• Journal of Integrative Natural Science
• /
• v.4 no.4
• /
• pp.278-281
• /
• 2011

We discuss an application of 'restrictions on the entries of the maps in the minimal free resolution' and '$SC_r$-condition of modules', and give an alternative proof of the following result of Foxby: Let M be a finitely generated module of dimension over a Noetherian local ring (A,m). Suppose that $\hat{A}$ has no embedded primes. If A is not Gorenstein, then ${\mu}_i(m,A){\geq}2$ for all i ${\geq}$ dimA.

• Journal of the Korean Society of Combustion
• /
• v.9 no.2
• /
• pp.1-9
• /
• 2004

Activation energy asymptotics (AEA) for Linan#s diffusion-flame regime is revisited in this paper. The main purpose of the paper is to carefully re-examine each AEA analysis step in order to clarify the some concepts that are often misunderstood among the ordinary practitioners of the AEA. Particular attention is focused on the different AEA regimes arising from the double limit of large Zel#dovich and Damkohler numbers. In addition, the expansion procedures are shown in detail and the method that the turning point condition, commonly known as the Linan#s extinction condition, is found is explained.

• KSBB Journal
• /
• v.6 no.4
• /
• pp.351-361
• /
• 1991

This study is on the investigation of hydrogen production and substrate removal by photosynthetic bacteria. After using of Rhodospillum rubrum KS-301 and IFO 3986, which are photosynthetic bacteria as strains, R. rubrum KS-301 was turned out a better strain. And result of experiment in which glucose and sodium lactate, components of wastewater, were used limiting substrates, showed that the productivity of hydrogen was indifferent with the kind of substrates. In batch experiments using free cells and immobilized whole cells, the decrease in hydrogen productivity was observed in the latter case. From the results of these experiments, specific growth rate of cells, specific utilization rate of glucose, and specific production rate of hydrogen were calculated. And each rate was expressed in the form of Monod equation of which parameters were estimated. Also the optimum condition of hydrogen production for free cells was $30^{\circ}C$, pH 7, and 12,000 Lux, and the optimum immobilized condition was as follows: initial immobilized cell concentration 1.0g/L, sodium alginate concentration 2% and light intensity 12,000 Lux.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.1
• /
• pp.21-32
• /
• 1988

An experimental study was carried out to identify the fatigue fracture behavior of steel for merchant ships. The bending and shear loads were applied simultaneously on the specimens to simulate of real load condition for a ship. The effects of the stress intensity factor under mode I with mode II loading condition on the initiation and the propagation of a crack were investigated, with particular emphasis on mode II. When the $K_{II}$ stress intensity factor in mode II was applied under mode I loading condition, the propagation behavior of a crack is to be affected mainly by the anisotropic characteristic of materials.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.654-660
• /
• 1991

Stabilized Zirconia (3 mol % Yttria, 3Y-TZP) was joined with intermetallic compound NiTi which has similar thermal expansion coefficient. The optimum bonding condition was determined by the Taguchi Method. Under the optimum bonding condition, the 4-point bending strength was as high as 400 MPa. bonding interfaces were examined by optical microscope, SEM, and TEM; reaction products were identified by XRD and TEM, The relationship between products and strength was examined.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.508-513
• /
• 1997

One of the moot important constants to be Installed In COLSS, a monitoring system in CE typed reactors, is ROPM which would limit the operating space. This static ROPM was calculated from digital transient analysis assuming that every design basis transient was initiated from the most severe initial condition combination (LCO). Once It could be assured that core condition would not be located at none other than LCO, this static ROPM could be replaced with dynamic ROPM calculated at that condition and the dynamic ROPM would be definitely less than the static ROPM. In order to do, It must be required to calculate the transient discrete sensitivity parameters and parameters change distribution. The purpose of this report is just to propose the enlargement method for thermal margin.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.73-80
• /
• 2006

