• 제목/요약/키워드: configuration design

검색결과 3,138건 처리시간 0.216초

IPv6 네트워크 환경에서 MCGA를 고려한 통합적인 보안관리 방안 (Integrated Security Management with MCGA in IPv6 Network)

  • 오하영;채기준;방효찬;나중찬
    • 정보처리학회논문지C
    • /
    • 제14C권1호
    • /
    • pp.27-38
    • /
    • 2007
  • 32비트의 IPv4 주소고갈의 문제를 해결하고 보안과 QoS를 확실히 보장해 주기 위해 등장한 IPv6는 특성상 128비트로 증가된 주소공간과 네트워크를 효율적으로 관리하기 위한 주소체계, 이웃 탐색 및 주소 자동 설정 등 다양한 서비스 제공을 위해 노드와 라우터간의 주고받는 새로운 메시지들이 많이 추가되었다. 결과 IPv4에서 존재하던 공격은 물론 예측하지 못했던 새로운 공격들이 많이 등장하게 된다. IPv4에서 성공적으로 IPv6로 전환하기 위해 무엇보다 필요한 것은 안전하고 체계적인 보안 정책기반 아래 기존에 동작되고 있는 IPv4 호스트 및 라우터와 IPv6의 안전한 호환성이다. 따라서 관리자는 앞으로 도래 할 IPv6 네트워크 환경을 효율적으로 관리하기 위해서 다양한 측면에서 보안 문제를 도출하여 통합적인 보안 대응 방안을 설계해야 한다. 본 논문에서는 IPv4와 IPv6의 특성을 파악하고, IPv4/IPv6에서의 공격 측면에서 보안 취약성 분석 및 보안 문제를 도출하여 시스템 측면, IPv6 특성별 측면, 개선된 CGA인 MCGA (Modified Cryptographically Generated Address)의 제안을 통해 IPv6에서의 효율적인 보안 관리를 위한 통합적인 대응방안을 제시한다.

건강검진센터의 공간서비스 적정할당을 통한 대기시간 및 이동거리 단축에 관한 연구 (A Study on the Reduction of Waiting Time and Moving Distance through Optimal Allocation of Service Space in a Health Examination Center)

  • 김석태;오성진
    • 한국산학기술학회논문지
    • /
    • 제20권12호
    • /
    • pp.167-175
    • /
    • 2019
  • 최근 건강검진센터는 병원의 보조시설에서 핵심적이고 독립적인 의료시설로 위상이 높아지고 있다. 그러나 검진센터를 비롯한 의료시설들은 공간 및 인간간의 관계가 주체가 되는 가변적 특성으로 인하여 개선이 쉽지 않다. 이에 검진센터의 문제점과 및 개선방법을 발견하기 위하여 보행자 기반 이산사건시뮬레이션 분석프로그램을 개발하고자 하였다. 프로그램은 5가지 평가지표와 수검자 밀도를 분석할 수 있도록 구축하였으며, 시뮬레이션을 통해 소요시간, 수용능력, 검사항목별 대기열 규모를 분석하여 문제점을 도출하였다. 제안된 평가방법을 통해 검사시간이 길어지는 가장 큰 원인은 대기열의 증가와 집중에 의한 장시간 대기자의 발생으로 밝혀졌다. 적정한 서비스 재배분으로 대기열을 분산시켜 검사시간을 크게 단축시킬 수 있었으며 조정안의 검증 결과, 수검인원 18% 증가, 1인당 수검시간 15% 단축, 이동거리 5.5% 단축의 효과를 정량적으로 계산해 낼 수 있었다. 또한 히트맵 분석과 병행한 공간 재배치 계획으로 복도의 교차부에 집중되었던 과밀현상을 해소할 수 있었으며, 이는 통행자와 대기자간의 혼잡을 줄이는 긍정적 효과를 가져올 것이다. 본 연구는 분석프로그램을 구축하기 위한 기초적 성격을 가진 알고리즘 중심의 검토연구이지만, 이러한 복잡계 시뮬레이션 분석방법론은 운영 중인 시스템을 중단시키지 않으면서도 저비용의 최적 대안을 도출하는 도구로서 충분한 활용가치를 가질 수 있을 것으로 기대하고 있다.

