• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.243-244
• /
• 2013

This paper introduces the application of Profibus field bus communication in HVDC power system. Discusses about the configuration of HVDC system and the structure of control and protection system. Analyzes and designs the network configuration of field device level. Using OPAS engineering tool to config IO system and at the same time monitor data in SCADA HMI.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.265-268
• /
• 2003

Using CBD methodology, Components have been developed. In this paper, we explained that Object-oriented Design frameworks are increasingly recognized as better components than objects. And we discussed the framework concept and component configuration management method using changes. Finally, we explained object sharing in several frameworks and new framework creation process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.567-571
• /
• 1996

The objective of STEP is to provide neutral mechanism capable of describing product data through the life cycle of a product, independent form any particular systems. This paper describes an STEP application program that can display the three-dimensional shape based on b-spline surface and the data which defines configuration of the product. The developed program is based on the STEP part 203 “Configuration controlled design”.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.331-334
• /
• 2003

This letter presents the design and measured performance of bandpass filters based on a stacked-SIR (stepped impedance resonators) configuration with DGS (Defected Ground Structure). An unit DGS configuration is designed and analyzed to show the phase characteristic of proposed slow-wave structure. The SIR filter with DGS has been yielded better stop band and sharper skirt behavior than conventional bandpass filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.53-57
• /
• 1998

Star tracker placement configuration is proposed and the properness of the placement configuration is verified for star tracker's sun avoidance angle requirement. Precision attitude determination system is successfully designed using a gyro-star tracker inertial reference system for a candidate LEO spacecraft. Elaborate kalman filter formulation for a spacecraft is proposed for covariance analysis. The covariance analysis is performed to verify the capability of the proposed attitude determination system. The analysis results show that the attitude determination error and drift rate error are good enough to satisfy the mission of a candidate spacecraft.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.325-327
• /
• 2003

형상관리가 소프트웨어 개발과 유지보수 단계에서 중요하게 사용되고 있다. 연구와 실제 구축을 거듭하면서 형상관리는 소프트웨어 개발의 성숙한 기술이 되었다. CBSD(Component Based Software Development)는 소프트웨어 개발의 새로운 패러다임으로 자리 잡고 있다. 즉. CBSD가 소프트웨어 재사용과 소프트웨어 컴포넌트 기술에 관한 연구로 시작되어 왔고. 소프트웨어 개발에 새로운 패러다임으로 인식되고 있다. 그러나 CBSD에 관한 형상관리 연구가 뒤따르지 못하였고, 관련 문헌도 상당히 미흡한 실정이다. 본 논문에서 설계한 모델은 CBSD를 더 효율적으로 지원하기 위하여 사용될 것이다. 또한 본 모델은 CBSD 개념을 이용한다. 이 모델은 전통적인 소프트웨어 형상관리(SCM ; Software Configuration Management)와 관련이 있고 이를 컴포넌트 환경을 지원하도록 개선시킨 모델이다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.1
• /
• pp.24-32
• /
• 2018

In this paper, analytical studies were conducted to obtain optimal design factors and analysis parameters of liquid nitrogen cooling exchanger applied in cryogenic refrigerator. The target value of heat transfer rate was more than 1 kW and pressure drop was less than 40 kPa. Design factors of cryogenic heat exchanger included width of channel and configuration of paths. Analytical factors of liquid nitrogen cooling exchanger included temperatures of coolant header surface and inlet liquid nitrogen. The width and number of channels in the design parameters were 0.0050~0.0150 m and 4~8, respectively. The configuration of channel path was 4 ways. Temperatures of coolant header surface and inlet liquid nitrogen in analytical parameters were 74 to 78K and 82 to 86K, respectively. As result, the design factor and analysis parameter satisfying the target values were obtained. The biggest heat transfer rate was 1.36 kW with pressure drop of 32.26 kPa.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.1
• /
• pp.70-80
• /
• 2004

This study proposes a development result for the 1-kW class small wind turbine system, which is applicable to relatively low wind speed regions like Korea and has the variable pitch control mechanism. In the aerodynamic design of the wind turbine blade, parametric studies were carried out to determine an optimum aerodynamic configuration which is not only more efficient at low wind speed but whose diameter is not much larger than similar class other blades. A light composite structure, which can endure effectively various loads, was newly designed. In order to evaluate the structural design of the composite blade, the structural analysis was peformed by the finite element method. Moreover both structural safety and stability were verified through the full- scale structural test.

• Journal of Korea Game Society
• /
• v.5 no.1
• /
• pp.33-40
• /
• 2005

Game Designs & Developers that system designs improve, the product and the change of tasks to all developers are essential in achieving On-Line Game project. Existent Or-line Game project management designs supper the definition and the change of project activities, and configuration management designs support version check, workspace management, build management, etc. In this paper. the proposed Design defines Game component based development process model, and achieves recording of process progression, processing the request of change, reporting the progression of each task, product registering and change, version recording, artifact or form search, etc. using UML. Furthermore, study on the stake holders get the systematic management and standardization by sharing information that are necessary in Game design & development and configuration management in distributed environment using the system integrated management design.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.88-89
• /
• 2002

The aims of this study is to realize the structural design for development of a medium scale E-glass/epoxy composite wind turbine blade for a 750KW class horizontal axis wind turbine system. In this study, the various load cases specified by the IEC61400-1 international specification and GL Regulations for the wind energy conversion system were considered, and a specific composite structure configuration which can effectively endure various loads such as aerodynamic and centrifugal loads, loads due to accumulation of ice, hygro-thermal and mechanical loads was proposed. In order to evaluate the structure, the structural analysis for the composite wind turbine blade were peformed using tile finite element method(FEM). In the structural design, the acceptable blade structural configuration was determined through the parametric studies, and the most dominant design parameters were confirmed. In the stress analysis using the FEM, it was confirmed that the blade structure was safe and stable in any various load cases Moreover the safety of the blade root joint with insert bolts, newly devised in this study, was checked against the design fond and the fatigue.