• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1553-1555
• /
• 1994

In this paper, we describes the research in condenser cone of $SF_6$ gas sealing end for 345KV oil-filled cable. The designed of condenser cone based on the results electric field analysis by electrostatics theory ana FEM. As a results. we have been designed the condenser cone and the inner insulation part of $SF_6$ seating end, the width and length, the number of condenser, the length of stress relief slope, the total length of condenser cone.

• The Korean Journal of Ecology
• /
• 제14권4호
• /
• pp.361-370
• /
• 1991

The cone and seed production of pitch pine were investigated at two areas(songtan and yangdong) located in kyounggi province. Bymeans of formulas derived from both the regression analysis between the number of seeds and cone length, and between d2·h and number of cones, cone and seed production were estimated. The correlation coefficient value between the number of seeds and cone length was high(r=0.6134). The cone and seed production of pitch pine has a high relationship to the variables-dbh, tree aga , and height of tree. The cone production of pitchpine forest estimated by the formula log(o+s+y+c)=0.581 log(d2·h)-1.317 was 965,832/ha in 1985∼1986, 850,852/ha in 1986∼1987 at songtan, and 462,794/ha in 1985∼1986,916,965/ha in 1986∼1987 at yangdong.

• 한국분무공학회지
• /
• 제9권1호
• /
• pp.21-29
• /
• 2004

The flow characteristics of a swirl injector were investigated with the variation of the flow condition and geometric dimensions, such as orifice length for considering the viscous effect and tangential entry port area for considering the swirl intensity. The liquid film thickness strongly influencing on the formed drop size of the spray was measured using a new technique. The film thickness measurement technique proposed here, used the attenuation of fluorescence signal near the injector exit. The breakup length that is important for the flame location as well as the spray cone angle which influences on the ignition performance was measured using a backlit stroboscopic photography technique. From the experimental results, it is found that an increase in injection pressure decreased the film thickness and breakup length, and also enlarged the spray cone angle. A decrease in orifice length and tangential entry port area has a similar tendency of thinner film thickness, shorter breakup length and larger spray cone angle. In the present study, we proposed empirical models of the flow characteristics of the swirl injectors.

• Journal of Biosystems Engineering
• /
• 제19권1호
• /
• pp.9-16
• /
• 1994

135 and 136 pine cones were sampled from age class of II to VI Korean pine trees for the study of their physical properties in 1991 and 1992, respectively. The length, width, weight, volume, and the largest projected area of cones were measured, and the specific gravity, apparent volume ratio sphericity, and roundness were calculated. Regression analysis were performed for the weight, volume, and projected area to the cone length and width. The length, and major and minor diameters of the cone stalks were measured and analyzed. 1. The range of the length of cone stalks was 0 to 47.3mm. The average length of stalks were 9mm ('91) and 10mm('92), respectively. Cross section of the stalks was ellipse with average major and minor diameters of 9.1mm and 10.1mm, and 8.6 and 8.7mm in 91 and 92, respectively. 2. The length of pine cones distributed from 8cm to 17cm and the average length were about 13cm('91, '92). The width varied from 5cm to 9.5cm and the average width were 6.7cm('91) and 6.9cm('92). The ratios of the length to the width were 0.56('91) and 0.65('91) and the shape of the cones were found to be ellipse with minor diameter of 1/2 to 2/3 of the major diameter. 3. The roundnesses and sphericity of cones were 0.74 and 0.75('91), 0.63 and 0.67('92), respectively. The average of the largest projected area of cones were $85.3cm^2$('91) and $93.1cm^2$('92) and the criterion areas were $71.0cm^2$ and $74.5cm^2$, respectively. 4. Cone weights were from 83g to 467g('91 and '92) and averages were 186g('91) and 220g('92). The average specific gravities were 0.89 and 0.96('91 and '92). The true volumes were $212cm^2$('91) and $230cm^2$('92), and the average bulk volume was $321cm^2$('91, '92). The average apparent volume ratios of cones were 35% ('91) and 28% ('92), respectively. 5. The weight and the volume were proportional to the length of the cone multiplied by the width squred and the largest projected area was proportional to the length multiplied by the width of cones.

• 대한치과의사협회지
• /
• 제53권12호
• /
• pp.967-974
• /
• 2015

Purpose: This study was performed to investigate the characteristics of mandibular incisive canal (MIC) in Korean population. Materials and methods: A total of 97 subjects (60 males and 37 females) who underwent cone-beam computed tomography were included in the study. The anatomic features of MIC was assessed according to gender. Length, diameter and distance to inferior, lingual and buccal border were measured at the origin and the terminal. Also the distribution of MIC at each tooth position was evaluated. Results: Of 97 patients included, 75(77.3%) presented bilateral MIC and 13(13.4%) presented unilateral MIC. Of 194 hamimandibles, MIC was detected in 102(85%) sites in male and 61(82.4%) sites in female. Gender and side showed no statistically significant differences in detectability. The length, diameter and distance to adjacent structures were bigger in male than in female except the distance to lingual border. MIC travelled anteriorly in a slightly downward and lingual direction and usually terminated between the first premolar and the canine. On cross-sectional view, MIC showed individually scattered distribution both buccolingually and superoinferiorly. Conclusion: MIC is well detected with cone-beam computed tomography. Considered that the length and the location of MIC has large variations between individuals, its localization using cone-beam CT is highly recommended before performing surgical procedures such as implant placement and bone harvesting.

