• 농업과학연구
• /
• 제26권2호
• /
• pp.49-55
• /
• 1999

이 연구는 고로 슬래그 모래를 잔골재로 하여 고로 슬래그 미분말과 플라이 애시를 혼입한 투수성 폴리머 콘크리트의 특성을 구명한 것으로서, 이 연구를 통해 얻어진 결과를 요약하면 다음과 같다. 1. 강도는 고로 슬래그 미분말과 플라이 애시를 중량비로 50%씩 충전재로 사용한 투수성 폴리머 콘크리트에서 가장 크게 나타났고, 보통 시멘트 콘크리트보다 압축강도에서는 36%, 휨강동서는 207%가 증가되었다. 2. 정탄성계수는 $100{\times}10^3{\sim}130{\times}10^3kgf/cm^2$으로 보통 시멘트 콘크리트의 43~51%정도로서 변형성이 크게 나타났고, 충전재 배합별로는 고로슬래그 미분말과 플라이 애시를 중량비로 50%씩 사용한 투수성 폴리머 큰크리트에서 가장 큰 값을 보였다. 3. 동탄성계수는 $102{\times}10^3{\sim}130{\times}10^3kgf/cm^2$로서 보통 시멘트 콘크리트보다 작게 나타났고, 고로슬래그 미분말과 플라이 애시를 50%씩 충전재로 사용한 투수성 폴리머 콘크리트에서 가장 큰 값을 보였으며, 동탄성계수는 정탄성계수보다 약 0~4%정도 큰 값을 보였다. 4. 투수량은 $4.612{\sim}5.913l/cm^2/h$로서 배합설계에 따라 크게 좌우되었으며, 이러한 콘크리트는 투수를 요하는 구조물에 유용하게 이용할 수 있을 것이다.

• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.23-30
• /
• 2011

이 연구는 콘크리트의 내구성 저하요인인 해수침식 및 동결융해 반복작용을 받은 콘크리트의 성능저하 정도를 실험적으로 고찰하기 위하여 포틀랜드 및 혼합시멘트를 사용하여 콘크리트 공시체를 제조한 후 상대동탄성계수, 압축강도 변화 및 기기분석을 통하여 성능저하 원인을 구명하였다. 동결융해 520싸이클까지의 결과 보통포틀랜드 및 저열포틀랜드시멘트는 75% 이상의 상대동탄성계수와 압축강도가 내황산염포틀랜드시멘트 약 44%의 값을 나타내어 상대적으로 낮은 저항성을 나타내었으며, 고로슬래그미분말을 50% 대체하여 사용한 콘크리트가 혼합시멘트계 콘크리트 중 가장 우수한 동결융해 저항성을 나타내었다. 혼합시멘트계 콘크리트의 해수침식 유 무에 따라 비교한 결과, 고로슬래그미분말 콘크리트의 잠재수경성 촉진으로 동결융해 저항성이 우수하였으나, 실리카퓸을 혼합한 콘크리트는 해수침식에 의한 성능저하가 발생하여 동결융해 저항성이 낮아지는 경향을 나타내었고, 해수침식 및 동결융해 작용을 받은 보통포틀랜드 콘크리트는 동결융해 작용에 의한 쏘마싸이트 피크와 해수침식에 의한 석고 및 프리델 염분 피크가 주로 검출되고, 고로슬래그미분말을 혼합한 콘크리트는 해수침식의 유 무에 상관없이 좋은 결과를 나타내었다.

• Computers and Concrete
• /
• 제32권1호
• /
• pp.1-13
• /
• 2023

This paper discusses a framework for predicting the flexural strength of prestressed and non-prestressed FRP reinforced T-shaped concrete beams using soft computing techniques. An analysis of 83 tests performed on T-beams of varying widths has been conducted for this purpose with different widths of compressive face, beam depth, compressive strength of concrete, area of prestressed and non-prestressed FRP bars, elasticity modulus of prestressed and non-prestressed FRP bars, and the ultimate tensile strength of prestressed and non-prestressed FRP bars. By analyzing the data using two soft computing techniques, named artificial neural networks (ANN) and gene expression programming (GEP), the fundamental parameters affecting the flexural performance of prestressed and non-prestressed FRP reinforced T-shaped beams were identified. The results showed that although the proposed ANN model outperformed the GEP model with higher values of R and lower error values, the closed-form equation of the GEP model can provide a simple way to predict the effect of input parameters on flexural strength as the output. The sensitivity analysis results revealed the most influential input parameters in ANN and GEP models are respectively the beam depth and elasticity modulus of FRP bars.

• 한국환경복원기술학회지
• /
• 제9권3호
• /
• pp.17-25
• /
• 2006

To increase freeze-thaw resistance of porous concrete, this study examined physical properties of polymer by replacing paste used as a binding material with polymer, using unsaturated polyester and epoxy resin, and changing the mixing ratio of polymer. According to the result of this study, when the mixing ratio of resin paste to aggregates was 11 to 16%, voids volume was 33 to 37% and unit weight was about 1620 to 1720kg/$m^3$. In comparison with previous studies using cement paste, voids volume increased by about 7 to 16%, while unit weight decreased by about 100 to 300kg/$m^3$. Compressive strength was 90 to 155kg/$cm^2$ at the age of 7 days, which was 5-40kg/$cm^2$ bigger than porous concrete using cement paste. From a viewpoint of freeze-thaw resistance, it was identified that pluse velocity fell by 0.23km/sec, about 7% of the original velocity, when the cycle of freeze-thaw was repeated 300 times. In spite of 300 repetitions of the cycle, relative dynamic modulus of elasticity was more than 60%, which suggested that its freeze-thaw resistance was more excellent compared with the result that relative dynamic modulus of elasticity of porous concrete using cement paste was 60 % or less under the condition of 80 repetitions of freeze-thaw cycle.

