define a closed boundary surface, the inlet and outlet open boundary surfaces are introduced where the sources and dipoles are distributed. The kinematic boundary condition on the solid boundary surface is satisfied by requiring that the normal component of the total velocity should vanish. On the inlet surface, the total inflow flux into the duct is specified, and on the outlet surface the conservation of mass principle is applied to evaluate the source strength. The solid surfaces are discretized into a set of quadrilateral panel elements and the strengths of sources and dipoles are assumed constant at each panel. Applying this approximation to the boundary conditions leads to a set of simultaneous equations. Systematic numerical tests show that the present numerical method is fast and stable. In order to validate the present method, sample computations are carried out first for the case of a conventional axial flow fan which has a similar geometry as the waterjet propulsor, and then for the case of a waterjet propulsor on which experiments are carried out at KRISO(Korea Research Institute of Ships and Ocean Engineering).

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1638-1652
• /
• 2000

Prolific females require better nutrition and feeding practice because of larger litter size and the substantial decline in body fat. Life-time pig output will be compromised if body protein and fat are not properly managed. First litter females are especially vulnerable because they can loose ${\geq}15%$ of whole-body protein. Conservation of body protein mass during first lactation minimizes wean to estrus interval and increases second litter size (up to 1.2 pigs). The ability to influence litter-size by amino acid nutrition is a new dimension in our understanding. A P2 fat depth below 12 mm at farrow and below 10 mm at wean compromised wean to estrus interval (>2 d) and next litter size (0.5 to 1.5 pigs) in sows. It is now clear that a 'modest' excess of feed during the first 72 h of pregnancy decreases embryo viability so that the potential for an increased litter size at birth is not realized. The capacity for milk production by prolific young sows is 25% higher than the standard used previously (NRC, 1988). First litter females averaged 9.82 kg milk/d for a 21 d lactation. Second and third litter counterparts averaged 10.35 kg/d. Milk production was 95% of peak by 10 d of lactation and sows were in greatest negative energy and lysine balance during the first 6 d. Nearly 45% of the total loss in body protein occurred within the first 6 d, but this could reduced to 30-35% by using a more aggressive feeding strategy after parturition. There appear to be 2 phases in lactation for lysine need (d 2-12 vs 12-21). Feeding to the higher level alleviates the second litter size decline. The lysine requirement for lactation can be predicted with accuracy, but we are not able to predict the second limiting amino acid. Mammary uptake of valine relative to lysine and recent work with practical diets suggest that the recent NRC (1998) pattern is realistic and that threonine and valine could be co-limiting for corn-soy diets for prolific sows nursing 10-11 pigs. Empirical studies are needed to refine the ideal pattern so that synthetic lysine can be used with more confidence. Milk fat output for the elite sow is extraordinary and poses an unnecessarily high energetic cost. Methods that reduce mammary fat synthesis will benefit the sow and may enhance piglet growth.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.933-940
• /
• 2009

To evaluate characteristics in spray flame, laminar counterflow is investigated on the effects of equivalence ratio and fuel by a two-dimensional DNS (direct numerical simulation). For the gaseous phase, Eulerian mass, momentum, energy, and species conservation equations are solved. For the disperse phase, all individual droplets are calculated by the Lagrangian method without the parcel model. n-Decane ($C_{10}H_{22}$) and n-heptane ($C_7H_{16}$) is used as a liquid spray fuel, and a one-step global reaction is employed for the combustion reaction model. As equivalence ratio increases, the fuel ignites early and the high temperature region spreads wider. The peak value of temperature, however, tends to once increase and then decreases with increasing equivalence ratio. The decrease in the peak value of temperature for the higher equivalence ratio condition is caused by the cooling effect associated with droplet group combustion. Since the evaporation of n-heptane is early, the high temperature region spreads wider than ndecane, but the peak values of temperature for both n-heptane and n-decane is almost same.

• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.388-395
• /
• 2015

Somatic embryogenesis is as an excellent technology for potential use in plant mass production, germplasm conservation, or genetic engineering. We examined the effect of cold storage using 3 embryogenic callus lines with different levels of embryogenesis competence derived from immature zygotic embryo cultures of Kalopanax setemlobus. Somatic embryo induction, germination and plant conversion were evaluated after 1, 3 and 6 months storage at $4^{\circ}C$ in the dark. Most cold-stored embryogenic calli formed somatic embryos normally even after 6 months; however, the induction rate was gradually decreased by increasing the storage period. The most competent line tended to show a slight decline in somatic embryo induction rate, as compared with other lines after cold storage. In general, cold storage resulted in reduced somatic embryo germination and plant regeneration, although 93% somatic embryo germination and 91% plant conversion were achieved regardless of the storage period. Cold storage led to cell browning and degradation. Additionally, the cell structures were confirmed by the aceto-carmine and evans blue dye evaluation. Collectively, our results showed that embryogenic callus of K. septemlobus could be preserved at $4^{\circ}C$ without subculture for 6 months, and suggested the need for storage of relatively more competent embryogenic calli lines to support somatic embryo induction.

• Fire Science and Engineering
• /
• v.13 no.1
• /
• pp.37-47
• /
• 1999

The spreading fire of very small floating particles after they are ignited is fast and t therefore dangerous. The research on this area has been limited to experiments and global simulations which treat them as dusts or gaseous fuel with certain concentration well m mixed with air. This research attempted micro-scale analysis of ignition of those particles modeling them as liquid droplets. For the beginning, the in-line array of fuel droplets is modeled by two-dimensional, unsteady conservation equations for mass, momentum, energy and species transport in the gas phase and an unsteady energy equation in the liquid phase. They are solved numerically in a generalized non-orthogonal coordinate. The single step chemical reaction with reaction rate controlled by Arrhenius’ law is assumed to a assess chemical reaction numerically. The calculated results show the variation of temperature and the concentration profile with time during evaporation and ignition process. Surrounding oxygen starts to mix with evaporating fuel vapor from the droplet. When the ignition condition is met, the exothermic reactions of the premixed gas initiate a and burn intensely. The maximum temperature position gradually approaches the droplet surface and maximum temperature increases rapidly following the ignition. The fuel and oxygen concentration distributions have minimum points near the peak temperature position. Therefore the moment of ignition seems to have a premixed-flame aspect. After this very short transient period minimum points are observed in the oxygen and fuel d distributions and the diffusion flame is established. The distance between droplets is an important parameter. Starting from far-away apart, when the distance between droplets decreases, the ignition-delay time decreases meaning faster ignition. When they are close and after the ignition, the maximum temperature moves away from the center line of the in-line array. It means that the oxygen at the center line is consumed rapidly and further supply is blocked by the flame. The study helped the understanding of the ignition of d droplet array and opened the possibility of further research.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.4
• /
• pp.233-246
• /
• 2009

The partitioning of evapotranspiration (ET) into evaporation (E) and transpiration (T) is critical in understanding the water cycle and the couplings between the cycles of energy, water, and carbon. In forests, the total ET measured above the canopy consists of T from both overstory and understory vegetation, and E from soil and the intercepted precipitation. To quantify their relative contributions, we have measured ET from the floors of deciduous and coniferous forests in Gwangneung using eddy covariance technique from 1 June 2008 to 31 May 2009. Due to smaller eddies that contribute to turbulent transfer near the ground, we performed a spectrum analysis and found that the errors associated with sensor separation were <10%. The annual sum of the understory ET was 59 mm (16% of total ET) in the deciduous forest and 43 mm (~7%) in the coniferous forest. Overall, the understory ET was not negligible except during the summer season when the plant area index was near its maximum. In both forest canopies, the decoupling factor ($\Omega$) was about ~0.15, indicating that the understory ET was controlled mainly by vapor pressure deficit and soil moisture content. The differences in the understory ET between the two forest canopies were due to different environmental conditions within the canopies, particularly the contrasting air humidity and soil water content. The non-negligible understory ET in the Gwangneung forests suggests that the dual source or multi-level models are required for the interpretation and modeling of surface exchange of mass and energy in these forests.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.346-355
• /
• 2012

