• Steel and Composite Structures
• /
• v.3 no.3
• /
• pp.213-229
• /
• 2003

A high precision shear deformable triangular element has been proposed for free vibration analysis of composite trapezoidal plates. The element has twelve nodes at the three sides and four nodes inside the element. Initially the element has fifty-five degrees of freedom, which has been reduced to forty-eight by eliminating the degrees of freedom of the internal nodes through static condensation. Plates having different side ratios (b/a), boundary conditions, thickness ratios (h/a=0.01, 0.1 and 0.2), number of layers and fibre angle orientations have been analyzed by the proposed shear locking free element. Trapezoidal laminate with concentrated mass at the centre has also been analyzed. An efficient mass lumping scheme has been recommended, where the effect of rotary inertia has been included. For validation of the present element and formulation few results of isotropic trapezoidal plate and square composite laminate have been compared with those obtained from open literatures. The numerical results for composite trapezoidal laminate have been given as new results.

• Journal of the Korean earth science society
• /
• v.35 no.4
• /
• pp.237-248
• /
• 2014

To analyze the characteristics of deposition and dispersion of volcanic ash emitted from Mt. Kirishima on January 26, 2011, several numerical simulations were carried out by using the numerical models including Weather and Research Forecast (WRF) and FLEXPART. The dispersion of ash located under 1 km high tends to be concentrated along the prevailing wind direction on January 26 2011. On the other hand, volcanic ash released on the following day spreads to Kirishima bay due to the intensified high pressure air mass in southern Kyushu. When Siberian air mass was intensified January 26, 2011, the deposition of volcanic ash is concentrated restrictedly in the narrow area along the wind direction of the downwind side of Mt. Kirishima. The development of high pressure air mass over the eruption area tends to induce the intensified horizontal diffusion of volcanic ash. Since the estimated deposition of volcanic ash is agreed well with observed values, the proposed numerical simulation is reasonable to use the assessment on the behavior of volcanic ash.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.199-204
• /
• 1997

In this paper, the result of application of vibration method to the orthotropic plates with free edges supported on elastic foundation and with a pair of opposite edges under axial forces is presented. Such plates represent the concrete highway slab and hybrid composite pavement of bridges. The reinforced concrete slab can be assumed as a special orthotropic plate, as a close approximation. The highway slab is supported on elastic foundation, with free boundaries. Sometimes, the pair of edges perpendicular to the traffic direction may be subject to the axial forces. The plate is subject to the concentrated load/loads, in the form of traffic loads, or the test equipments. Finite difference method is used to obtain the deflection influence surfaces needed for vibration analysis. The influence of the modulus of the foundation, the aspect ratio of the plate, and the magnitudes of the axial forces and the concentrated attached mass on the plate, under the natural frequency is thoroughly studied.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.1
• /
• pp.13-22
• /
• 1989

This study made an analysis of the characteristics of vibration & tone color of the piano strings on which a concentrated mass was set to give variety of different variations to the gamut. Theoretical analyses in this study were based on discrete and continuous system, of which the former was transformed into a multi-degree of freedom system by dividing into a number of small parts, while the latter utilized mode summation and Laplace transformation methods. And experiments were carried out with setting concentrated masses on upright piano string.

• Journal of Korean Society on Water Environment
• /
• v.27 no.4
• /
• pp.475-485
• /
• 2011

Lake Sihwa has a very unique watershed environment, surrounded by industrial, urban and rural catchment area with different land use. The first flush phenomenon was investigated in 3 catchment area. 4TG, representing the industrial area, shows rapid discharges of highly concentrated pollutants during the early stages of a storm and it is indicating a strong first flush effect. At AS, representing the urban area, the pollutant concentration reached its peak approximately 2~3 hours after the start of storm, which is a strong first flush effect did not appear. JJB and MS represent the rural areas, the PEMC analysis results suggest that highly concentrated pollutants were discharged during the middle and latter stages of a storm, instead of early pollutant runoff due to the effects of rainwater runoff.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.6
• /
• pp.430-437
• /
• 2003