• 한국분무공학회지
• /
• 제16권4호
• /
• pp.201-209
• /
• 2011

Optimum engine performance is obtained when the spray characteristics is well matched to the geometry of a combustion chamber. Among many parameters governing the combustion performance in internal combustion engine, fuel supply characteristics and atomization are important performance factors. Therefore, spray characteristics of high pressure multi-hole injector has been studied experimentally. An experimental test system has been made to operate high pressure injection system and to visualize spray behavior. Spray visualization has been performed to analyze spray formation, spray cone angle, bent angle and penetration length. Spray interaction with piston has been analyzed with various injector installation angle, injection pressure and ambient pressure. Test results show that penetration length is greatly influenced by the injection pressure. Penetration length is decreased as ambient pressure increased. Spray cone angle is increased as injection pressure and ambient pressure increased. However, bent angle is not influenced by the change of injection pressure and ambient pressure. Spray cone angle distribution map is plotted using the experimental data. Fuel movement around the spark-plug has been enforced as increasing injector installation angle.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.57-60
• /
• 2011

GCSC 분사기의 리세스 길이와 기체/액체의 운동량 플럭스 비(MFR) 변화에 따른 분무 특성을 고압 챔버를 이용한 고압수류시험을 통해 알아보았다. 물과 질소를 사용하였고, back-lit strobe imaging 기법을 이용하여 분무형상을 촬영하였다. 시험결과 MFR이 작을 때(액체 유속 고정)는 분무각이 큰 hollow cone 형상을 보이고, MFR이 증가함에 따라 분무각이 작은 solid cone 형상의 분무를 보였다. 또한 리세스가 짧은 분사기일수록 더 큰 MFR에서 solid cone 형상의 분무를 보였다.

• 유공압시스템학회논문집
• /
• 제2권3호
• /
• pp.1-5
• /
• 2005

There are two types of solenoid actuator for force and position control of the fluid power system. One is an on-off solenoid actuator and the other is an electro-magnetic proportional actuator. They have some different characteristics for attraction force according to solenoid shape. Attraction force of the on-off solenoid actuator only depends on flux density. And the stroke-force characteristics of the proportional solenoid actuator are determined by the shape of the control cone. In this paper, steady state characteristics of the solenoid actuator for electro-hydraulic proportional valve determined by the shape of control cone are analyzed using finite element method and it is confirmed that the proportional solenoid actuator has a constant attractive force in the control region independently on the stroke position. And the shape of control cone is optimized using 1+1 evolution strategy to get a constant force. In the optimization algorithm, control cone length, thickness and taper length are used as a design parameter.

• Applied Microscopy
• /
• 제47권4호
• /
• pp.238-241
• /
• 2017

A study on the visual cell and eyeball of the endemic Korean species Liobagrus mediadiposalis was investigated by light and electron microscopes. The retina of a small and 2 mm-diameter round eye was thin, $151.0{\pm}4.0{\mu}m$ and has two visual cells, a single cone and a rod cell. The single cone cells are short and thick, $18.0{\pm}0.9{\mu}m$ in length and $5.1{\pm}0.7{\mu}m$ (n=30) in diameter, while the rod cells are longer and thinner, $54.8{\pm}2.9{\mu}m$ in length and $3.3{\pm}0.6{\mu}m$ in diameter. The cone cells are seen an irregular and random mosaic pattern, and the rod cells are also randomly situated at between cone cells. As a rare phenomenon, such structure is one of characteristics reflecting the eye of a nocturnal and bottom-dwelling freshwater fish. The ultrastructure of visual cells was observed with scanning and transmission electron microscopy, both cone and rod cells are divided into an inner segment with numerous mitochondria and an outer segment with stacks of membrane discs.

• 한국자원식물학회지
• /
• 제25권4호
• /
• pp.401-406
• /
• 2012

국내 유일 설악산에만 분포하는 희귀수종 눈잣나무의 현지외 보존을 위한 종자수집에 따른 구과보호망의 효과와 수집된 구과와 종자의 형태적 특성 변이를 조사하였다. 철망으로 설치된 구과보호망(50 mesh, 25 ${\times}$ 25 cm)은 설치류나 조류 등의 피해를 방지할 수 있으며 안정적인 종자유전자원 확보가 가능한 것으로 나타났다. 특히, 7월 초순부터 설치하는 것이 처리효과가 매우 높은 것으로 나타났다. 눈잣나무 구과는 열개하지 않는 폐과이며 종자에는 날개가 없고 주로 잣까마귀와 설치류 등의 먹이저장 습성에 의해 종자가 산포된다. 구과의 형태적 특성 변이는 개체간 유의적인 차이가 인정되었으며, 평균특성은 구과길이 35.3 mm, 구과폭 25.6 mm, 구과지수 1.38, 구과건중 6.6 g, 구과당 종자수 39.3립을 각각 나타냈다. 종자는 삼각모양의 달걀형으로 날개가 없으며 개체간 유의적인 차이가 인정되었다. 평균특성은 종자길이 8.12 mm, 종자폭 5.81 mm, 종자지수 1.40,종자두께 4.62 mm, 종자무게 0.11 g을 각각 나타냈다. 변이계수 값은 구과건중과 구과당 종자수에서만 비교적 높은 21.7%와 21.5%를 각각 나타냈다. 구과와 종자특성 상관분석에서는 구과와 종자의 길이가 길어질수록 전체적인 크기가 커지고 모양이 길어지며, 무게도 많이 나가는 경향을 나타냈으며, 또한 종자폭이 넓고 종자두께가 두꺼울수록 구과당 종자수는 작아지는 부의 상관관계를 나타냈다.