Membership Wholesale Club에서의 RRP 적재패턴 및 블록패턴 표준규격에 관한 연구 (RRP Loading Patterns and Standard Dimensions for Block Pattern in Membership Wholesale Clubs)

  • 정성태;한규철
    • 유통과학연구
    • /
    • 제13권7호
    • /
    • pp.41-51
    • /
    • 2015
  • Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

전통시장 상인대학 교육서비스 품질이 경영성과에 미치는 영향 (The Impacts of Education Service Quality in the Traditional Market Merchant College on Business Performance)

  • 최동규;황희중;송인암
    • 유통과학연구
    • /
    • 제11권10호
    • /
    • pp.81-92
    • /
    • 2013
  • Purpose - This study empirically analyzes the effect of improvements in the quality of service management performance of college education on traders' conscious change of business management innovation and diverse sales expertise for a year. The use of traders' conscious changes and sales expertise as variables for the verification of the effects of parameters related to the active trader's traditional education market is a desirable direction. The method of research reflects the quality of education service, management result, traders' conscious changes, and sales expertise to understand the precise essence and definition of teaching quality at merchant colleges through theoretical consideration. Moreover, its impact on traders' conscious changes and sales expertise in empirical analysis acts as an intermediary. Research design, data, methodology - The hypothesis of this study leverages the SPSS statistical program. To gather actual proof, sample survey for theoretical research examined 262 valid papers of the 300 papers written by 10 merchants who graduated from merchant's university. First, using the SERVQUAL model, Parasuraman et al. (1996) indicated that for quality of education service, the configuration of factors is the same as the sympathetic performance, that is, responsiveness and empathy, and traders are aware of these elements. However, our preliminary investigation revealed that traders' university education has been excluded as a component of quality of service in the earlier studies. Moreover, we found that certainty of knowledge, reliability, and sympathy are influenced by challenges and by the changing intentions of merchant consciousness. In addition, our study confirms that improvements in convincing abilities and sales technique have a positive impact. Second, merchants' and traders' expertise are proven to affect business performance. In other words, university education of traders and merchants affects the consciousness of consumers, and changes patterns of sales. Third, the quality of service management education and change in the consciousness has a considerable impact on the trader, thereby maximizing business performance and acting as an intermediary for verification. Fourth, the quality of service management education affects the trader's sales expertise to maximize business performance. Results - To summarize, the quality of college educational services relates to the improvement of business performance and the role of the resulting virtuous cycle. Consequently, we can look for suggestions in the traditional markets, where the Government pays attention to the exterior environmental factors as well as to the changing business environment. However, the most important aspect is the merchant awareness. That is, a merchant should understand the distribution environment. Several competitor and trend analyses should be conducted to meet customers' expectations positively and proactively cope with any challenges related to changes. Further, expertise in sales and marketing skills need to be acquired to improve customer convincing abilities and develop a customer-oriented mindset. Conclusions - According to the changes in consumption trends of business enterprises, new management techniques are required to survive competition by improving traditional markets, which will necessitate more competitive education programs in merchant universities.

연체동물 전용 서열 블라스트 서버구축 (Construction of BLAST Server for Mollusks)

  • 이용석;조용훈;김대수;김대원;김민영;최상행;연제오;변인선;강보라;정계헌;박홍석
    • 한국패류학회지
    • /
    • 제20권2호
    • /
    • pp.165-169
    • /
    • 2004
  • 본 연구를 통해서 http://chimp.kribb.re kr/mollusks 에 연체동물 전용 서열 BLAST 데이터베이스가 구축되었다. 예비실험을 통해 본 결과와 마찬가지로 연체동물을 대상으로 한 유전자 정보만을 매우 빠른 속도로 얻을 수 있었다. 본 시스템을 사용하여 앞으로 많은 연구가 진행되어질 연체동물 유전자 연구 및 EST 연구에 많은 도움이 되리라고 사료된다.

