• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.319-324
• /
• 2004

With a PMS, a maintenance plan should be drawn up after surface conditions are precisely examined and analyzed. The majority of the present PMSs are run by the fact that experts first examine surface conditions on sites, and then enter results into systems. However, considering the actual circumstances of the present time and an increase in paved road hereafter, it is inefficient that experts examine the whole paved roads in person and long-lasting PMSs can not be kept up. Therefore, in the study digital photogrammetry was used to examine asphalt concrete pavements. In a consequence, it was found that if databases are implemented in the future with quality digital image information accumulated from studies on roads, they will be able to provide the field of pavement management system with a large amount of information and data.

• 대한토목학회논문집
• /
• 제38권3호
• /
• pp.467-475
• /
• 2018

지자체 도로예산 절감을 위해 소규모 지역도로의 통행환경을 고려한 소규모 지역도로 포장상태 평가 기준을 제시하고자 하였다. 지방 지자체에서 관리하는 지역도로의 경우 설계속도가 낮고 일정하지 않으며 중차량 통행량이 작아 비교적 중요도가 떨어지는 구간이다. 일반적으로 포장상태 조사에는 조사장비를 이용하나 고가의 운영비가 소요되어 소규모 지역도로 적용에는 효율성 문제가 발생한다. 본 연구에서는 소규모 지역도로에 적합한 새로운 포장상태 평가지수를 제시하였다. 소규모 지역도로의 포장상태 평가는 제시된 평가지수에 따라 3등급으로 구분하였으며, 전문가 설문조사를 통해 타당성을 검토하였다. 제시된 평가지수는 포장상태 설문조사 결과와 $R^2$가 0.88로 매우 높은 상관성이 높은 것으로 나타났다. 제한된 조건에서 육안 균열조사를 통해 산출된 포장상태평가지수는 소규모 지역도로에 활용이 가능하다. 또한 보다 경제적인 포장상태평가방법으로 지역도로 관리뿐 아니라 도로관리 예산절감에도 효과가 있을 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.442-445
• /
• 2011

Concrete track on the new railway lines of the existing roads are built on high ground, or less than 400m radius of the sharp curve sectors will occur. sharp curve sectors the rail and wheel friction, stick-slip due to the band of 1,000Hz or squeal noise occurs from the increase in civil complaints about noise is a real situation. In this study, discussed in previous studies, noise measurements for each radius of concrete track and frequency analysis, followed by the radius of the curve in order to investigate vibration characteristics of urban railway sector sharp curve radius less than 400m and 400m ~ 1,000 m further to the point selected track components(rails, sleepers, ballast) according to the vibration measurements and analysis of the frequency characteristics and the results were derived.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.29-30
• /
• 2018

Recent impervious pavements on roads and sidewalks cause rainwater to not penetrate into the ground, deplete groundwater, or flood the rivers, causing urban flood damage. In order to solve these problems, the amount of installed pitcher block is increasing, but the existing pitcher block is made with cement base and causes many problems. In the cement permeable block, the efflorescene phenomenon occurs due to the acid component, and the pore of the permeable block is clogged and the permeability is lost. As a result, the service life of the pitcher block is shortened and the replacement period is shortened. The purpose of this study is to analyze the basic properties of polymer concrete by replacing cement with polymer in order to solve the problem of cement - based concrete permeable block.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.277-282
• /
• 1999

Recently , the use of steel fibers has been increased in flexural members and beams of concrete structures ; such as bridge decks, highway roads, runway of airport , buildings , ete.. An experimental investigation of the shear behavior of high-strength reinforced concrete beams using input steel fiber was conducted. However only a few experimental tests have been carried out under static loading . The static test was carried out to measure the ultimate load, the initial load of flexural and diagonal cracking , crack patters, fracture modes. The load versus strain and load versus deflection relation were obtained from the static test.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.79-80
• /
• 2022

A method for repairing cracks using low-viscosity resins has been proposed as a construction method that can quickly repair roads from deterioration. However, when the viscosity of the epoxy resin is high, there is a limit in that it is difficult for the material to penetrate into microcracks and cracks in the concrete top plate. In this study, an epoxy thin-layer pavement repair method was developed using low-viscosity PMMA (Poly methyl methacrylate) to repair microcracks on the pavement surface and pavement layer and reinforce the pavement surface. Materials necessary for the thin-layer packaging method were developed, and performance was evaluated to meet the epoxy binder quality standards. As a result, all materials met the required performance.

