• International Journal of Reliability and Applications
• /
• 제18권2호
• /
• pp.45-63
• /
• 2017

In this paper, we have formulated optimum Accelerated Life Test (ALT) plan for a parallel system with two independent components using masked data with ramp-stress loading scheme and Type-I censoring. Consider a system of two independent and non-identical components connected in parallel. Such a system fails whenever all of its components has failed. The exact component that causes the system to fail is often unknown due to cost and time constraint. For each parallel system at test, we observe its system's failure time and a set of component that includes the component actually causing the system to fail. The stress-life relationship is modelled using inverse power law, and cumulative exposure model is assumed to model the effect of changing stress. The optimal plan consists in finding out the optimum stress rate using D-optimality criterion. The method developed has been explained using a numerical example and sensitivity analysis carried out.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.955-958
• /
• 2005

In this study, the wind load characteristics for a transmission tower is investigated considering the effect of the transmission lines through stochastic analysis. The assemblage of the transmission line and insulator are modeled as a double pendulum system connected to the SDOF model of the tower It is observed that the background component of the overturing moment induced by the wind response of the transmission line has considerable portion in the total overturning moment. Based on this result, a rotational viscoelastic damper (VED) is proposed for the mitigation of the transmission line reactions, which act as wind load transferred to the tower. To verify the effectiveness of the proposed strategy, time history analysis is conducted for different wind velocities and VED damping constants. From the analysis, the proposed VED is proved to be effective for mitigation of the background component rather than the resonance component of the transmission line reaction.

• Structural Engineering and Mechanics
• /
• 제54권2호
• /
• pp.379-392
• /
• 2015

A number of acceleration-based damage detection methods have been developed but they have not been widely applied in engineering practices because the acceleration response is insensitive to minor damage of civil structures. In this article, a damage detection approach using the long-gauge strain sensing technology and the principle component analysis technology is proposed. The Long gauge FBG sensor has its special merit for damage detection by measuring the averaged strain over a long-gauge length, and it can be connected each other to make a distributed sensor network for monitoring the large-scale civil infrastructure. A new damage index is defined by performing the principle component analyses of the long-gauge strains measured from the intact and damaged structures respectively. Advantages of the long gauge sensing and the principle component analysis technologies guarantee the effectiveness for structural damage localization. Examples of a simple supported beam and a steel stringer bridge have been investigated to illustrate the successful applications of the proposed method for structural damage detection.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권6호
• /
• pp.390-395
• /
• 2005

Sunspots are dark areas that grow and decay on the lowest level of the sun that is visible from the Earth. Shot-term predictions of solar activity are essential to help plan missions and to design satellites that will survive for their useful lifetimes. This paper presents a parallel-structure fuzzy system(PSFS) for prediction of sunspot number time series. The PSFS consists of a multiple number of component fuzzy systems connected in parallel. Each component fuzzy system in the PSFS predicts future data independently based on its past time series data with different embedding dimension and time delay. An embedding dimension determines the number of inputs of each component fuzzy system and a time delay decides the interval of inputs of the time series. According to the embedding dimension and the time delay, the component fuzzy system takes various input-output pairs. The PSFS determines the final predicted value as an average of all the outputs of the component fuzzy systems in order to reduce error accumulation effect.

• 한국추진공학회지
• /
• 제22권3호
• /
• pp.1-7
• /
• 2018

직결형 초음속 연소기 시험 설비를 사용하여 초음속 연소기에 대한 연소 시험을 수행하였다. 설비는 필요한 유동 조건을 모사할 수 있음을 검증하였다. 시험 조건은 유속 마하 2.0, 온도 $915^{\circ}C$, 압력 496 kPa을 15초 동안 모사할 수 있었다. 연소기 모델은 기체 수소를 연료로 사용하여 연료 당량비 0.12에서 점화 및 화염 유지가 가능함을 검증하였다. 이 유동 조건에서 연소 효율은 71%였으며 초음속 유동이 유지되었다.