  • PDF

헬리컬 터빈의 설계인자에 따른 성능 연구 (Parametric Numerical Study on the Performance of Helical Tidal Stream Turbines)

  • 한준선;최다혜;현범수;김문찬;이신형;송무석
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제14권2호
    • /
    • pp.114-120
    • /
    • 2011
  • 조류발전용 다리우스 터빈의 변형된 형태인 헬리컬 터빈의 설계 인자 변화에 따른 성능을 수치해석으로 살펴보았다. 헬리컬 터빈은 수직축 다리우스 터빈을 회전축을 중심으로 상부와 하부를 비틀리게 함으로써 다리우스 터빈의 일반적인 취약점인 초기구동불량과 진동문제를 개선하기 위해 고안된 형태이다. 본 논문에서는 헬리컬 터빈의 비틀림각(Twisting Angle)과 직경대비 높이를 변화시키며 수치해석을 수행하였고, 결과를 바탕으로 최적의 구조를 제안하였다. 3차원 비정상 난류유동해석을 위하여 FLUENT의 RANS방정식과 k-${\omega}$ SST 난류모델을, 격자계 모델링을 위하여 GAMBIT을 이용하였다. 헬리컬 터빈은 적절한 비틀림각에서 양호한 발전효율을 보장하면서 진동을 유발하는 회전력 변화의 진폭을 최소화 할 수 있음을 확인하였고, 효율의 최대가 확보되는 터빈의 최소 높이를 발견하였다.

곡물(穀物)의 함수율(含水率) 변화(變化)에 따른 송풍저항(送風抵抗)에 관(關)한 연구(硏究) (Resistance to Airflow of Grain as Affected by Grain Moisture Content)

  • 김만수;김성래
    • Journal of Biosystems Engineering
    • /
    • 제11권2호
    • /
    • pp.55-65
    • /
    • 1986
  • The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.

  • PDF

570MPa급 고강도강을 적용한 콘크리트 채움 U형 하이브리드 합성보의 휨거동 및 설계 (Flexural Behavior and Design of Concrete-filled U-shape Hybrid Composite Beams Fabricated from 570MPa High-strength Steel)

  • 이철호;소현준;박창희;이창남;이승환;오하늘
    • 한국강구조학회 논문집
    • /
    • 제28권2호
    • /
    • pp.109-120
    • /
    • 2016
  • 본 연구에서는 콘크리트 채움 U형 하이브리드 합성보의 실물대 휨 실험을 수행하고 평가하였다. U형 강판의 웨브에는 공칭인장강도 400MPa 일반강종의 강재(SS400) 하부플랜지에는 공칭인장강도 570MPa 고강도 강재(SM570)의 강판을 각각 적용하였다. 연구의 주요 목적은 최대의 휨성능을 발현할 수 있는 하이브리드 단면구성과 설계지침의 개발이었다. 4점 단조가력실험의 수행을 통해 제안된 모든 하이브리드 합성보 실험체들은 의도한대로 소성모멘트 이상의 강도발현과 충분한 연성거동을 나타내었다. 그리고 하이브리드 합성단면의 소성중립축의 위치가 상부 콘크리트 기준으로 합성단면 전체깊이의 15%이내에 존재할 경우 휨강도 산정 시 소성응력분포법의 적용이 가능할 것으로 판단되었다. 또한 실험결과를 기반으로 하이브리드 합성보에 적합한 강성산정과정을 제안하였다.

Silver nanowires and nanodendrites synthesized by plasma discharge in solution for the catalytic oxygen reduction in alkaline media

