• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.11-14
• /
• 2018

High Temperature Superconducting (HTS) power cables are capable of transmitting bulk power without any loss compared to conventional copper cables. The major challenge in the design of such HTS cables is the high stresses (electro-thermal/electro-mechanical) developed at high voltages, high currents and cryogenic temperatures. The safe and reliable operation of HTS cables involves lots of instrumentation for monitoring, measurement, control and safe operation. In principle, a four probe method for resistance (RTD PT-100) is used for temperature measurements at various locations of HTS cable. The number of connecting leads required for this is four times that of the number of sensors. The present paper discusses a novel way of connecting 128 RTD sensors with the help of only 14 leads using a cold electronics based multiplexer board. LabVIEW 11.0 software was used for interfacing and displaying the readings of all the sensors on computer screen.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.373-378
• /
• 2000

Zinc galvanized steel plates(sections) of annular corrugations have been used in buried steel culverts. These structures are referred to by a variety of names such as flexible pipes, buried pipes, soil-steel bridges, corrugated steel culverts, and etc. Buried corrugated steel structures show flexible behaviour under the soil load. compared with concrete box structures. Finite element analysis was performed to suggest the reasonable connecting method between the flexible steel culverts and the rigid concrete box. It was predicted that perfectly constrained connections could induce the excessive stress in steel plates. Therefore elastic bearing connections that allow vertical displacement at the connecting point were applied.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.821-828
• /
• 2007

This paper proposes a new algorithm to find optimal location of open switches connecting feeders in distribuion system. In order to enhance power system reliability by minimizing outage area in case of fault, the load balance among the facilities such as transformers and feeders is considered to optimize. The combination of optimal position of normal open switches can be found by moving tie along the direct path connecting two feeders related to the open switch while the whole optimization problem is separated into many small problems. The proposed algorithm is shown by case study results that, it is simple and takes short calculation time to apply to the DAS (Distribution Automation System) in KEPCO (Korea Electric Power Cooperation).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.895-898
• /
• 2001

This paper presents an optimization cutting speed(OCS) program developed to improve the machining precision and tool life in high speed machining using ball end milling. This program optimized the cutting speed that is changing at any time in free surface machining of an automobile part like a connecting load die. The technique of optimization cutting speed makes the CAD/CAM-generated NC code go through a reverse post process, conducts cutting simulation, and obtain the effective tool diameter of the ball end milling. Then it changes the spindle revolution to within the range of critical cutting speed fit for the material of the workpieces depending upon the effective tool diameter. In this study, the machining precision and tool life were compared for the two connecting load dies processed using the general cutting method and the proposed optimization cutting speed technique, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1605-1608
• /
• 2003

A unstructured tetrahedral mesh generation algorithm has been presented. To make better meshes in interior region using an advancing front technique, a connecting operator has been developed in addition to the existing operators. Before applying digging operators that generate new nodes inside of a meshing region, a connecting operator is employed that uses existing nodes which satisfy certain conditions for producing well-conditioned elements if possible. By introducing this new operator, tetrahedral meshing process becomes more robust and produces better quality of meshes.

• 한국컴퓨터산업학회논문지
• /
• 제10권3호
• /
• pp.79-86
• /
• 2009

본 논문은 센서 네트워크를 구성하는 센서노드와 베이스 스테이션들을 제한 길이 간선 최소 신장 트리를 이용하여 신속하고 효과적으로 연결하는 방법을 제안한다. 이 방법은 센서 네트워크에서 라우팅 등에 활용될 수 있는 연결 트리를 신속하게 구축한다. 2000개 입력 노드 대상의 실험에서, 제안된 방법은 단순 최소 신장 트리 방법과 비교하여 네트워크 길이의 증가 없이 네트워크 구축 시간을 94.7% 단축하였다. 이것은 제안된 방법이 센서 네트워크를 신속히 구축해야 하는 응용 등에 잘 적용될 수 있음을 보인다.

• 한국국방경영분석학회지
• /
• 제29권1호
• /
• pp.43-56
• /
• 2003

This paper is intended to investigate the Build-up Method of SCM(Supply Chain Management) Connection applying EC Standard. SCM helps companies plan and supply to meet customer demand. SCM is the only solution available today that enables an organization to strategize, plan and execute a company's buy, make, move, store, fulfill and service business processes across multiple enterprises for total profitability. The research of modern scientists has thrown new light on the subject. However, the study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM systems, which require to introduce the functions of EC, need to be changed. Summarizations of the main points that have been analyzed in this paper are as follows:. the sharing information for connection and the Rosetta-net standard of the existing SCM system(Order management module(PIP 3A4) of the Rosetta-net specifications for connection by the Rosetta-net). Finally, it shows the process of the gateway for connecting among the existing SCM systems.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.66-71
• /
• 2008

Alumium alloys hot forging process are gaining increased acceptance in the automotive and electronic industries and hot forging is one of the most efficient manufacturing method for mass product parts. It has been investigated the microstructures and mechanical properties of Al-11.7Si-0.5Mg (KNT40-T6)alloy fabricated by hot forging process for development of connecting rod in this study. The microstructure of hot forged specimen was composed of eutectic structure of alumimum solid solution and $Mg_2Si$ precipitates. The tensile strength of solutionized Al-11.7Si-0.5Mg alloy was 217MPa. This alloy showed a good corrosion resistance using electrochemical polarization test.

• 한국정밀공학회지
• /
• 제21권3호
• /
• pp.91-99
• /
• 2004

An unstructured tetrahedral mesh generation algorithm has been presented. In order to construct better meshes in interior region by using an advancing front technique, a connecting operator and a local finishing operator II have been developed in addition to the existing operators. Before applying digging operators that generate new nodes inside of a meshing region, a connecting operator is employed that uses existing nodes which satisfy certain conditions for producing well-conditioned elements. The local finishing operator II is introduced to terminate the meshing process more flexibly on remaining subregions. With these new operators, tetrahedral meshing process becomes more robust and good quality of meshes are constructed.

• 천문학논총
• /
• 제26권2호
• /
• pp.55-70
• /
• 2011

Cosmological linear perturbation theory has fundamental importance in securing the current cosmological paradigm by connecting theories with observations. Here we present an explanation of the method used in relativistic cosmological perturbation theory and show the derivation of basic perturbation equations.