This study compared cell expansion and colony forming ability in human cord blood stem cells cultured ex vivo with two kinds of cytokine combinations, two kinds of media, presence or absence of fetal bovine serum (FBS) and two or three dimensional (2D or 3D) culture environments. Purified $CD34^+$ cells were cultured in the IMDM (Iscove's Modified Dulbecco's Medium) and SFM (Serum Free Medium) containing a cytokine cocktail-I (coc-I) (EPO, GMCSF, SCF, and IL-3) or a cytokine cocktail-II (coc-II) (TPO, G-CSF, SCF, IL-6, and Flt3/Flk-2 ligand) with or without FBS. Generally, higher cellular and clonogenic expansion were observed in the coc-I cytokine condition, compared to coc-II cytokine condition. 3D (Methocult) and 2D (IMDM + coc-I + FBS) conditions gave the greatest cell ($2,258{\pm}456$ fold) and CFU (BFU-E: $652{\pm}19$, CFU-GM: $520{\pm}58$, CFU-GEMM: $339{\pm}100$ fold) expansions, respectively. In aspect of medium, IMDM was better than SFM, except for coc-II condition without FBS. In conclusion, 'IMDM + coc-I + FBS' and 'IMDM + coc-I' were the best CFU expansions on the occasion of all culture conditions. FBS and 2D conditions had affirmative effect on CFU expansion, generally. These data might provide a variety of notions about ex vivo expansion of hematopoietic stem cells.

• Honam Mathematical Journal
• /
• v.27 no.2
• /
• pp.233-241
• /
• 2005

A sequence $\{f_i\}^{\infty}_{i=1}$ in a Hilbert space H is said to be exponentially localized with respect to a Riesz basis $\{g_i\}^{\infty}_{i=1}$ for H if there exist positive constants r < 1 and C such that for all i, $j{\in}N$, ${\mid}{\mid}{\leq}Cr^{{\mid}i-j{\mid}}$ and ${\mid}{\mid}{\leq}Cr^{{\mid}i-j{\mid}}$ where $\{{\tilde{g}}_i\}^{\infty}_{i=1}$ is the dual basis of $\{g_i\}^{\infty}_{i=1}$. It can be shown that such sequence is always a Bessel sequence. We present an additional condition which guarantees that $\{f_i\}^{\infty}_{i=1}$ is a frame for H.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.10
• /
• pp.1377-1384
• /
• 2003

An analysis has been performed for active thermal control of the KOMPSAT monopropellant rocket engine assembly, i.e., dual thruster module(DTM). The main efforts of this work have been directed at determining proper heater sizes for propellant valves and catalyst beds necessary to maintain their temperatures within specified temperature ranges under KOMPSAT environment and operational conditions. The TAS incorporated with TRASYS thermal radiation analyzer was used to establish a complete heat transfer model which allows to predict the DTM temperature as a function of time. The thermal analysis has been performed in transient mode to verify the appropriate power for catalyst bed heaters necessary to increase catalyst bed temperature to the required value within a specified period of time. Similar analysis has been executed to validate the heater power for the thermostatically controlled primary and redundant heater circuits used to prevent hydrazine freezing, i.e., single fault. Moreover the effect of the radiative property of thermal control coating of heat shield was examined. Thruster firing condition was also simulated for the heat soakback condition. As a consequence, all thermal analysis results for DTM satisfactorily met the thermal requirements for the KOMPSAT DTM under the worst case average voltage, i.e. 25 volt.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.2
• /
• pp.167-176
• /
• 1999

The study about quantitative or qualitative analysis of object using digital image is being progressed actively with the development of the image medium and image process technique. But, it is very high that the dependency about image acquisition system of high resolution for image analysis of high accuracy and it is a equipment of high-price. In this study, I extracted the optimum condition of image enhancement by analyzing and enhancing the multiple images which were acquired by system of low-price. And I carried out the analysis of 3D accuracy by being applied the optimum condition of image enhancement. In the result of analysis of average 3D positioning error using law image and enhanced image which is acquired by applying the optimum condition of image enhancement, I could obtain the progressed accuracy about 10％ on the enhanced image.