Recent in the world environmental issues and energy depletion problems have been received attention. One way to solve these problems is to use hybrid electric vehicles (HEVs). Therefore, the interest in HEV technology is higher than ever before. Viable candidates for the energy-storage systems in HEV applications may be absorbent glass mat (AGM) lead-acid, nickel-metal-hydride (Ni-MH) and rechargeable lithium batteries. The AGM battery has advantages in terms of relatively low cost, high charge efficiency, low self-discharge, low maintenance requirements and safety as compared to the other batteries. In order to implement HEV system in required more electric power commercial vehicles AGM batteries was connected to 2 series-2 parallels (2S2P). In this study, a one-dimensional modeling is carried-out to predict the behaviors of 2S2P AGM batteries system during charge and discharge. The model accounts for electrochemical reaction rates, charge conservation and mass transport. In order to validate the model, modeling results are compared with the experimentally measured data in various conditions.

• Journal of Animal Reproduction and Biotechnology
• /
• v.34 no.4
• /
• pp.272-279
• /
• 2019

The study was conducted to evaluate the seminal attributes and cryobanking of Achhami (Bos indicus) bull semen. Of two Achhami bulls, 8 ejaculates from each bull were evaluated for seminal attributes. For semen freezing and cryo-banking, 4 ejaculates (having ≥2 mL semen volume, ≥75% of sperm motility and ≥1,000 × 10⁶ cells/mL of sperm concentration) from each bull were used. Semen samples were diluted in egg-yolk-tris-citrate extender using a two-step dilution protocol, and were frozen in liquid nitrogen (LN₂) vapour in a styrofoam box. The mean semen volume, colour, sperm mass activity, motility, viability, concentration, abnormal acrosome, midpiece and tail and, abnormal head of two Achhami bulls were 4.4 ± 0.5 mL vs. 2.5 ± 0.2 mL, 2.5 ± 0.1 vs. 2.4 ± 0.1, 3.5 ± 0.1 vs. 3.5 ± 0.1, 77.0 ± 1.1% vs. 78.3 ± 1.3%, 94.4 ± 0.5% vs. 91.0 ± 0.6%, 1137.7 ± 73.7 × 10⁶ cells/mL vs. 1060.0 ± 44.3 × 10⁶ cells/mL, 10.2 ± 0.5% vs. 10.3 ± 0.5% and 6.7 ± 0.5% vs. 8.2 ± 0.3%, respectively. The post-thawed sperm motility and viability were 53.0 ± 2.0% vs. 50.0 ± 0.0% and 80.2 ± 0.4% vs. 73.2 ± 0.7%, while evaluating by computer-assisted sperm analysis (CASA) system, the percentage of the progressive motility, fast motility, slow motility, local motility and immotile sperm were 75%, 68%, 7.4%, 16.6% and 8.6%, respectively. A total number of 620 doses semen straw were cryo-banked. Due to the acceptable post-thawed sperm motility and viability recorded, cryopreservation of Achhami semen is hereby recommended so as to preserve the Achhami breed. For further validation, the fertility will be observed from the produced frozen semen.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.1
• /
• pp.1-9
• /
• 2015

To satisfy stricter $NO_X$ emission regulations for light- and heavy-duty diesel vehicles, a control algorithm needs to be developed based on a selective catalytic reaction (SCR) dynamics model for chemical reactions. This paper presents the development and validation of a SCR dynamics model through test rig experiments and MATLAB simulations. A nonlinear state space model is proposed based on the mass conservation law of chemical reactions in the SCR dynamics model. Experiments were performed on a test rig to evaluate the effects of the $NO_X$ and $NH_3$ concentrations, gas temperature, and space velocity on the $NO_X$ conversion efficiency for the urea-SCR system. The parameter values of the proposed SCR model were identified using the experimental datasets. Finally, a control-oriented model for an SCR system was developed and validated from the experimental data in a MATLAB simulation. The results of this study should contribute toward developing a closed-loop control strategy for $NO_X$ and $NH_3$ slip reduction in the urea-SCR system for an actual engine test bench.