A conveying fluid cantilever pipe subjected to a uniformly distributed tangential follower force and three moving masses upon it constitute this vibrational system. The influences of the velocities of moving masses, the distance between two moving masses, and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a cantilever pipe system by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a cantilever pipe without moving masses, and three constant velocities and three constant distances between two moving masses are also chosen. When the moving masses exist on pipe, as the velocity of the moving mass and the distributed tangential follower force Increases. the deflection of cantilever pipe conveying fluid is decreased, respectively Increasing of the velocity of fluid flow makes the amplitude of a cantilever pipe conveying fluid decrease. After the moving mass passed upon the pipe, the tip- displacement of a pipe is influenced by the coupling effect between interval and velocity of moving mass and the potential energy change of a cantilever pipe. Increasing of the moving mass make the frequency of the cantilever pipe conveying fluid decrease.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.3 no.1
• /
• pp.69-76
• /
• 1974

The method of amino acid sequence determination from the C-terminal amino acid is proposed and mass spectrometric identification of thiohydantoins described previously. In this paper was discussed the fragmentation of thiohydantoin-ring by deutero substitution and model tripeptide have been degraded through three stages each, with interpretable results. The conditions employed in this method are mild enough for biological materials. The main features of the method are the following. 1. Thiohydantoins were formed in a non-aqueous medium a mixture of acetic anhydride, acetic acid and ammonium thiocyanate. 2. Mass sepectra of thiohydantoins derived from 20 amino acids were obtained with a mass spectrometer, JEOL model JMS-06H. 3. Cleavage of peptidyl thiohydantoin was made with an acidic from of a cation-exchange resin. (Amberlite IR-120) 4. Separation of the cleaved thiohydantoin and the parent peptide less one amino acid moiety was made by chromatography on a Sephadex G-10 column. 5. The peptide fraction was concentrated by freezedrying. 6. Thiohydantoin derivative of carboxyl terminal amino acid residue was introduced with a direct inlet probe in methanol solution.

• Structural Engineering and Mechanics
• /
• v.26 no.1
• /
• pp.1-14
• /
• 2007

Because of complexity, the literature regarding the free vibration analysis of a Timoshenko beam carrying "multiple" spring-mass systems is rare, particular that regarding the "exact" solutions. As to the "exact" solutions by further considering the joint terms of shear deformation and rotary inertia in the differential equation of motion of a Timoshenko beam carrying multiple concentrated attachments, the information concerned is not found yet. This is the reason why this paper aims at studying the natural frequencies and mode shapes of a uniform Timoshenko beam carrying multiple intermediate spring-mass systems using an exact as well as a numerical assembly method. Since the shear deformation and rotary inertia terms are dependent on the slenderness ratio of the beam, the shear coefficient of the cross-section, the total number of attachments and the support conditions of the beam, the individual and/or combined effects of these factors on the result are investigated in details. Numerical results reveal that the effect of the shear deformation and rotary inertia joint terms on the lowest five natural frequencies of the combined vibrating system is somehow complicated.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1489-1494
• /
• 2004

A gas chromatography/mass spectrometric assay method was developed for the determination of persistent organochlorine pollutants (POPs) in hair. For the exact extraction study was used hair of rat exposed with POPs. Sonication of the hair matrix with 3 M HCl solution in methylene chloride of the extraction methods studied was the most efficient and rapid sample preparation method. After sonication of rat hair was achieved clean up with a solid phase extraction procedure using silica gel-florisil. Elution was performed with 8 mL of methylene chloride. The eluate was concentrated to approximately 100 ${\mu}L$ and analyzed by gas chromatography-mass spectrometry (GC-MS). Detection limits of POPs were in the concentration range of 0.6-1.2 ng/g in rat hair. Aldrin, dieldrin, p,p-DDT and mirex were dosed rat for 4 weeks at concentration of 0.01 mg/L in drinking water and detected in rat hair at concentration of 2.8, 11.3, 7.9 and 15.6 ng/g, respectively. Aldrin and p,p-DDT were metabolized to dieldrin and p,p-DDE, which were detected in concentration of 9.7 and 2.9 ng/g in rat hair, respectively. The developed method may be valuable to be used to analyze POPs in human hair.

• Analytical Science and Technology
• /
• v.13 no.5
• /
• pp.666-674
• /
• 2000

The present study describes an analytical method for the determination of polybrominated biphenyls (PBBs) in biota samples by gas chromatography-mass spectrometry (GC/MS). PBBs are extracted twice from 20 g samples with mixture solvent 40mL acetone and 80mL hexane using ultrasonic agitation for 20 min. Lipids in extracts are degraded by concentrated sulfuric acid and then PBBs are purified with Florisil column. The purified extracts are analyzed by GC/MS-selected ion monitoring mode for the quantitation of PBBs in biota sample. The overall recovery yields of PBBs range between 77 and 111% under these experimental conditions.