  • 김회근;송면규;김동우;이상율
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2018년도 춘계학술대회 논문집
    • /
    • pp.62-62
    • /
    • 2018
  • Pt is still considered as one of the most active electrocatalysts for ORR in alkaline fuel cells. However, the high cost and scarcity of Pt hamper the widespread commercialization of fuel cells. As a strong candidate for the replacement of Pt catalyst, silver (Ag) has been extensively studied due to its high activity, abundance, and low cost. Ag is more stable than Pt in the pH range of 8~14 as the equilibrium potential of Ag/Ag+ being ${\approx}200mV$ higher than that of Pt/PtO. However, Ag is the overall catalytic activity of Ag for oxygen reduction reaction(ORR) is still not comparable to Pt catalyst since the surface Ag atoms are approximately 10 times less active than Pt atoms. Therefore, further enhancement in the ORR activity of Ag catalysts is necessary to be competitive with current cutting-edge Pt-based catalysts. We demonstrate the architectural design of Ag catalysts, synthesized using plasma discharge in liquid phase, for enhanced ORR kinetics in alkaline media. An attractive feature of this work is that the plasma status controlled via electric-field could form the Ag nanowires or dendrites without any chemical agents. The plasma reactor was made of a Teflon vessel with an inner diameter of 80 mm and a height of 80 mm, where a pair of tungsten(W) electrodes with a diameter of 2 mm was placed horizontally. The stock solutions were made by dissolving the 5-mM AgNO3 in DI water. For the synthesis of Agnanowires, the electricfield of 3.6kVcm-1 in a 200-ml AgNO3 aqueous solution was applied across the electrodes using a bipolar pulsed power supply(Kurita, Seisakusyo Co. Ltd). The repetition rate and pulse width were fixed at 30kHz and 2.0 us, respectively. The plasma discharge was carried out for a fixed reaction time of 60 min. In case of Ag nanodendrites, the electric field of 32kVcm-1 in a 200-ml AgNO3 aqueous solution was applied and other conditions were identical to the plasma discharge in water in terms of electrode configuration, repetition rate and discharge time. Using SEM and STEM, morphology of Ag nanowires and dendrites were investigated. With 3.6 kV/cm, Ag nanowire was obtained, while Ag dendrite was constructed with 32 kV/cm. The average diameter and legth of Ag nanowireses were 50 nm and 3.5 um, and thoes values of Ag dendrites were 40 nm and 3.0 um. As a results of XPS analysis, the surface defects in the Ag nanowires facilitated O2 incorporation into the surface region via the interaction between the oxygen and the electron cloud of the adjacent Ag atoms. The catalytic activity of Ag for oxygen reduction reaction(ORR) showed that the catalytic ORR activity of Ag nanowires are much better than Ag nanodendrites, and electron transfer number of Ag nanowires is similar to that of Pt (${\approx}4$).

  • PDF

NiTi Rotary Instruments에 의한 근관형성이 치근단부 근관형태에 미치는 영향 (THE EFFECT OF NITI ROTARY INSTRUMENTATION ON THE CONFIGURATION OF APICAL ROOT CANAL)

  • 오현정;홍찬의;조용범
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.244-253
    • /
    • 1997
  • During preparation of narrow curved canals, procedural accidents such as, ledge, zipping, and transportation are frequently encountered and may lead to failure of endodontic therapy. To reduce these procedural errors and efficiently manage curved canals, various modifications in instrumentation technique and the design and flexibility of instruments have been advocated. This study compared the maintenance of the original canal curvature, cross sectional canal shape, and preparation time during instrumentation with stainless steel hand (K-Flexo) file, and nickel-titanium rotary files (Profile and Lightspeed). Thirty resin blocks with simulated curved canals of 20~25 degrees were used and divided into three groups of 10 each. In group 1, canals were instrumented using a quarter turn/pull technique with K-Flexofiles. Group 2 canals were prepared with rotary NiTi Profiles. Group 3 was prepared with rotary NiTi Lightspeed instrument. Before and after instrumentation, all canals were scanned using stereo microcope, FlexCam camera, and Photoshop 3.0 computer program. The results were as follows : 1. All groups showed some loss of canal curvature after instrumentation. Average loss of canal curvature was 8.6 degrees for K-Flexofile, 7.7 degrees for Profile, and 5.8 degrees for Lightspeed. Lightspeed exhibited significantly less curvature loss than K-Flexofile (p<0.05). 2. At the apical 1-mm level, Profile produced significantly rounder canals than Lightspeed (p<0.05). At the 3-mm level, Profile and Lightspeed exhibited significantly rounder canals than K-Flexofile (p<0.05). 3. Preparation with Lightspeed was significantly faster than Profile and K-Flexofile, and Profile was faster than K-Flexofile (p<0.05). 4. There was no significant difference in incidence of zipping between the hand K-Flexofile and rotary NiTi (Profile and Lightspeed) instruments. Most of apical canals were slightly widened near the apical foramen. As a results of this study, rotary NiTi instruments are superior to the K-Flexofile in regard to the maintenance of original canal curvature, cross-sectional shape and preparation time. But more investigations and studies should be needed to evaluate the ideal canal instrumentation.

  • PDF