• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.126-132
• /
• 2014

PURPOSE. This study was conducted to evaluate the influence of the implant-abutment connection design and diameter on the screw joint stability. MATERIALS AND METHODS. Regular and wide-diameter implant systems with three different joint connection designs: an external butt joint, a one-stage internal cone, and a two-stage internal cone were divided into seven groups (n=5, in each group). The initial removal torque values of the abutment screw were measured with a digital torque gauge. The postload removal torque values were measured after 100,000 cycles of a 150 N and a 10 Hz cyclic load had been applied. Subsequently, the rates of the initial and postload removal torque losses were calculated to evaluate the effect of the joint connection design and diameter on the screw joint stability. Each group was compared using Kruskal-Wallis test and Mann-Whitney U test as post-hoc test (${\alpha}$=0.05). RESULTS. The postload removal torque value was high in the following order with regard to magnitude: two-stage internal cone, one-stage internal cone, and external butt joint systems. In the regular-diameter group, the external butt joint and one-stage internal cone systems showed lower postload removal torque loss rates than the two-stage internal cone system. In the wide-diameter group, the external butt joint system showed a lower loss rate than the one-stage internal cone and two-stage internal cone systems. In the two-stage internal cone system, the wide-diameter group showed a significantly lower loss rate than the regular-diameter group (P<.05). CONCLUSION. The results of this study showed that the external butt joint was more advantageous than the internal cone in terms of the postload removal torque loss. For the difference in the implant diameter, a wide diameter was more advantageous in terms of the torque loss rate.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.341-348
• /
• 2009

Various types of micro cone penetrometers have been developed by using strain gages for the layered soil detection. Strain gages, however, are affected by several factors such as temperature, self heating and lead wire length. In this study, micro cone penetrometers with 3~7mm in diameter, are developed by using FBG sensor to overcome the defects of the strain gage, and compensate the effect of temperature during penetration. In order to verifiy the accuracy and reliability of the developed FBG cone, the cone penetration test is performed on the layered soil. The tip resistance of FBG snesor shows excellent sensitivity, and can detect the interface of the layered soils with higher resolution. In addition, the 3mm micro cone penetrometer which is impossible cone diameter by using strain gages presents much higher sensitivity than the 7mm cone penetrometer. This study suggests that FBG sensor is a useful sensor for manufaturing the ultra small sized cone, and effectively detects the interface of the layered soil.

• Animal cells and systems
• /
• 제4권2호
• /
• pp.131-140
• /
• 2000

The pattern of variations in cone sex ratio and pollen traits such as pollen number and size was examined for two years in populations of red pines In Korea. We evaluated; (1) the relationship between tree size and cone sex ratio, (2) the relationship between year and cone sex ratio, and (3) the relationship between cone sex ratio and pollen traits. Larger trees in height and circumference at breast height produced more male as well as female cones. However, cone sex ratio was independent of these plant sizes. Across the two populations, both female cone numbers per tree and male cone numbers per new shoot increased 2.2 and 1.2 times, respectively, in 1999 compared to 1998, while the yearly pattern of male cone-bearing shoots per tree differed significantly between populations. Thus, cone sex ratio varied significantly between years in one of the two populations. Pollen traits such as the number of pollen grains and diameter did not vary significantly among populations. Pollen diameter and grain numbers per male cone were significantly negatively correlated with the cone sex ratio in two populations and one population, respectively. Trees which stopped female cone production in the first year and those which produced female cones in both years differed in the cone sex ratio and pollen size in the second year. The long duration of one reproductive episode and the potential of masting in red pines emphasize the need to conduct long-term studies on the dynamics of cone production, cone sex ratio, and simultaneous changes in pollen traits in red pines.

• Applied Microscopy
• /
• 제47권4호
• /
• pp.238-241
• /
• 2017

A study on the visual cell and eyeball of the endemic Korean species Liobagrus mediadiposalis was investigated by light and electron microscopes. The retina of a small and 2 mm-diameter round eye was thin, $151.0{\pm}4.0{\mu}m$ and has two visual cells, a single cone and a rod cell. The single cone cells are short and thick, $18.0{\pm}0.9{\mu}m$ in length and $5.1{\pm}0.7{\mu}m$ (n=30) in diameter, while the rod cells are longer and thinner, $54.8{\pm}2.9{\mu}m$ in length and $3.3{\pm}0.6{\mu}m$ in diameter. The cone cells are seen an irregular and random mosaic pattern, and the rod cells are also randomly situated at between cone cells. As a rare phenomenon, such structure is one of characteristics reflecting the eye of a nocturnal and bottom-dwelling freshwater fish. The ultrastructure of visual cells was observed with scanning and transmission electron microscopy, both cone and rod cells are divided into an inner segment with numerous mitochondria and an outer segment with stacks of membrane discs.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.631-642
• /
• 2013

