• 한국전산구조공학회논문집
• /
• 제31권5호
• /
• pp.251-258
• /
• 2018

도심지나 문화재가 인접한 지역 등의 소음, 진동 등 기존 발파해체 공법이 제한적인 조건에서 사용할 수 있는 구조물 해체공법으로 무소음화학팽창제(soundless chemical demolition agent, SCDA)를 이용한 공법이 있다. 그러나 SCDA의 사용에 대한 기준이나 가이드라인에 참고될 만한 연구는 미미한 실정이다. 이 연구에서는 실내실험을 수행하여 강관의 길이, 외부수분차단, 수화열 발산 등의 다양한 조건에 따른 SCDA의 팽창압 발현 특성을 확인하였다. 또한 SCDA의 최소요구팽창압 예측을 위한 해석모델(자유단 1면, 고정단 3면의 직사각형 모델)을 개발하고 주요변수해석(홀 간 거리, 콘크리트 압축강도)을 수행하였다. 이 연구의 해석결과를 활용하여 자유단으로부터 콘크리트 구조물의 박락을 효과적으로 유도할 수 있을 것으로 판단된다.

• Advances in concrete construction
• /
• 제6권3호
• /
• pp.245-268
• /
• 2018

The numerical investigations have been carried out on deep beam with opening subjected to static monotonic loading to demonstrate the accuracy and effectiveness of the finite element based numerical models. The simulations were carried out through finite element program ABAQUS/CAE and the results thus obtained were validated with the experiments available in literature. Six simply supported beams were modelled with two square openings of 200 and 250 mm sides considered as opening at centre, top and bottom of the beam. In order to define the material behaviour of concrete and reinforcing steel bar the Concrete Damaged Plasticity model and Johnson-Cook material parameters available in literature were employed. The numerical results were compared with the experiments in terms of ultimate failure load, displacement and von-Mises stresses. In addition to that, seventeen beams were simulated under static loading for studying the effect of opening location, size and shape of the opening and depth, span and shear span to depth ratio of the deep beam. In general, the numerical results accurately predicted the pattern of deformation and displacement and found in good agreement with the experiments. It was concluded that the structural response of deep beam was primarily dependent on the degree of interruption of the natural load path. An increase in opening size from 200 to 250 mm size resulted in an average shear strength reduction of 35%. The deep beams having circular openings undergo lesser deflection and thus they are preferable than square openings. An increase in depth from 500 mm to 550 mm resulted in 78% reduced deflection.

• Structural Engineering and Mechanics
• /
• 제72권5호
• /
• pp.631-642
• /
• 2019

The objective of the present study is to examine the flexural behavior of two-span post-tensioned lightweight aggregate concrete (LWAC) beams using unbonded tendons and the reliability of the design provisions of ACI 318-14 for such beams. The parameters investigated were the effective prestress and loading type, including the symmetrical top one-point, two third-point, and analogous uniform loading systems. The unbonded prestressing three-wire strands were arranged with a harped profile of variable eccentricity. The total length of the beam, measured between both strand anchorages, was 11000 mm. The test results were compared with those compiled from simply supported LWAC one-way members, wherever possible. The ultimate load capacity of the present beam specimens was evaluated by the collapse mechanism of the plasticity theorem and the nominal section moment strength calculated following the provision of the ACI 318-14. The test results showed that the two-span post-tensioned LWAC beams had lower stress increase (Δf_ps) in the unbonded tendons than the simply supported LWAC beams with a similar reinforcement index. The effect of the loading type on Δf_ps and displacement ductility was less significant for two-span beams than for the comparable simply supported beams. The design equations for Δf_ps and Δf_ps proposed by ACI 318-14 and Harajli are conservative for the present two-span post-tensioned LWAC beams, although the safety decreases for the two-span beam, compared to the ratios between experiments and predictions obtained from simply supported beams.

