• 펄프종이기술
• /
• 제45권4호
• /
• pp.65-74
• /
• 2013

In the manufacture of corrugated box, the fibrous raw materials are mainly consisted of recycled papers, such as KOCC(Korean Old Corrugated Container), kraft sack, and AOCC(American Old Corrugated Container). Among these recycled waste paper, the proportion of KOCC is relatively higher than others in fibrous raw materials. Generally, KOCC shows some poor fiber properties and contains hazardous heavy metal sources. Therefore, it is to evaluate the property of recycled paper sources for eco-friendly corrugated box manufacture. In this study, the physical and mechanical properties of 3 kinds of recycled fibers and their mixed stocks were analyzed. The environmental assessment was also evaluated by analyzing the 4 representative heavy metal contents and evaporation residues in waste papers. As the results, KOCC showed the poorest fiber qualities and had the highest heavy metal contents and evaporation residues among the recycled fibers. Finally, the mechanical strength properties were increased by decreasing KOCC proportion of mixed stock conditions. In addition, the heavy metal contents and evaporation residues were also decreased by increasing recycled AOCC and kraft sack proportion.

• 한국식품과학회지
• /
• 제22권4호
• /
• pp.479-485
• /
• 1990

증발 농축공정중 각종 운전 조건의 제어 및 데이터 수집을 자동으로 하기 위하여 제어 및 데이터 수집 부위에 각종 조절기와 센서를 부착하여 컴퓨터 프로그램에 의하여 공정이 진행되도록 하였다. 증발 농축 장치는 원심식 박막증발기인 Centri-Therm$(CT-1B,\;{\alpha}-Laval\;Co.,\;Sweden)$이 이용되었으며 제어 변수로는 증발기의 압력, 급액 속도, 증기의 온도 및 냉각수의 유량 등을 택했다. 그리고 데이타 수집 부위로는 급액 및 농축액의 온도와 농도, 냉각수의 입구 및 출구 온도, 증기의 온도, 증발 온도, 원료 및 농축액의 중량 변화, 응축수의 양 등을 택했다. 운전 프로그램은 PASCAL language를 이용해 작성하였으며 전 공정은 균일하게 콘트롤되었다. 냉각수는 밸브 콘트롤러에 의해 시간당 125kg의 유속으로 흐르도록 하였으며 급액 속도 125/h에서 최대 증발 속도는 41.7kg/h였다.

• 한국결정성장학회지
• /
• 제18권2호
• /
• pp.81-86
• /
• 2008

열증착법(thermal evaporation method)에 의해 ZnO 나노선을 합성하였다. 나노선 합성조건에 따른 구조적 특성을 분석하여 그 합성 메카니즘을 확인하였다. ZnO 나노선 합성 시 기화 온도가 고온일수록 성장속도가 빠르고 $CO/CO_2$ 분압이 역전되는 1000$^{\circ}C$ 이상에서는 그 형태가 크게 변화하고, 성장온도 700$^{\circ}C$ 이상에서 Au 촉매가 그 기능을 하고 있음을 확인하였다. 성장된 ZnO 나노선은 380 nm에서의 blue emission을 나타냄을 확인하였다.

• 대한기계학회논문집B
• /
• 제26권7호
• /
• pp.911-918
• /
• 2002

Evaporation heat transfer coefficients of carbon dioxide($CO_2$), R-22, and R-134a in a horizontal smooth tube were measured and analyzed as a function of heat flux, mass flux, and evaporating temperature. The experiments were carried out by varying heat flux from 10 to 20 $kW/m^2$, mass flux from 170 to 340 $kg/m^2s$, and saturation temperatures of 5 and $10^{\circ}C$. It was found that the heat transfer coefficient of $CO_2$ decreased with a rise of quality due to an earlier liquid-film dryout as compared to R-22 and R-134a. Averaged heat transfer coefficients of $CO_2$ were 22-63% higher than those of R-22 and R-134a at all test conditions. The effects of mass flux and heat flux on averaged heat transfer coefficients were much greater in $CO_2$ than in R-22 and R-134a. When comparing $CO_2$ test results with the correlations in the literature, the existing models yielded large deviations at medium and high qualities. Therefore, a generalized correlation for $CO_2$evaporation heat transfer needs to be developed by including the effects of dryout phenomenon.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.27-34
• /
• 2001

A new functionally gradient metal coating method using an atomic mixing technique was developed. In this work the effect of silver atomic mixing on the tribological characteristics of silver$.$ films. has been investigated experimentally. Atomic mixing was implemented by using the, bombardment .of accelerated Ar ions during the thermal evaporation coating process of silver films. Experiments were performed in dry conditions using a ball-on-disk test rig at a load range of 19.6 mN - 17.64 N and a sliding velocity of 20 mm/sec. Results showed that the life of functionally gradient silver coating was enhanced about 100 times more than that of thermally evaporated silver coating and 2 times more than that of IBAD silver coating. The functionally gradient. film also showed low friction and wear compared to those of the evaporated silver and