• International Journal of Concrete Structures and Materials
• /
• 제2권2호
• /
• pp.91-98
• /
• 2008

Curved bridges are important components of a highway transportation network for connecting local roads and highways, but very few data have been collected in terms of their field performance. This paper presents two-years monitoring and system identification results of a curved concrete box-girder bridge, the West St. On-Ramp, under ambient traffic excitations. The authors permanently installed accelerometers on the bridge from the beginning of the bridge life. From the ambient vibration data sets collected over the two years, the element stiffness correction factors for the columns, the girder, and boundary springs were identified using the back-propagation neural network. The results showed that the element stiffness values were nearly 10% different from the initial design values. It was also observed that the traffic conditions heavily influence the dynamic characteristics of this curved bridge. Furthermore, a probability distribution model of the element stiffness was established for long-term monitoring and analysis of the bridge stiffness change.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.47-53
• /
• 2004

Permeable polymer concrete can be applied to roads, sidewalks, river embankments, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using blast furnace slag powder and stone dust of industrial by-products as fillers for Eco-permeable polymer concrete. Different mix proportions were tried to find an optimum mix proportion of the Eco­permeable polymer concrete. The tests were carried out at $20{\pm}1^{circ}C$ and $60{\pm}2\%$ relative humidity. At 7 days of curing, unit weight, coefficient of permeability, dynamic modulus of elasticity, compressive, flexural and splitting tensile strengths ranged between $1,821{\~}1,955 kg/m^{3}$, $0.056{\~}0.081\;cm/s$, $114{\times}0^{2}{\~}157{\times}10^{2}\;MPa,\;17.6{\~}24.7\;MPa,\;5.98{\~}7.94\;MPa\;and\;3.43{\~}4.70\;MPa$, respectively. It was concluded that the blast furnace slag powder and stone dust can be used in the Eco-permeable polymer concrete.

• 한국농공학회지
• /
• 제42권
• /
• pp.85-91
• /
• 2000

Dwindling supplies and increasing costs of conventional highway materials used in road construction as well as concerns over shrinking landfill spaces prompt researchers to investigate the use of waste products, such as fly ash, as substitute materials in highway construction. The highway industry is capable of utilizing waste materials in large quantities if their effect on pavement performance proves to be technically, economically and environmentally satisfactory. This research examines the effects of fly ash when used as partial replacement of aggregate in asphaltic concrete mixtures. And measuring the effect of fly ash on bulk specific gravity, air void, indirect tensile strength (ITS) under dry and wet conditioning as well as the tensile strength ratio (TSR) of asphaltic concrete mixture. The results indicated that asphaltic concrete mixtures containing 2% and 5% fly ash produced about the same TSR value as control mixture. And all of the mixtures met the minimum ITS and TSR requirements established by the South Carolina Department of Transportation (SC DOT) for Type 1A surface courses. At this point and with this limited study, these asphaltic concrete mixtures is recommended in several applications such as parking lot, secondary roads and driveways.

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.373-385
• /
• 2016

During recent years researchers performed large effort to increase the service life and asphalt stability of the roads against traffic loads and weather conditions. Investigations carried out in various aspects such as changes in gradation, addition of various additives, changes in asphalt textures and etc. The objective of this research is to evaluate the advantages of adding recycled glass powder (RGP), Crumb Rubber (CR), styrene-butadiene rubber (SBR) and styrene butadiene styrene (SBS) to base bitumen with grade of 60/70 for modification of asphalt concrete. Initial studies conducted for determining the physical properties of bitumen and modifiers. A series of asphalt concrete samples made using various combinations of RGP, CR, SBR, SBS and base bitumen. All samples tested using Indirect Tensile Strength (ITS), Indirect Tensile Strength Modulus (ITSM) and Marshall Stability Tests. The new data compared with the results of control samples. The results showed that replacing RGP with known polymers improved ITS and ITSM results considerably. Also the Marshall Stability of modified mixtures using RGP is more than what is found for the base blend. Ultimately, the new RGP modifier had a huge impact on pavement performance and results in high flexibility which can be concluded as high service life for the new modified asphalt concrete.