• 한국세라믹학회지
• /
• 제28권10호
• /
• pp.831-837
• /
• 1991

Spherical TiO2 particles are prepared from TiCl4 aqueous solution by the spray pyrolysis method using ultrasonic atomization technique. The formation mechanism of TiO2 particles from atomized droplets it studied by varying the concentration of the source solution, reaction temperature, and the solvent. spherical TiO2 powders with almost the same normalized particle size distribution can be made reproducibly by changing the concentration of the source solution, and their mean sizes are in the range of 0.2~1.4${\mu}{\textrm}{m}$.

• Journal of Chest Surgery
• /
• 제23권6호
• /
• pp.1084-1089
• /
• 1990

Plasma protein concentration, plasma albumin concentration, hematocrit, and arterial blood gas tension were measured in 15 mongrel dogs undergoing heart transplantation with cardiopulmonary bypass. The hemodilution due to priming solution resulted in a 49% decrease in plasma protein concentration, a 57% decrease in plasma albumin concentration, a 46%a decrease in hematocrit. The measurements had returned to preperfusion values 1 hour after the end of cardiopulmonary bypass. The intraoperative changes in plasma protein and albumin concentration did not correlate with changes in alveolar-arterial oxygen tension gradients[D[A\ulcorner PO2]]. It is concluded that, in the absence of an increase in left atrial pressure, marked decrease in plasma protein concentration can be tolerated without the occurrence of pulmonary edema. And further study should be done to determine how to prepare an ideal priming solution.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.938-944
• /
• 1999

도라지의 색상발현을 위하여 반응표면분석법으로 도라지의 threonine 침지농도 및 볶음조건에 따른 도라지차의 기계적 색도 및 관능적 색상 변화를 모니터링 하였다. 기계적 색도와 관능적 색상에 대한 회귀식의 $R^{2}$는 모두 0.87 이상으로 5% 수준에서 유의성이 인정되었다. 백색도가 가장 높은 침지 및 볶음조건은 threonine 농도 0.09%에서 침지한 후 건조하여 $142.37^{\circ}C$에서 21.94분 볶음처리하는 것으로 나타났다. 적색도가 가장 높은 침지 및 볶음조건은 threonine 농도 1.24%에서 침지한 후 건조하여 $154.01^{\circ}C$에서 28.59분 볶음처리하는 것으로 나타났고, 가장 낮은 침지 및 볶음조건은 threonine농도 1.67%에서 침지한 후 건조하여 $137.61^{\circ}C$에서 24.62분 볶음처리하는 것으로 나타났다. 황색도가 가장 높은 침지 및 볶음조건은 threonine 농도 1.10%에서 침지한 후 건조하여 $154.72^{\circ}C$에서 27.12분 볶음처리하는 것으로 나타났다. 관능적 특성으로서 도라지차의 색상에 대한 관능평점은 threonine 농도 1.25%, 볶음온도 $141.81^{\circ}C$및 볶음시간 34.14분에서 가장 높았다.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1457-1462
• /
• 2007

A simple and facile sonochemical route was described for the fabrication of diameter-controlled ZnO nanorod arrays on Si wafers. The diameter of ZnO nanorods was controlled by the concentration of zinc cations and hydroxyl anions in aqueous precursor solution. At high concentration of the precursor solution, thick ZnO nanorod arrays were formed. On the contrary, thin ZnO nanorod arrays were formed at low concentration of the precursor solution. The average diameter of ZnO nanorods varies from 40 to 200 nm. ZnO nanorod arrays with sharp tip were also fabricated by the step-by-step decrease in precursor solution concentration. The crystal structure and optical characteristics of ZnO nanorods were investigated by transmission electron microscopy, X-ray diffraction, and photoluminescence spectroscopy. Growth mechanism of ZnO nanorod arrays was also proposed.

• 한국표면공학회지
• /
• 제4권1호
• /
• pp.16-23
• /
• 1971

In this study , fluoborte solution consisting of lead fluoborate, tin fluoborate and cupric acetate was used. By addition of small amount of Cu+= ion to the solution, the Cu content of deposition layer was almost controlled less than 5%. The amount of Cu in deposition layer was almost constant without any influence of Pb++ & Sn++ in the solution, and the amount of Pb was increased by the increase of total concentration of Pb++ +Sn++ in the solution, and the amount of Pb was increased by the increase of total concentration of Pb++ +Sn++ in the solution . Agitation of plating solution & low current density result in the increase of Cu content. Analyzing of microscopic structures and etching tests of the deposited alloy, it was believed that the alloy had a lamellar structure consisting of copper rich lamellar and lead rich layer.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.607-614
• /
• 2015

