• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.638-649
• /
• 2020

Purpose: The objective of this study is to evaluate the load carrying capacity of a target bridge structure based on the simple slab bridge of concrete over 20 years of public service. Method: By performing static loading test and dynamic loading test, the displacement, strain, impact factor, and natural frequency values were measured and evaluated through analysis method. Result: The main results of this study are as follows. First, the maximum displacement and maximum strain of S1 were assessed at 2.917 mm and 44.720 𝜇ε( tensile) and -13.760 𝜇ε(compression), respectively, with S2 maximum displacement and maximum strain being 2.100 mm and 4.870 𝜇ε(tensile), respectively. Second, the maximum measured impact factor was 0.191 in section S1 A-A, and the maximum measured impact factor was 0.155 in section S2 C-C. Third, the natural frequency was assessed at 6.086 Hz, and the measurement was found to be within the range of 6.152 Hz to 6.738 Hz. Conclusion: The tested bridge may be evaluated to show good behavior and characteristics for the design load.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.947-953
• /
• 2005

Previous test results showed that the current ASTM(American Standard for Testing and Materials) grip adapter for GFRP(Glass Fiber Reinforced Polymer) rebar was not fully successful in developing the design tensile strength of GFRP rebars with reasonable accuracy. It is because the current ASTM grip adapter which is composed of a pair of rectangular metal blocks of which inner faces are grooved along the longitudinal direction does not take into account the various geometric characteristics of GFRP rebar such as surface treatment, shape of bar cross section as well as physical characteristics such as poisson effect, elastic modulus in the transverse direction and so on. The objective of this paper is to provide how to proportion the optimum diameter of inner groove in ASTM grip adapter to develop design tensile strength of GFRP rebar. The proportioning of inner groove in ASTM grip adapter is based on the force equilibrium of GFRP rebar between tensile capacity and minimum frictional resistance required along the grip adapter. The frictional resistance of grip adapter is calculated based on the compressive strain compatibility in radial direction induced by the difference between diameter of GFRP rebar and inner groove In ASTM grip. All testing procedures were made according to the CSA S806-02 recommendations. From the preliminary test results on round-type GFRP rebars, it was found that maximum tensile loads acquired under the same testing conditions is highly affected by the diameter of inner groove in ASTM grip adapter. The grip adapter with specific dimension proportioned by proposed method recorded the highest tensile strength among them.

• Journal of Korea Trade
• /
• v.23 no.8
• /
• pp.110-131
• /
• 2019

Purpose - This paper investigates the implications for facilitating trade in the products of Industry 4.0. To identify the issues caused by the conflicts of policy objectives such as applying the tariff concession under the ITA and imposing the export control, by exploring the case of classification of drones. Design/methodology - We adopted a single case study method to gain a deeper understanding of the complex and multifaceted issues of Customs classification in the context of facilitating trade in the products of Industry 4.0. This study employs the case of drones to explore how these issues of Customs classification affect trade facilitation. We ensured the internal validity of the study by confirming the pattern of the results with the existing theories. Findings - Our main findings can be summarised as follows: the intrinsic nature of the products that converge several technologies causes issues in the classification. The inconsistency in product classification delays customs clearance by hindering the Customs risk-management system that pinpoints products subject to controls. To address the issues, therefore, we proposed fundamental reforms of Customs to empower themselves with management roles. Facilitating trade in the products of Industry 4.0 requires more enhanced Customs capability. Therefore, the reforms should include comprehensive capacity-building activities, such as changes in staff-trainings, promotion system, organisation and culture. Customs also need roles in robust designing of cooperative systems to compensate for the lacks of controls and to ensure concrete risk management for expedited Customs procedures. As well, by equipping the Single Window of Customs with crucial control functions of other ministries, Customs need to support the cooperation. The role of harmonising various preaudits of other ministries with its own is another essential role that ensures predictability of clearance procedure. Originality/value - There are scanty studies in the field of knowledge about what obstacles exist and what solution is available in the course of transforming to 'Industry 4.0'. In filling out the gap of knowledge, this paper is of academic significance in that it applies the research theory on trade facilitation for the specific cases of classification of the product of Industry 4.0 to verify its effectiveness and to extend the subject of the studies to the scope of Industry 4.0. It also has practical significance in that the results have provided implications for reforms of Customs procedures to facilitate trade in the products of Industry 4.0.