• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1123-1130
• /
• 2018

Voltage stabilization is an essential component of power quality in low voltage DC (LVDC) microgrid. The microgrid demands the interconnection of a number of small distributed power resources, including variable renewable generators. Therefore, the voltage can be maintained in a stable manner through the control of these distributed generators. In this study, we did research on the new advanced operating method for a photovoltaic (PV) simulator in order to achieve interconnection to a bipolar LVDC microgrid. The validity of this voltage stabilization method, using the distributed generators, is experimentally verified. The test LVDC microgrid is configured by connecting the developed PV simulator and DC load, DC line, and AC/DC rectifier for connecting the main AC grid. The new advanced control method is applied to the developed PV simulator for the bipolar LVDC grid in order to stabilize the gird voltage. Using simulation results, the stabilization of the grid voltage by PV simulator using the proposed control method is confirmed the through the simulation results in various operation scenarios.

• Journal of the Korean Society for Railway
• /
• v.17 no.1
• /
• pp.59-69
• /
• 2014

Recently, the building of an intermodal transportation system has become the most important policy in the establishment of a national-wide sustainable transport system. In the case of rail and public transport, an intermodal connecting improvement policy is essential due to the lack of trip completeness. In particular, high-speed rail has brought dramatic changes to the transportation system in Korea and the idea of high-speed rail stations as major transportation nodes to be linked to various travel modes needs to be analyzed in terms of an intermodal network. Thus, this study proposes a new connectivity analysis method to objectively and quantitatively evaluate intermodal connecting performance for high-speed rail in terms of an intermodal network around high-speed rail stations. Seoul, Busan, Ulsan, and Sin-gyeongju stations were designated for a range of spatial analyses; detailed connecting performance indexes of travel modes connecting high-speed rail stations, and the influence sphere of these stations are analyzed, except for internal transfer facilities. Finally, this study proposes a connectivity analysis method that applies the structural equation model and develops a connectivity index.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.257-264
• /
• 2017

The PC (Precast Concrete) construction method is a technique where concrete members that have been produced in a plant are constructed on site. Thus, continuity and secure integration of a structure that can be obtained by connecting rebars at splicing joint for PC members are the main areas of concern for this method. To evaluate the splicing and bonding performance according to application of a splice sleeve for connecting rebar in this research study, the diameter of rebar, development length, grouting strength etc. were set as variables. The performance and stiffness of splicing according to the development length of grout strength were measured and evaluated. In addition, by conducting comparative analysis on each of the variables, the factors that affected the splice sleeve for connecting rebar were discussed. The results confirmed that the strength and stiffness of the splice sleeve for connecting rebar were significantly affected by the development length while the increase in performance according to grout strength was not as significant.

• The KIPS Transactions:PartA
• /
• v.18A no.5
• /
• pp.215-224
• /
• 2011

In this paper, a mechanism connecting all weighted migration routes with minimum cost with EGOSST is proposed. Weighted migration routes may be converted to weighted input edges considered as not only traces but also traffics or trip frequencies of moving object on communication lines, roads or railroads. Proposed mechanism can be used in more wide and practical area than mechanisms considering only moving object traces. In our experiments, edge number, maximum weight for input edges, and detail level for grid are used as input parameters. The mechanism made connection cost decrease average 1.07% and 0.43% comparing with the method using weight minimum spanning tree and weight steiner minimum tree respectively. When grid detail level is 0.1 and 0.001, while each execution time for a connecting solution increases average 97.02% and 2843.87% comparing with the method using weight minimum spanning tree, connecting cost decreases 0.86% and 1.13% respectively. This shows that by adjusting grid detail level, proposed mechanism might be well applied to the applications where designer must grant priority to reducing connecting cost or shortening execution time as well as that it can provide good solutions of connecting migration routes with weights.

