• 한국안전학회지
• /
• 제25권6호
• /
• pp.155-160
• /
• 2010

In this study, detailed assessment for durability performance were performed on the chloride protected concrete structures to investigate the effectiveness of chloride protection. And economical efficiency for the chloride protected concrete structures were studied by LCC(Life Cycle Cost) analysis. In the comparison result of the first section repair time, it was found that the chloride protected concrete structures was economical better than the non-protected concrete structures in the long term. According to the analysis result of the accumulated chloride concentration by used time and chloride ion concentration by depth, it can be seen that the permeation through time from chloride has increased two times in the chloride protected concrete structures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.149-150
• /
• 2018

The RC buildings which are constructed on the seaside are followed by KBC(2016) to achieve the minimization of durability damage. To control the corrosion of the reinforced steel bar by salt attack, W/C should be under 0.4 and specified concrete strength is more than 35MPa in the concrete/building construction standard specification. Ready mixed concretes which have usually include the admixtures in Busan were tested to certify the salt attack durability. In the same specified concrete strength, remarkable salt attack durability was evaluated in comparison to OPC.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.313-316
• /
• 2004

In this paper, it was assessed durability of ultra-high strength cementitious composites(UHSCC) with the range of 180MPa of compressive strength through the test method of chloride ion resistance, carbonation, freezing-thawing resistance, permeability. In order to compare with ultra-high strength cementitious composites, normal concrete and high-strength concrete were also tested. As the experimental result, it showed that UHSCC was cleary superior to the durability performance of normal concrete and high-strength concrete.

• Computers and Concrete
• /
• 제20권6호
• /
• pp.683-688
• /
• 2017

This paper presents the experimental investigations on the compressive strength and permeation properties of geopolymer concrete prepared with low calcium fly ash as the primary binder activated with different percentage of Alccofine. The durability aspect was investigated by performing permeable voids and water absorption tests since permeability directly influences the durability properties. The test results show that Alccofine significantly improves the compressive strength and reduces the water permeability thus enhances the durability of geopolymer concrete at ambient curing regime which encourages the use of geopolymer concrete at ambient curing condition thus promising its use in general construction also.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.175-191
• /
• 2014

In recent years, the emergence of nanotechnology and nanomaterial has created hopes to improve various properties of concrete. Nano silica as one of these materials has been introduced as a cement replacement material for concrete mixture in construction applications. It can modify the properties of concrete, due to high pozzolanic reactions and also making a denser microstructure. On the other hand, it is well recognized that the use of mineral admixtures such as silica fume affects the mechanical properties and durability of cementitious materials. In addition, the superior performance of self-consolidating concrete (SCC) and self-consolidating mortars (SCM) over conventional concrete is generally related to their ingredients. This study investigates the effect of nano silica and silica fume on the compressive strength and chloride permeability of self-consolidating mortars. Tests include compressive strength, rapid chloride permeability test, water permeability, capillary water absorption, and surface electrical resistance, which carried out on twenty mortar mixtures containing zero to 6 percent of nano silica and silica fume. Results show that SCMs incorporating nano silica had higher compressive strength at various ages. In addition, results show that nano silica has enhanced the durability SCMs and reduced the chloride permeability.

• 콘크리트학회논문집
• /
• 제23권6호
• /
• pp.757-763
• /
• 2011

콘크리트의 효율적인 조기강도 확보를 위해 시멘트의 성능 향상에 주안점을 두고 연구를 진행하였다. 이 연구는 선행 연구인 시멘트 생산 공정 중 부수적으로 발생되는 크기가 작은 시멘트(이하 미립자 시멘트, FC라 함)를 이용하는 콘크리트의 조기강도 발현 특성 연구에 대한 후속 연구로서 내구성 검토를 실시하였다. 실험 결과 굳지 않은 콘크리트에서는 각 배합별 목표 범위를 모두 만족하는 것으로 나타났고, 미립자 시멘트를 혼입하였을 때 응결시간은 촉진되었고 압축강도는 증진되었으며 수화열은 유사한 수준인 것으로 평가되었다. 특히, 내구성 측면에서는 미립자 시멘트 혼입 유 에 따라 모든 실험 항목에서 유사한 수준인 것으로 평가되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.653-656
• /
• 2008