• 콘크리트학회논문집
• /
• 제17권3호
• /
• pp.343-351
• /
• 2005

본 논문에서는 FRP 외부 부착공법으로 전단 보강된 철근콘크리트 보의 전단강도 예측 모델을 제안하였다. 제안된 모델은 전단 균열각과 전단 경간비와 같은 주요한 설계인자를 고려할 수 있도록 하였다. 제안된 모델의 주요고려사항은 ]nP로 전단 보강된 보의 일반적 파괴 형태인 부착파괴에 대한 전단력 산정이다. 또한 제안된 모델은 기존의 수정 소성이론에 근거한 crack sliding model을 이용하였으며, 아치작용계수를 도입함으로써, 전단 경간비의 영향을 최소화하였다. 최종적으로 본 전단강도 예측 모델을 적용한 해석결과를 실험결과와 비교$\cdot$검증하였으며, 본 제안된 예측 모델이 실험결과와 상당히 일치하는 것을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.133-136
• /
• 2008

소성학적 개념을 반영하고 있는 휨모멘트 재분배 문제는 한계 상태 설계(Limit State Design)의 근간으로서, 지점부에서의 부모멘트에 대한 철근량 조정을 통한 부재강도에 대한 합리적인 평가를 가능하게 하여 오랫동안 설계 엔지니어와 연구자들에게 흥미의 대상이 되어 왔다. 많은 연구 결과, 재분배되는 휨모멘트량은 소성힌지의 회전각과 같이 구조물의 연성도와 밀접한 관계가 있으며, 실험에 따른 많은 제약으로 인한 신뢰성 있는 실험 결과의 확보에 많은 어려움이 있음을 알 수 있다. 이에, 철근콘크리트 구조물의 연성 능력에 대한 간접적인 평가 방안을 위한 연구가 진행되고 있는 실정이다. 현재각 설계기준에서는 앞서의 연구 결과 등을 바탕으로 연성의 대략적인 측정값 따른 휨모멘트의 재분배의 크기를 제한하고 있으며, 이에 대한 많은 연구 결과, 이러한 경험에 근거한 설계식들은 구조물의 연성평가에 상당한 보수적인 결과를 취하고 있음을 알 수 있다. 이 연구에서는, 이러한 결과들과 함께 현재까지 모멘트 재분배에 관한 각 설계기준들에 대한 비교 분석 및 그 동안 저자 등에 의한 연구 결과들을 바탕으로, 철근콘크리트 연속보에 대한 보다 합리적인 강도 평가 및 허용모 멘트 재분배 방안 마련을 위한 기초자료를 제시하고자 한다.

• KCI Concrete Journal
• /
• 제12권1호
• /
• pp.57-68
• /
• 2000

The effect of structure size on the nominal strength of unidirectional fiber-polymer composites, failing by propagation of a kink band with fiber microbuckling, is analyzed experimentally and theoretically. Tests of novel geometrically similar carbon-PEEK specimens, with notches slanted so as to lead to a pure kink band (without shear or splitting cracks), are conducted. The specimens are rectangular strips of widths 15.875, 31.75. and 63.5 mm (0.625, 1.25 and 2.5 in and gage lengths 39.7, 79.375 and 158.75 mm (1.563, 3.125 and 6.25 in.). They reveal the existence of a strong (deterministic. non-statistical) size effect. The doubly logarithmic plot of the nominal strength (load divided by size and thickness) versus the characteristic size agrees with the approximate size effect law proposed for quasibrittle failures in 1983 by Bazant This law represents a gradual transition from a horizontal asymptote, representing the case of no size effect (characteristic of plasticity or strength criteria), to an asymptote of slope -1/2 (characteristic of linear elastic fracture mechanics. LEFM) . The size effect law for notched specimens permits easy identification of the fracture energy of the kink bandand the length of the fracture process zone at the front of the band solely from the measurements of maximum loads. Optimum fits of the test results by the size effect law are obtained, and the size effect law parameters are then used to identify the material fracture characteristics, Particularly the fracture energy and the effective length of the fracture process zone. The results suggest that composite size effect must be considered in strengthening existing concrete structural members such as bridge columns and beams using a composite retrofitting technique.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.1-18
• /
• 2010