To provide the clear images from the direct light on electrical board and display devices, anti glare treatment of display cover glass is needed. In this study, the effects of surface treatment temperature, concentration, and etching solution coating thickness of the gel phase on optical elements control such as gloss, haze of reflected light and transmittance, were investigated. Cover glasses were treated at different coating thickness and additive concentration. The optical properties were examined using spectrophotometer, gloss and haze meter. The surface morphology and roughness were measured by the optical microscope and Ra measuring instrument. The etching rate and surface morphologies were dramatically affected by the concentration of acid additive in the viscous gel because of re-crystallization of components in the etching solution, hydrogel formation and coagulant after coating on glass substrate. In our experimental range, cover glass which is surface-treated with various optical properties as well as the morphology uniformity was obtained; in particular, optical properties could be controlled by etching solution coating thickness of the gel phase and the concentration of additive. The gloss was depended on the surface roughness and it showed the linear relationship between optical transmittance and haze of reflected light, respectively.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.16-25
• /
• 2004

The flow and heat/mass transfer in the falling-film of a heat exchanger can be influenced by the motion of the surrounding refrigerant vapor. In this study, the effect of the vapor flow direction on the absorption heat transfer has been investigated for a falling-film helical coil which is frequently used as the absorber of ammonia/water absorption refrigerators. The experiments were carried out for different solution concentration. The heat and mass transfer performance was measured for both parallel and counter-current flow. The effect of vapor flow on the heat and mass transfer is found to be increased with decreasing solution concentration. In the experiments with low solution concentration, whose vapor specific volume is great, the counter-current flow of vapor resulted in uneven distribution of falling-film and reduced the heat transfer performance of the absorber. The direction of the vapor flow hardly affected the thermal performance as the solution concentration became stronger since the specific volume of the ammonia/water vapor was much smaller than that of the water vapor.

• Korean Membrane Journal
• /
• 제3권1호
• /
• pp.17-23
• /
• 2001

Polyethersulfone (PES) and cellulose acetate (CA) ultrafiltration (UF) membranes having different molecular weight cut-off values were prepared by immersion precipitation method by changing the compositions of easting solution. Egg white solution was concentrated to volume concentration ratio 4 in tubular UF with membranes made of moderately hydrophobic PES and hydrophilic CA. The process Parameters such as pressure and fluid velocity were controlled in order to apply successfully for egg white solution and to investigate the pressure dependency. The resistance values were measured to investigate the fouling and concentration polarization effect on membrane performance. During concen- tration of egg white solution by UF, the fouling layer appeared to contribute little resistance to flux compared to that of polarized layer.

• 생물환경조절학회지
• /
• 제7권1호
• /
• pp.55-61
• /
• 1998

본 실험은 배양액 내의 황산이온이 참쑥(Artemisia mongolica var. tenuifolia)의 생육에 미치는 영향을 알아보고자 수행되었다. 황산이온은 0, 0.5, 1, 2, 3mM의 농도로 처리되었는데 양액은 벨기에의 채소연구소에서 허브용양액으로 개발된 양액조성을 변형하여 이용하였다. 참쑥의 생육은 일반적으로 3mM 처리에서 좋았으며 건물률 또한 3mM 처리에서 가장 좋았다. 배양액내의 황산이온 농도가 증가할수록 참쑥의 엽록소 함량은 증가하였는데 특히 엽록소 a의 함량이 b함량에 비해 증가의 폭이 컸다. 참쑥의 무기물 함량은 배양액내의 황산이온 농도와 유의성을 보이지 않았으나 조직내 Ca의 함량은 3mM 처리에서 급격히 감소하였다. 식물에 의한 황산이온의 흡수는 배양액내의 농도가 증가할수록 증가하였는데 2mM까지는 서서히 증가 하다가 3mM에서 현저하게 증가하였다. 1mM 황산이온 처리에서 정유의 함량은 가장 높았으나 그 이상으로 농도가 증가할 경우 정유의 함량은 오히려 감소하였다.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.798-802
• /
• 1996

The photochemical decomposition of aqueous ammonia in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The decomposition of ammonia depended on the concentration of oxygen in the solution. With increasing the concentration of oxygen, the decomposition of ammonia diminishes. Hydrazine is found the major product from the irradiation. In the presence of oxygen, hydrogenperoxide was also produced. The product yields depended also on the concentration of oxygen in the solution. The initial quantum yield of the products and of the ammonia decomposed were determined. Probable reaction mechanisms for the reaction were presented from the products analysis.