• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1052-1057
• /
• 2004

Bluetooth technology is essentially a method for wireless connectivity of a diverse set of devices ranging from PDAs, mobile phone, notebook computers, to another equipments, The bluetooth system both point-to point connection and point-to multipoint connection. In point-to multipoint connection, the channel is shared among several bluetooth devices. Two or more devices sharing the same channel form a piconet. There one master device and up to seven active slave devices in a piconet. The radio operates in the unlicensed 2.45GHz ISM band. This allows users who travel world-wide to use bluetooth equipments anywhere. Since the link is based on frequency-hop spread spectrum, multiple channels can exist at the same time. The bluetooth standard ha s been suggested that bluetooth equipments can be used in the short-range, maximum 100 meters. It has been defined that the time takes to setup and establish a bluetooth connection among devices is 10 seconds. It is a long time and may be a cause to lose a chance of finding other non-fixed devices. We propose a routing protocols for scatternets which can be used to control a mobile units(MUs) in this network. The proposed routing protocol is composed of two kinds of bluetooth information, access point(AP) and MU.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.2
• /
• pp.264-270
• /
• 2006

In this paper we verified that the window based TCP performance of throughput can be improved by the traffic connection efficiency. and have studied the performance of traffic congestion control that is controlling transmission rate. In wireless network, the bidirectional node is run by estimating the usage rate of link of error control idle and the throughput is shown by transmitting segments. The throughput rate shows almost no delay due to the bidirectional traffic connection efficiency up to the allowable point as increasing the transport rate by the critical value, depending on the size of end-to-end node queue of the increase of transport rate. This paper reports the performance improvement as the number of feedback connection traffic congestion control increases because of the increase of the number of asynchronous transport TCP connections.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.897-899
• /
• 2016

In recent years, BLE technology has received extensive attention and has been applied to all aspects of life. The existing BLE device has two methods, one is the connection method, and the other is a non-connection method. The representative profile of the connection method is the proximity file. The most typical example of Non-connection method BLE device is a beacon. However, they are both independent and have their own shortcomings. Connection method device can provide service for only one user, others can't use. Security performance of Non-connection method BLE device is poor and the device can't be controlled by the user. In this paper, a combination-mode BLE device profile design scheme is presented, which combines with the previous two methods, and solves the defaults. And We define a dual purpose advertising package that can be used in a normal environment as well as in a disaster environment. Finally, a unidirectional Control idea is proposed. Through performance evaluation, we found that the device has strong stability and low power consumption.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.391-399
• /
• 2018

In this paper, experimental study performed on steel-pipe connections for structural members of a greenhouse is presented. By those experiments performed, bending moment, deformation and stress distribution of specimens were investigated under four point bending test. The bending performance according to connection method using pin and the stretching is also investigated. The results of bending performance of the no connection specimen were compared to those of other connection specimens. The pin and stretching connection specimens showed lower banding performance than the no connection specimen. The stretching connection method was relatively higher bending performance than the pin connection specimens. According to the results, we proposed the connection method with good bending performance that can be applied to steel-pipe connection in greenhouse.

• New & Renewable Energy
• /
• v.6 no.2
• /
• pp.19-26
• /
• 2010

Experiences in wind farm operation are very limited in Korea, and the foundation for setting standards in power system connection is weak. Therefore, connection and operation standards for wind farms in other countries must be reviewed and power system operation criteria need to be established in order to set up connection standards and optimal operation plans according to the Jeju power system. In this study, reactive power control characteristics of a wind farm were analyzed using a wind farm model of the Jeju power system to propose power system connection operation standards for wind generation within the Jeju power system. Also, change in characteristics of the power system for the application of each reactive power control standard was confirmed, and the results were verified through trial tests arm was analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.124-126
• /
• 1989

Inverse kinematic problem is a crucial point for robot manipulator control. In this paper, to implement the Jacobian control technique we used the Hopfield(Tank)'s neural network. The states of neurons represent joint veocities, and the connection weights are determined from the current value of the Jacobian matrix. The network energy function is constructed so that its minimum corresponds to the minimum least square error. At each sampling time, connection weights and neuron states are updated according to current joint position. Inverse kinematic solution to the planar redundant manipulator is solved by computer simulation.