The analysis of structure response and design of buried structures subjected to dynamic destructive loads have been receiving increasing interest due to recent severe damage caused by strong earthquakes and terrorist attacks. For a comprehensive design of buried structures subjected to blast loads to be conducted, the whole system behaviour including simulation of the explosion, propagation of shock waves through the soil medium, the interaction of the soil with the buried structure and the structure response needs to be simulated in a single model. Such a model will enable more realistic simulation of the fundamental physical behaviour. This paper presents a complete model simulating the whole system using the finite element package ABAQUS/Explicit. The Arbitrary Lagrange Euler Coupling formulation is used to model the explosive charge and the soil region near the explosion to eliminate the distortion of the mesh under high deformation, while the conventional finite element method is used to model the rest of the system. The elasto-plastic Drucker-Prager Cap model is used to model the soil behaviour. The explosion process is simulated using the Jones-Wilkens-Lee equation of state. The Concrete Damage Plasticity model is used to simulate the behaviour of concrete with the reinforcement considered as an elasto-plastic material. The contact interface between soil and structure is simulated using the general Mohr-Coulomb friction concept, which allows for sliding, separation and rebound between the buried structure surface and the surrounding soil. The behaviour of the whole system is evaluated using a numerical example which shows that the proposed model is capable of producing a realistic simulation of the physical system behaviour in a smooth numerical process.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.287-290
• /
• 2009

이 논문에서는 가압중수형(Pressurized Heavy Water Reactor) 프리스트레스 콘크리트 격납건물의 1/4 축소모델에 대한 극한내압능력과 전반적인 비선형거동에 관한 유한요소 해석을 수행하였다. 가압중수형 격납건물은 원통형 벽체와 돔으로 구성되었고, 4개의 부벽을 갖는다. 유한요소해석을 위해서 상용코드 ABAQUS를 이용하였고, 콘크리트, 철근 및 텐던에 대한 수치모델링을 작성하여 자중과 내압하중을 적용하였고, 텐던의 2% 변형률을 기준으로 극한내압능력을 평가하였다. 이때 사용된 재료모델로 콘크리트는 Concrete Damaged Plasticity 모델을 사용하였고, 철근과 텐던은 Elasto-Plastic 모델을 적용하였다. 유한요소 해석결과 콘크리트의 초기균열 0.41MPa에서 발생하였고, 극한내압은 0.56MPa 정도로 평가되었다.

• Steel and Composite Structures
• /
• 제5권4호
• /
• pp.305-326
• /
• 2005

The inelastic buckling behaviour of continuously restrained two and three-span continuous beams subjected to concentrated loads and uniformly distributed loads are studied in this paper. The restraint type considered in this paper is fully restrained against translation and elastic twist applied at the top flange. These types of restraints are most likely experienced in industrial structures, for example steel-concrete composite beams and half through girders. The buckling analysis of continuous beam consists of two parts, firstly the moment and shear distribution along the member are determined by employing force method and the information is then used for an out-of-plane buckling analysis. The finite element method is incorporated with so-called simplified and the polynomial pattern of residual stress. Owing to the inelastic response of the steel, both the in-plane and out-of-plane analysis, which is treated as being uncoupled, extend into the nonlinear range. This paper presents the results of inelastic lateral-torsional and lateral-distortional buckling load and finally conclusions are drawn regarding the web distortion.

• Computers and Concrete
• /
• 제18권1호
• /
• pp.99-112
• /
• 2016

Since the preservation of monuments is very important to human societies, different methods are required to preserve historic structures. In this paper, 3D model of arch stone bridge at Pont Saint Martin, Aosta, Italy, was simulated by 1660 integrated separate stones using ABAQUS$^{(R)}$ software to investigate the seismic susceptibility of the bridge. The main objective of this research was to study a method of preservation of the historical stone bridge against possible earthquakes using FRP techniques. The nonlinear behavior model of materials used theory of plasticity based on Drucker-Prager yield criterion. Then, contact behavior between the block and mortar was modeled. Also, Seismosignal software was used to collect data related to 1976 Friuli Earthquake Italy, which constitutes a real seismic loading. The results show that, retrofitting of the arch stone bridge using FRP techniques decreased displacement of stones of spandrel walls, which prevents the collapse of stones.