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권4호
• /
• pp.523-532
• /
• 1999

This study is aimed to obtain fundamental knowledge of pulse laser welding phenomena the authors investigated the structure and composition of evaporated particles of Al alloys in air and in the Ar atmosphere during pulsed laser welding. The ultra-fine particles of 5 to 100nm diameter in a globular or irregular shape were formed in laser-induced plasma and the main structure was $MgAl_2O_4$ The composition of particles was ifferent depending on the power density of a laser beam; namely under the low power density conditions magnesium was predominant in the parti-cles while aluminium content increased with an increase in the power density. These results were attributed to evaporation phenomena of metals with different boiling points and latent heats of vaporization. On the other hand the number density of laser-induced plasma species was obtained by Saha's equation. it was confirmed that the number density depends upon the plasma tempera-ture and total pressures.

• 한국진공학회지
• /
• 제9권1호
• /
• pp.60-68
• /
• 2000

The optical constants ($E_g^d$, n, K) of the polycrystalline CdSe thin films deposited on the glass substrate by the electron-beam evaporation technique are determined over 400~2,500 nm photon wavelengths. In order to explain the variation of the optical contents with film thickness and substrate temperatures, the surface microstructural parameter are investigated by AFM (atomic forced microscope( images for the films deposited by different growth conditions. It is shown that the variations of optical constants are close related to changes of the surface morphology of the CdSe thin films. The decrease in the band gap with film thickness is connected with quantum size effects due to increase of the grain size. The refractive index of CdSe films decrease with increasing the grain size of the films, and the dispersion of the refractive index followed a single oscillator model according to the Sellmeier formulation.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.707-714
• /
• 1999

형광등으로 사용되는 전기 에너지의 40%를 절약할 수 있는 방법으로서 그 반사값을 특수 은 반사박막으로 처리하여 고효율 및 내구성을 갖는 기술이 최근에 알려지고 있다. 이 박막들은 sputtering법을 이용한 것으로 주로 미국에서 생산되어지고 있다. 한편. evaporation 법으로 제작된 은 박막들은 일반적으로 반사효율에는 별문제가 없으나 부착력이 떨어지는 단점이 있다. 우리는 수년간 polyester를 기판으로 하고 몇가지 PVB 방법을 동원하여 고 반사율 및 부착력을 갖는 은경 박막을 확보하기 위해 연구를 해왔다. 그 결과, evaporation 법으로 제작된 은 박막은 96.4%의 반사율을 보이나 부착력은 $12 Kg/\textrm{cm}^2$에 불과함을 확인하였고. sputter 법으로 제작한 시편들의 반사율은 96.3 %로 비슷하였으나 부착력이 /$20 Kg\textrm{cm}^2$로 거의 두배로 뛰어올라 sputter법의 공정조건이 그 결과박막들의 물리적 특성에 미치는 긍정적 영향을 확인할 수 있었다. X-선 회절 분석결과 sputter의 경우에 (111)면이 우선성장함을 알 수 있었고, 시편의 단면으로부터 관찰된 치밀한 columnar 구조가 부착력을 향상시키고 있음이 확인되었다.

• 오토저널
• /
• 제7권2호
• /
• pp.55-63
• /
• 1985

This study is focused on deposition process leading to inefficiency and hot corrosion in fossil fuel-fired furnaces and engines. An improved understanding of the coupled thermodynamics, kinetics, and transport processes governing the deposition rate of inorganic oxides and salts from hot gases containing these compounds can suggest more efficient test strategies and control measures. Accordingly, an optical re-evaporation method for accurately measuring the growth rate of deposits under laboratory burner conditions has been developed. To demonstrate the technique and provide data suitable for theoretical model development, a deliberately simple chemical system and target geometry are used. Potassium sulfate(K$_{2}$SO$_{4}$)is introduced into a premixed propane-air flat flame at atmospheric pressure. The growth rate of $K_{2}$SO$_{4}$ on an electrically heated Pt ribbon is measured by re-evaporation technique.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.97-100
• /
• 2014

The combustion and emission characteristics of propane and n-butane which are the main components of LPG were compared with gasoline. The experiment was performed in a stratified DISI engine under lean combustion conditions. Mixtures of propane and n-butane wre more homogeneous because propane and n-butane have better evaporation characteristics. As a result, combustion speeds of n-butane and propane were slower, and emission levels of NOx and PM were lower. However, in spite of better evaporation, PM from propane was higher.