• Structural Engineering and Mechanics
• /
• 제46권2호
• /
• pp.295-322
• /
• 2013

Steel fiber reinforced self-compacting concrete (SFRSCC) is a relatively new composite material which congregates the benefits of self-compacting concrete (SCC) technology with the profits derived from the fiber addition to a brittle cementitious matrix. Steel fibers improve many of the properties of SCC elements including tensile strength, toughness, energy absorption capacity and fracture toughness. Modification in the mix design of SCC may have a significant influence on the SFRSCC mechanical properties. Therefore, it is vital to investigate whether all of the assumed hypotheses for steel fiber reinforced concrete (SFRC) are also valid for SFRSCC structures. Although available research regarding the influence of steel fibers on the properties of SFRSCC is limited, this paper investigates material's mechanical properties. The present study includes: a) evaluation and comparison of the current analytical models used for estimating the mechanical properties of SFRSCC and SFRC, b) proposing new relationships for SFRSCC mixtures mechanical properties. The investigated mechanical properties are based on the available experimental results and include: compressive strength, modulus of elasticity, strain at peak compressive strength, tensile strength, and compressive and tensile stress-strain curves.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.47-53
• /
• 2004

Permeable polymer concrete can be applied to roads, sidewalks, river embankments, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using blast furnace slag powder and stone dust of industrial by-products as fillers for Eco-permeable polymer concrete. Different mix proportions were tried to find an optimum mix proportion of the Eco­permeable polymer concrete. The tests were carried out at $20{\pm}1^{circ}C$ and $60{\pm}2\%$ relative humidity. At 7 days of curing, unit weight, coefficient of permeability, dynamic modulus of elasticity, compressive, flexural and splitting tensile strengths ranged between $1,821{\~}1,955 kg/m^{3}$, $0.056{\~}0.081\;cm/s$, $114{\times}0^{2}{\~}157{\times}10^{2}\;MPa,\;17.6{\~}24.7\;MPa,\;5.98{\~}7.94\;MPa\;and\;3.43{\~}4.70\;MPa$, respectively. It was concluded that the blast furnace slag powder and stone dust can be used in the Eco-permeable polymer concrete.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.321-327
• /
• 2019

Experimental isotherm compressive tests show that concrete behaviour is dependent on temperature. The aim of such tests is to reproduce how concrete will behave under environmental changes within a moderate range of temperature. In this paper, a novel constitutive elastic damage behaviour law is proposed based on a free energy with an apparent damage depending on temperature. The proposed constitutive behaviour leads to classical theory of thermo-elasticity at small strains. Fixed elastic mechanical characteristics and fixed evolution law of damage independent of temperature and the material volume element size are considered. This approach is applied to compressive tests. The model predicts compressive strength and secant modulus of elasticity decrease as temperature increases. A power scaling law is assumed for specific entropy as function of the specimen size which leads to a volume size effect on the stress-strain compressive behaviour. The proposed model reproduces theoretical and experimental results from literature for tempertaures ranging between $20^{\circ}C$ and $70^{\circ}C$. The effect of the difference in the coefficient of thermal expansion between the mortar and coarse aggregates is also considered which gives a better agreement with FIB recommendations. It is shown that this effect is of a second order in the considered moderate range of temperature.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.585-588
• /
• 1999

This study is performed to verify the effect of CSA expansive additives for concrete by material properties test and 4 point-bendig test of RC slabs. The result shows that the variations of compress strength, bending strength, and modulus of elasticity of expansive concrete are the same as those of plain concrete. And the crack load of RC slabs with expansive concrete are increased in comparision with that of plain concrete, but the ultimate strength of RC slabs with expansive concrete is decreased.

• International Journal of Concrete Structures and Materials
• /
• 제7권1호
• /
• pp.61-69
• /
• 2013

This paper discusses the properties of RCA, the effects of RCA use on concrete material properties, and the large scale impact of RCA on structural members. The review study yielded the following findings in regards to concrete material properties: (1) replacing NA in concrete with RCA decreases the compressive strength, but yields comparable splitting tensile strength; (2) the modulus of rupture for RCA concrete was slightly less than that of conventional concrete, likely due to the weakened the interfacial transition zone from residual mortar; and (3) the modulus of elasticity is also lower than expected, caused by the more ductile aggregate. As far as the structural performance is concerned, beams with RCA did experience greater midspan deflections under a service load and smaller cracking moments. However, structural beams did not seem to be as affected by RCA content as materials tests. Most of all, the ultimate moment was moderately affected by RCA content. All in all, it is confirmed that the use of RCA is likely a viable option for structural use.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.281-284
• /
• 2004

The most important reason of using of ultra high strength concrete in super tall building is that ultra high strength concrete can reduce the section of members and control side sway effectively. However, the practical utilization of ultra high strength concrete is dependent not only on the production techniques, but also the overall preparation including proper code provisions, construction technique. The purpose of this study is to evaluate of mechanical properties of UHSC, such as modulus of elasticity, stress-strain behavior, modulus of rupture and tensile splitting strength. It is similar to normal or high strength concrete but necessary to discern the difference between normal or high strength concrete and ultra high strength concrete and modify existed equations. And in this study another important factor is to discern the difference according to member size, curing method in ultra high strength concrete experimentally.