• Journal of Welding and Joining
• /
• 제17권3호
• /
• pp.90-95
• /
• 1999

The increase in high speed, multi-function and high I/O pin semiconductor devices highly demands high pin count, very thin, and high density packages. BGA is one of the solutions, but the package has demerits in package reliability, surface mounting problems due to the PCB warpage and solder joint crack related with TCE mismatch between the materials. On this study to verify the thermal fatigue lifetime of the solder joint FEM and experiments were performed after surface mounting BGA with different solder composition and reliability conditions. FEM showed optimum composition of Ag3.2-Sn96.5 and under the composition minimum creep deformation of the solder joint was calculated, and the thermal fatigue lifetime was improved. In view of temperature cycle condition, the conditions of $-65^{\circ}C$to $150^{\circ}C$ showed minimum lifetime and t was 1/3 of $0^{\circ}C$ to $125^{\circ}C$ condition. Test board was prepared and solder joint crack was verified. Until 1000cycle on soder joint crack was observed.

• 한국태양에너지학회 논문집
• /
• 제28권2호
• /
• pp.64-69
• /
• 2008

As the grid-connected photovoltaic power conditioning systems (PVPCS) are installed in many residential areas, these have raised potential problems of network protection on electrical power system. One of the numerous problems is an Islanding phenomenon. There has been an argument that it may be a non-issue in practice because the probability of islanding is extremely low. However, there are three counter-arguments: First, the low probability of islanding is based on the assumption of 100% power matching between the PVPCS and the islanded local loads. In fact, an islanding can be easily formed even without 100% power matching (the power mismatch could be up to 30% if only traditional protections are used, e.g. under/over voltage/frequency). The 30% power-mismatch condition will drastically increase the islanding probability. Second, even with a larger power mismatch, the time for voltage or frequency to deviate sufficiently to cause a trip, plus the time required to execute a trip (particularly if conventional switchgear is required to operate), can easily be greater than the typical re-close time on the distribution circuit. Third, the low-probability argument is based on the study of PVPCS. Especially, if the output power of PVPCS equals to power consumption of local loads, it is very difficult for the PVPCS to sustain the voltage and frequency in an islanding. Unintentional islanding of PVPCS may result in power-quality issues, interference to grid-protection devices, equipment damage, and even personnel safety hazards. Therefore the verification of anti-islanding performance is strongly needed. In this paper, improved RPV method is proposed through considering power quality and anti-islanding capacity of grid-connected single-phase PVPCS in IEEE Std 1547 ("Standard for Interconnecting Distributed Resources to Electric Power Systems"). And the simulation results are verified.

• 대한음성학회지:말소리
• /
• 제52호
• /
• pp.145-160
• /
• 2004

In this paper, a new noise compensation method based on the eigenvoice framework in feature space is proposed to reduce the mismatch between training and testing environments. The difference between clean and noisy environments is represented by the linear combination of K eigenvectors that represent the variation among environments. In the proposed method, the performance improvement of speech recognition systems is largely affected by how to construct the noisy models and the bias vector set. In this paper, two methods, the one based on MAP adaptation method and the other using stereo DB, are proposed to construct the noisy models. In experiments using Aurora 2 DB, we obtained 44.86% relative improvement with eigen-environment method in comparison with baseline system. Especially, in clean condition training mode, our proposed method yielded 66.74% relative improvement, which is better performance than several methods previously proposed in Aurora project.

• 정보보호학회지
• /
• 제12권2호
• /
• pp.41-49
• /
• 2002

음성 인식 기술과 뿌리를 공유하는 화자 인식 기술은 지난 수십 년간의 연구결과로 괄목할 만한 진보가 이루어졌으며 최근에는 일반화될 수 있으리라는 기대를 가지도록 하기에 충분했다. 하지만 이러한 기술이 실제 환경에 적용되었을 때, 발성 환경을 제어할 수 없으며 그 결과 훈련 환경과는 다른 환경에서 발성된 음성을 인식 해야하는 이른바 '불일치 조건(mismatch condition)' 현상이 발생하게된다. 초기에는 이 현상을 극복하기 위해 잡음 자체를 모델링하고 제거함으로써 훈련과 인식 환경의 차이를 일정하게 정규화(normalization)해주는 연구가 진행되었다. 하지만 최근에는 잡음에 의한 왜곡의 모델이 복잡하고 실제 인식 성능에 직접적으로 나타나지 않는 문제점을 추가로 극복하기 위해, 훈련과 인식 환경의 차이를 보상해주는(compensation) 연구가 활발히 진행되고 있다. 본 논문에서는 기본적인 화자인식기술과 함께 성능저하를 일으키는 불일치 요인들 및 그것들을 극복하기 위한 기술들을 소개하고자 한다.