• 전력전자학회논문지
• /
• 제19권1호
• /
• pp.64-70
• /
• 2014

In this paper, the new LLCL filter is proposed for grid connected three-phase PWM inverter for passive damping. LLCL filter inserts a small inductor in the branch of the capacitor of the traditional LCL filter to compose a series resonant circuit to reduce the switching-frequency component on grid current. Using LLCL filter, the switching-frequency current ripple components can be attenuated much better than the LCL filter, leading to a decrease in the total inductance. However, the resonance phenomena caused by zero impedance from the addition of LC branch in LLCL filter can be a big problem. Resonance phenomena of LLCL filter can be a source of grid system instability, so proper damping methods are required. However, it is difficult to apply a passive damping method in the conventional LLCL filter, because the damping resistor increase impedance of the LC branch. Therefore, switching frequency component of grid current can not much attenuated by low Q of LC series resonance effect. In this paper, a new LLCL filter is proposed to overcome the conventional LLCL filter with passive damping. The validity of the proposed method is proven by simulation and experimental result.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.188-194
• /
• 2013

본 논문에서는 폐 영상에서 폐 혈관을 분할하고 정제하는 방법을 제안하였다. 제안된 방법은 다음과 같이 다섯 단계로 구성된다. 첫 번째, 폐 영상에서 히스토그램 변화율의 다항식 회귀 분석을 사용하여 임계값을 계산한다. 두 번째, 계산된 임계값으로 밝기값 기반 분할 방법을 사용하여 폐 혈관을 분할한다. 세 번째, 분할한 폐 혈관 영상에 2차원 연결 요소 레이블링 방법을 사용하고, 레이블링 요소의 크기와 이심률을 계산하여 좌측 및 우측 횡격막의 씨앗점을 결정한다. 네 번째, 결정된 씨앗점에서 3차원 영역 성장법을 사용하여 횡격막을 추출한다. 다섯 번째, 이진 영상의 3차원 연결 요소 레이블링 방법을 사용하여 폐 혈관 영상의 노이즈를 제거한다.

• 한국지능시스템학회논문지
• /
• 제10권2호
• /
• pp.113-121
• /
• 2000

이 논문에서는 병렬구조 퍼지시스템(PSFS)에 기초한 카오스 시계열 데이터의 예측 알고리즘에 대해 연구하였다 병렬구조 퍼지시스템은 병렬로 연결된 여러개의 퍼지시스템에 의하여 구성되어있다. 병렬구조 퍼지시스템을 구성하고 있는 각 퍼지시스템은 다른 임베딩 차원과 시간지연을 가지고 과거의 데이터를 이용하여 동일한 데이터를 독립적으로 예측한다 퍼지시스템은 입출력 데이터를 클러스터링하여 모델링되는 MISO Sugeno 퍼지규칙에 의하여 특징지어진다. 각 퍼지시스템에 대한 최적 임베딩차원은 주어진 시간지연값에 대해서 최적의 성능을 갖도록 선정된다. 병렬구조 퍼지시스템은 각 구성요소 퍼지스템들의 예측값중에서 최대값과 최소값을 가지는 예측결과를 제외하고 나머지 값들을 평균하여 최종 예측 결과를 얻는다.

• 한국정보컨버전스학회논문지
• /
• 제1권1호
• /
• pp.1-8
• /
• 2008

JXTA는 중앙 서버를 통한 관리가 필요 없고 네트워크에 연결되어 있다면 어떤 장치든 다른 장치들과의 통신이 가능하며, 이기종 P2P시스템들과의 통신이 가능하다는 특징들이 가지고 있다. 이러한 특징을 최대한 활용하면서 서로 상이한 프로토콜과 API를 사용하여 만들어진 P2P시스템간의 상호연동을 가능하도록 하기 위한 데이터 교환 시스템을 설계하였으며, 설계된 시스템의 중요한 모듈은 생성된 요청과 요청에 대한 응답을 파싱하는데 이용하는 XML Parser Component(XPC), 적절한 요청과 응답을 생성해 내는데 사용하는 XML Making Component(XMC)의 구조를 설명한다.

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.502-509
• /
• 2019

Based on the typical pixel structure and parameters of a polysilicon uncooled bolometer, the absorption rate of a polysilicon microbridge infrared detector for 10.6 ㎛ laser energy was calculated through the optical admittance method, and the thermal coupling model of a polysilicon microbridge component irradiated by far infrared laser was established based on theoretical formulas. Then a numerical simulation study was carried out by means of finite element analysis for the actual working environment. It was found that the maximum temperature and maximum stress of the microbridge component are approximately exponentially changing with the laser power of the irradiation respectively and that they increase monotonically. The highest temperature zone of the model is gradually spread by the two corners of the bridge surface that are not connected to the bridge legs, and the maximum stress acts on both sides of the junction of the microbridge legs and the substrate. The mechanism of laser-induced hard damage to polysilicon detectors is the melting damage caused by high temperature. This paper lays the foundation for the subsequent study of the interference mechanism of the laser on working state polysilicon detectors.