본 연구의 목적은 댐의 설계 및 건설에 있어 댐 콘크리트의 내구성을 향상시키기 위한 것이다. 특히, 콘크리트 표면 차수벽형 석괴댐(Concrete Faced Rockfill Dam)의 경우 표면 차수벽 콘크리트의 내구성은 시멘트의 일부를 플라이애쉬로 치환하고 blended 섬유(고인성 섬유 + 일반 섬유)를 사용함으로써 향상될 수 있다. 따라서 본 연구에서는 플라이애쉬의 치환율 및 blended 섬유의 혼입율에 따른 표면 차수벽 콘크리트의 내구성과 열특성 실험을 수행하고 그 효과를 분석하였다. 실험결과 플라이애쉬 치환율은 15%, blended 섬유의 혼입율은 0.1%(고인성 섬유 $0.09kg/m^3$ + 일반 섬유 $0.81kg/m^3$)인 경우 내구성 측면에서 가장 우수한 결과를 보여 주었으며, 특히 다른 배합에 비하여 균열발생 가능성이 상대적으로 낮은 것으로 나타났다.

• Computers and Concrete
• /
• 제10권4호
• /
• pp.391-407
• /
• 2012

Utilization of supplementary cementing materials (SCM) by the cement industry, as a highly promising solution of sustainable cement development aiming to reduce carbon dioxide emissions, necessitates a more thorough evaluation of these types of materials on concrete durability. In this study a comparative assessment of the effect of SCM on concrete durability, of every cement type as defined in the European Standard EN 197-1 is taking place, using a software tool, based on proven predictive models (according to performance-related methods for assessing durability) developed and wide-validated for the estimation of concrete service life when designing for durability under harsh environments. The effect of Type II additives (fly ash, silica fume) on CEM I type of cement, as well as the effect of every Portland-composite type of cement (and others) are evaluated in terms of their performance in carbonation and chloride exposure, for a service life of 50 years. The main aim is to portray a unified and comprehensive evaluation of the efficiency of SCM in order to create the basis for future consideration of more types of cement to enter the production line in industry.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.41-48
• /
• 2018

Carbonation is one of the major detrimental factors to the reinforced concrete structures owing to penetration of atmospheric CO2 through the micro pores, thereby it reduces the durability of the concrete. The maintenance periods and cost for concrete according to the coefficient variation of different finishing materials is documented in literature. However, it is required to carry out the systematic and well planned studies. Therefore, keeping them in mind, surface repair was carried out to the carbonated concrete and the maintenance cost was calculated to measure the durability life after repair with different variable. The deterministic and probabilistic methods were applied for durability and repair cost of the concrete. In the existing deterministic model, the cost of repair materials increases significantly when the concrete structure reaches its service life. In present study using a stochastic model, the maintenance period and cost was evaluated. According to obtained results, there was no significant difference in the number of maintenance of the coefficient variation. The initial durability has a great influence on the maintenance time and cost of the structure. Unlike the deterministic model, the probabilistic cost estimating model reduces the number of maintenance to the target service life expectancy.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.59-71
• /
• 2021

This research aims to study the utilization of olive waste ash (OWA) in the production of concrete as a partial substitute for cement. Effects of using OWA on the physical and mechanical properties of concrete mixtures have been investigated. This is done by carrying out tests involving the addition of various percentages of OWA to cement (0%, 5%, 10% and 15%). For each percentage, tests were performed on both fresh and hardened concrete; these included slump test, unit weight test and compressive strength test after 7, 28 and 90 days. Durability tests were investigated in solutions containing 5% NaOH and MgSO4 by weight of water. In addition, resistance to high temperatures was tested by subjecting the cubes to high temperatures of up to 170℃. The results of this research indicate that a higher percentage of OWA gives a lower compressive strength and lower workability but higher performance in terms of durability against both different weather conditions and high temperatures.