• ETRI Journal
• /
• v.19 no.4
• /
• pp.326-343
• /
• 1997

In this paper, we propose an ATM switch with the rate more than gigabits per second to cope with future broadband service environments. The basic idea is to separate the connection control flow from the data information flow inside the switch. The proposed switch has a dual-plane switch matrix with the synchronous control algorithm. The queuing behaviors of the proposed switch are shown by the discrete-time queuing analysis. Numerical analyses are taken both in the non-blocking crossbar switch and the banyan switch with internal blocking. Results show that a proposed dual-plane $16{\times}16$ switch would have the acceptable performance with maximum throughput of about 95 percent.

• Journal of Information Technology Services
• /
• v.19 no.5
• /
• pp.33-47
• /
• 2020

In recent years, due to the demand for operating efficiency and cost reduction of industrial facilities, remote access via the Internet is expanding. the control network accelerates from network separation to network connection due to the development of IIoT (Industrial Internet of Things) technology. Transition of control network is a new opportunity, but concerns about cybersecurity are also growing. Therefore, manufacturers must reflect security compliance and standards in consideration of the Internet connection environment, and enterprises must newly recognize the connection area of the control network as a security management target. In this study, the core target of the control system security threat is defined as the network boundary, and issues regarding the security architecture configuration for the boundary and the role & responsibility of the working organization are covered. Enterprises do not integrate the design organization with the operation organization after go-live, and are not consistently reflecting security considerations from design to operation. At this point, the expansion of the control network is a big transition that calls for the establishment of a responsible organization and reinforcement of the role of the network boundary area where there is a concern about lack of management. Thus, through the organization of the facility network and the analysis of the roles between each organization, an static perspective and difference in perception were derived. In addition, standards and guidelines required for reinforcing network boundary security were studied to address essential operational standards that required the Internet connection of the control network. This study will help establish a network boundary management system that should be considered at the enterprise level in the future.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.101-104
• /
• 2000

Nowadays, the issue of congestion control in high-speed communication networks becomes critical in view of the bandwidth-delay products for efficient data flow. In particular, the fact that the congestion is often accompanied by the data flow from the high-speed link to low-speed link is important with respect to the stability of closed-loop congestion control. The Virtual-Connection Network (VCN) in Gigabit Ethernet networks is a packet-switching based network capable of implementing cell- based connection, link-by-link flow-controlled connection, and single- or multi-destination virtual connections. VCN described herein differ from the virtual channel in ATM literature in that VCN have link-by-link flow control and can be of multi-destination. VCNs support both connection-oriented and connectionless data link layer traffic. Therefore, the worst collision scenario in Ethernet CSMA/CD with virtual collision brings about end-to-end delay. Gigabit Ethernet networks based on CSMA/CD results in non-deterministic behavior because its media access rules are based on random probability. Hence, it is difficult to obtain any sound mathematical formulation for congestion control without employing random processes or fluid-flow models. In this paper, an analytical method for the design of a congestion control scheme is proposed based on Smith＇s principle to overcome instability accompanied with the increase of end-to-end delays as well as to avoid cell losses. To this end, mathematical analysis is provided such that the proposed control scheme guarantees the performance improvement with respect to bandwidth and latency for selected network links with different propagation delays. In addition, guaranteed bandwidth is to be implemented by allowing individual stations to burst several frames at a time without intervening round-trip idle time.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.94-102
• /
• 2020

Considering that the output voltage and current of a single PV panel are limited in PV power generation, a PV array should be constructed by connecting several PV panels in series and parallel to meet the required voltage/power levels for power generation capacity. When a PV array is partially shaded, the maximum power generation depends on the configuration of a PV array and the presence or absence of blocking diodes. This study considers six PV array configurations and the presence or absence of blocking diodes. An optimum connection structure was proposed to maximize power generation in a partial shadow condition. Results were verified through simulation and an experiment.