현장지반의 공학적 특성을 파악하기 위한 콘 관입시험(Cone Penetration Test; CPT)은 원지반의 연속적인 강도 특성을 분석하여 다양한 지반변수를 손쉽게 획득할 수 있다는 점에서 널리 활용되고 있으며, 원심모형실험에서도 널리 활용되고 있다. 본 연구에서는 원심모형실험에서 콘선단저항치를 계측할 수 있는 직경이 10 mm인 소형 콘을 개발하고 원심모형실험에서의 적용성을 평가하였다. 개발된 콘으로 4자유도 로봇을 활용하여 원심모형 가속 상태에서 콘 관입시험을 수행하였다. 이 때, 원심가속도 수준을 4회 변화시켜 다양한 유효응력상태에서 콘 관입시험을 실험을 수행하였다. 그 결과, 얕은 관입깊이의 동일한 유효응력에서 콘 선단저항치는 g-level에 영향을 받으며, 선단저항치가 임계 깊이 도달하는 깊이는 g-level과 상대밀도가 커질수록 깊어짐을 확인하였다. 또한, 각 실험에서 임계 깊이에 도달한 선단저항치와 실내실험에서 획득한 지반물성을 이용하여 기존 경험식과 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.777-782
• /
• 2001

In this study, we used In-line orifice mixer for efficient chemicals mixing in water treatment. The method of using In-line orifice mixer has been already proved the improvement of water treatment efficiency. Numerical study was performed using FLUENT, a commercial code, to standard design and production of effective In-line orifice mixer. As variable for exactly standardizing, a proper ratio between an outer diameter of cone and a diameter of pipe, a distance between cone and orifice, a determination of orifice diameter for an optimal mixing, a distance between injection nozzle's position and cone, Numerical study has been performed for optimal standard and analyzed flow field on a basis of turbulent intensity in an orifice downstream.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1031-1039
• /
• 1999

Electrospraying comprises the generation of liquid droplets by applying a high voltage to the surface of a liquid. By monitoring the current and the flow rate it was possible to obtain a stable cone jet mode in a given condition. In this work the liquid contained NaCl particles resolved in distilled water. The NaCl particles increased concentration of the ionized solution and thus increased electrical conductivity of the liquid, which was inversely proportional to the flow rate in the cone jet mode. A number of sprayed droplets were sampled and dried enough, and then the size of NaCl particles were measured. The measured droplet diameter was a little larger than two theoretical diameters, Rayleigh diameter and mobility diameter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.323-330
• /
• 1999

The concepts of mounting a pressuremeter module behind a cone penetrometer was applied in the early 1980s. The pressuremeter module is of 40mm diameter with length / diameter ratio of 10 inflated by nitrogen gas. This cone pressuremeter(CPM) is used to obtain the ground characteristics consisted of mainly silty, clay and sand. Field tests such as SPT, PMT, Vane tests are also carried out to understand the ground condition. Undisturbed samples are obtained to carried out Lah tests. The results of these field and lab tests are presented, discussed in detail, and compared with each others.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2005년도 추계학술발표회 및 workshop
• /
• pp.179-180
• /
• 2005

Non linear finite element analyses were performed in various configurations of stem-ball head. High stresses were found for the cases when the stem tended to penetrate less into the ball head. An upgraded design of the cone may improve the loading of the ball head to resist trauma-like loading more effectively than manipulating the ball diameter. When the surgeon needs to use small ball heads (i.e. 22 mm), the use of zirconia seems to be appropriate also. After simulating a trauma like loading of the materials, it was found that the deepness of the cone to locate the stem is of major importance for the performance of the device. Further work, considering more sizes for the cone design should be performed in order to determine an optimal depth for the cone in relation to the diameter of the ball head. Also the simulation of contacts pairs including polyethylene and CoCr is important for further research.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.199-210
• /
• 1998

The skill that utilizes atomization of the liquid has been widely used in the field of industry and engineering. Though there are dozens of methods to make atomization, the pressure type injection nozzle is frequently used in washing of parts, pastourization and painting because it has relatively simple system. This study is to reveal the characteristics of atomizing formed by three different types of the pressure type injection nozzle. We measured velocity and diameter of droplet to compare and analyze characteristic of each nozzle. In case of velocity, atomization of hollow-cone nozzle is irregular than others and change of radial direction is especially large. Atomization of flat nozzle is nearly uniform. In case of diameter, atomization of hollow-cone nozzle is increased rapidly, as measurement point become more distant from the center of nozzle. Atomization of flat nozzle has the most fixed magnitude. Accordingly, full-cone nozzle can be used irrespective of the form of subject and hollow-cone nozzle is proper to the occasion to spray large and smooth subject. Also, flat nozzle is proper to the occasion to spray a part of subject and long groove.