• The KIPS Transactions:PartB
• /
• v.19B no.4
• /
• pp.221-224
• /
• 2012

The most famous algorithm of splitting and connecting Snake for extracting the boundary of multiple objects is the nearest method using the distance between snake points. It often can't split and connect Snake due to object topology. In this paper, its problem was discussed experimentally. The new algorithm using vector between Snake segment is proposed in order to split and connect Snake with complicated topology of objects. It is shown by experiment of two test images with 3 and 5 objects that the proposed one works better than the nearest one.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.85-97
• /
• 1998

The existing edge detection methods can not represent the real edge of object at fitting point or detect the edge which has unsufficient connecting trait. Especially, the two-fold thick edge detected by these methods cannot coincide real boundary of subject and it's location. To overcome these problems, we introduce the Genetic Algorithm(GA) in edge detection. The energy function is the value of fixel's satisfaction degree to edge condition. And it consists of the fitness value to image formation type, fitness value to connecting trait to it's neighboring edge and evalulation function which can represents the edge at fitting point as one fixel. This method is superior to remove the noise in edge detection than the existing methods. And it also detects the clear and exact edge because it can find the one fixel which is located at fitting point and has strong connecting trait.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.461-469
• /
• 2011

Considering the traffic condition of railroad 'KTX' links to lack of service's punctuality in nation's small/ medium cities, design guidelines with practical railroad transportation policies in terms of convenient railroadbus connection and improving comfortable ride is suggested. Following the guideline and policies, operational requirements of current railroad-bus connection system, the system's design consideration, and transportation policies and laws in relation to the bus operating companies should be analyzed to decide the practicality of the railroad-bus connecting infrastructure. Also, in order to achieve practical railroad-bus connection, connecting buses' design guideline is combined with suggested optimization method of the practicality transportation system. Lastly, the design guideline of buses as 'links,' and railroad transportation policies concerning the operation of connecting bus system for nation's small/medium cities are suggested.

• Journal of the Korean Society of Safety
• /
• v.37 no.3
• /
• pp.45-51
• /
• 2022

This paper focuses on a recently proposed asymmetric base-isolation coupling control system (ABiCS) for the vibration control of adjacent twin buildings. The ABiCS consists of inter-story diagonal dampers, a connecting damper between the two buildings, and a seismic isolation device at the base floor of one building. To investigate the control characteristics of ABiCS, a parametric study was performed by numerically simulating the 20-story twin buildings. In the parametric study, the control capacities of the inter-story diagonal dampers, connecting damper, and seismic isolation device were considered as varying parameters. The parametric study results indicate that the connecting damper between the two buildings reduces the responses of both buildings only at optimal or near-optimal capacity. In addition, adjusting the stiffness of the base isolation is found to be the most effective method for improving seismic performance and achieving cost-effectiveness. Accordingly, we presented a scenario-based performance improvement approach in which reducing the stiffness of the base isolation device could be an effective technique to improve the seismic performance of both buildings. However, note that checking the maximum allowable displacement of the base isolation device is essential.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.562-569
• /
• 2016

Recently, Low Impact Development (LID) is being used in Korea to control urban runoff and nonpoint source pollution. In this study, we evaluated the reduction of surface runoff from a study area, as the effect of connecting three bioretention as LID-BMP. Surface runoff and storage volume of bioretention is estimated by the Curve Number (CN) method. In this study, the storage volume of bioretention is divided by the volume of surface runoff and precipitation which directly enters the bioretention. The ratio of captured surface runoff volume to storage volume is highly influenced by the ratio of drainage area to surface area of bioretention. The high bioretention surface area-to-drainage area ratio captures more surface runoff. The ratio of 1.2 captures 51~54% of the total surface runoff, ranging from 5-30cm of bioretention depth; a ratio of 6.2 captures 81~85%. Three connected bioretentions could therefore captures much more runoff volume, ranging from $35.8{\sim}167.3m^3$, as compared to three disconnected bioretentions at their maximum amount of precipitation with non-effluent from the connecting three bioretentions. Hence, connecting LID-BMPs could improve the removal efficiencies of surface runoff volume and nonpoint source pollution.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.97-104
• /
• 2009

Supplementary control point and urban control point have different purpose and characteristic in the view of installation but their measurement method and permanent marker position are very similar. Therefore if we could use them by connecting those two control point, we would improve the arrangement density as well as minimizing cost of restoration from the loss of control point. So we tried to suggest the possibility of connecting these two control point and usage by analysing positional accuracy of urban control point on the base of supplementary control point in this study. The result of this study is as following. When analysing the positional accuracy of 13 urban control points of the study areas, there were RMSE of connection errors between ${\pm}8cm$ and ${\pm}11cm$ for each measurement point. The result confirmed the possibility of connecting supplementary control point to urban control point and its usage within the allowable error tolerance that the present cadastral law permits.