• Structural Engineering and Mechanics
• /
• 제37권5호
• /
• pp.529-542
• /
• 2011

Three dimensional solutions for free vibrations analysis of functionally graded fiber reinforced cylindrical panel are presented, using differential quadrature method (DQM). The orthotropic panel is simply supported at the edges and is assumed to have an arbitrary variation of reinforcement volume fraction in the radial direction. Suitable displacement functions that identically satisfy the simply supported boundary condition are used to reduce the equilibrium equations to a set of coupled ordinary differential equations with variable coefficients, which can be solved by differential quadrature method to obtain natural frequencies. The main contribution of this work is presenting useful results for continuous grading of fiber reinforcement in the thickness direction of a cylindrical panel and comparison with similar discrete laminate composite ones. Results indicate that significant improvement is found in natural frequency of a functionally graded fiber reinforced composite panel due to the reduction in spatial mismatch of material properties.

• The Journal of the Acoustical Society of Korea
• /
• 제22권2E호
• /
• pp.62-68
• /
• 2003

This paper addresses a novel noise-compensation scheme to solve the mismatch problem between training and testing condition for the automatic speech recognition (ASR) system, specifically in car environment. The conventional spectral subtraction schemes rely on the signal-to-noise ratio (SNR) such that attenuation is imposed on that part of the spectrum that appears to have low SNR, and accentuation is made on that part of high SNR. However, these schemes are based on the postulation that the power spectrum of noise is in general at the lower level in magnitude than that of speech. Therefore, while such postulation is adequate for high SNR environment, it is grossly inadequate for low SNR scenarios such as that of car environment. This paper proposes an efficient spectral subtraction scheme focused specifically to low SNR noisy environment by extracting harmonics distinctively in speech spectrum. Representative experiments confirm the superior performance of the proposed method over conventional methods. The experiments are conducted using car noise-corrupted utterances of Aurora2 corpus.

• 한국조리학회지
• /
• 제14권4호
• /
• pp.27-40
• /
• 2008

This study focused on retraining programs for cuisiniers and drawing attention to the necessity of retraining and the new method of retraining for cuisiniers as a professional in a knowledge based society. Case study review and interviews followed by thorough review of related literatures were taken place to give suggestions and comments for the improvement of job performance enhance training for cuisiniers. Interviews were done with current participants and institutional trainers in March, 2008. Result from the interviews showed that retraining was really necessary. It was concluded that various retraining programs organized and developed by an association could be the solution. Methods of retraining can take formats of distance learning, classroom learning, and blended learning. However, working condition for most cuisiniers at present would allow them to squeeze some time off to attend higher education and most restaurant companies are not big enough to offer systematic job training on site or not stable enough to arrange replacement workers. It is therefore suggested to adopt a blended learning method and further study on this subject is highly recommended.

• Journal of Genetic Medicine
• /
• 제13권1호
• /
• pp.55-58
• /
• 2016

Pseudomyxoma peritonei (PMP) is a rare tumor that usually originates in the appendix, but a small number of cases originate in the ovary. Lynch syndrome (LS) is an autosomal dominant hereditary condition that increases the risk of cancer, particularly in the colon and endometrium. Mutations in the mismatch repair genes (MSH2, MLH1, MSH6, and PMS2) increase the risk of LS. Reported PMP cases with hereditary gene mutations of unknown significance are also rare. Here, we investigated a PMP patient and her family members, who have an MSH2 variant of unknown significance. Physicians have an important role in counseling, management, and surveillance based on genetics and pathogenicity.

• 대한전기학회논문지
• /
• 제37권5호
• /
• pp.319-326
• /
• 1988

In the presence of unmodeled dynamics, the robustness of adaptive pole assignment control using new pseudo-plant is presented. The pseudo-plant proposed by Donati et al. is modified as the gain of low pass filter can be set from zero to one. This modified pseudo-plant results in the reduction of modeling error. It is shown that not only this approach is insensitive to input frequency but also it improves the conic condition developed by Ortega et al. which is required to assure stability of adaptive control system despite the model-plant mismatch. A simple method to compensate the tracking error due to the use of pseudo-plant is considered.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.171-174
• /
• 2002

In this study, we proposed a specification which is able to estimate tile uncertainty more easily and quickly and also able to maintain a confidence level when measuring tile magnitude and phase of 1-port and 2-port transmission.reflection coefficient using a VNA and attached coaxial cable probes. This proposed specification is available when it needs extra special condition of uncertainty estimation and when there is no additional standard equipment like as beadless airline or mismatch standard at the measurement institute. We compared and examined this proposed uncertainty estimation method with recommended EA specification and Agilent specification. As a result, we think that this proposed specification can be used as a reference for uncertainty estimation and calculation of VNA system, that is, a reference based on the IS0/1EC 17025 requirements.