• 한국공간구조학회논문집
• /
• 제8권5호
• /
• pp.67-74
• /
• 2008

요즘은 비선형해석과 유한요소해석이 가능하며 또 불연속면을 모델링을 통해 구현할 수 있도록 개발된 컴퓨터 프로그램이 개발되어 사용되고 있다. 그러나 석조구조물의 물성을 파악하지 않고서는 이러한 프로그램을 이용하여 실제거동을 예측하기가 매우 곤란하다. 이를 위해 석재와 석재의 접촉부의 강성의 변수를 사이부재를 가정하는 방식으로 수행하였으며, 실제 고유진동수를 측정하고, 석탑을 다자유도계 구조물로 가정하여 고유치 해석을 한 다음 이론상 고유진동수와 실제고유진동수가 일치하도록 접촉면의 강성을 조절하는 방식으로 모델링을 수행하였다. 연구를 위해 정림사지 오층석탑을 대상으로 구조모델링을 실시하였다. 본 연구결과는 석탑형 문화재에 대해 범용 프로그램을 이용한 구조모델링을 가능하도록 함으로써 주요 석탑형 문화재의 연직하중 뿐 아니라 진동이나 횡력에 대한 구조안전성 평가를 하는 과정에서도 유용할 것으로 기대된다.

• 전산구조공학
• /
• 제7권4호
• /
• pp.57-67
• /
• 1994

지하구조물의 주위지반은 일반적으로 퇴적층의 형성 또는 지각의 변동에 의해 다층구조를 가지게 되므로, 구조물 및 주위지반의 거동을 정확히 예측하기 위해서는 해석에 다층구조의 영향을 반영해야 한다. 본 연구에서는 다층으로 구성된 지하구조계를 대상으로 하여 구조물과 그 주변에는 비선형 유한요소를 사용하고, 비선형성이 상대적으로 미약한 주변 다층지반에는 선형 경계요소를 사용하여 재료의 비선형성과 비균질성을 고려한 효율적인 조합해석방법을 개발하고자 한다. 반무한영역에 설정되는 다층구조계를 경계요소로 해석할 경우 그 기본해가 제한되어 있으므로, 본 연구에서는 기존의 무한기본해를 이용하는 방법을 사용하였다. 무한기본해를 이용하는 내부영역문제의 경우 각각의 균질한 층을 부영역(subdomain)으로 분할하고 계방정식을 구성한 뒤에 접합면에 대하여 평형조건과 적합조건을 만족시켜 주는 방법을 사용하여 비균질성을 고려한다. 부영역으로 층을 분할한 내부영역문제의 경계요소해석 결과는 선형 유한요소해석 결과와 비교하여 검증하였고, 검증된 경계요소 프로그램을 비선형 유한요소 프로그램과 조합하였다. 조합해석 결과, 굴착부 주변의 응력집 중부에는 비선형 유한요소를 사용하고, 비선형의 영향이 미소한 주변의 다층지반에 대해서는 부영역에 의한 선형 경계요소를 사용하는 조합해석방법이 합리적이고 효율적임을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.1-39
• /
• 2016

The finite element method (FEM), discrete element method (DEM), and Discontinuous deformation analysis (DDA) are among the standard numerical techniques applied in computational geo-mechanics. However, in some cases there no possibility for modelling by traditional finite analytical techniques or other mesh-based techniques. The solution presented in the current study as a completely Lagrangian and mesh-free technique is smoothed particle hydrodynamics (SPH). This method was basically applied for simulation of fluid flow by dividing the fluid into several particles. However, several researchers attempted to simulate soil-water interaction, landslides, and failure of soil by SPH method. In fact, this method is able to deal with behavior and interaction of different states of materials (liquid and solid) and multiphase soil models and their large deformations. Soil indicates different behaviors when interacting with water, structure, instrumentations, or different layers. Thus, study into these interactions using the mesh based grids has been facilitated by mesh-less SPH technique in this work. It has been revealed that the fast development, computational sophistication, and emerge of mesh-less particle modeling techniques offer solutions for problems which are not modeled by the traditional mesh-based techniques. Also it has been found that the smoothed particle hydrodynamic provides advanced techniques for simulation of soil materials as compared to the current traditional numerical methods. Besides, findings indicate that the advantages of applying this method are its high power, simplicity of concept, relative simplicity in combination of modern physics, and particularly its potential in study of large deformations and failures.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.177-192
• /
• 2002

Computation solutions for the flow around a cube, which were generated as part of the Computational Wind Engineering 2000 Conference Competition, are compared with full-scale measurements. The three solutions shown all use the RANS approach to predict mean flow fields. The major differences appear to be related to the use of the standard $k-{\varepsilon}$, the MMK $k-{\varepsilon}$ and the RNG $k-{\varepsilon}$ turbulence models. The inlet conditions chosen by the three modellers illustrate one of the dilemmas faced in computational wind engineering. While all modeller matched the inlet velocity profile to the full-scale profile, only one of the modellers chose to match the full-scale turbulence data. This approach led to a boundary layer that was not in equilibrium. The approach taken by the other modeller was to specify lower inlet turbulent kinetic energy level, which are more consistent with the turbulence models chosen and lead to a homogeneous boundary layer. For the $0^{\circ}$ case, wind normal to one face of the cube, it is shown that the RNG solution is closest to the full-scale data. This result appears to be associated with the RNG solution showing the correct flow separation and reattachment on the roof. The other solutions show either excessive separation (MMK) or no separation at all (K-E). For the $45^{\circ}$ case the three solutions are fairly similar. None of them correctly predicting the high suctions along the windward edges of the roof. In general the velocity components are more accurately predicted than the pressures. However in all cases the turbulence levels are poorly matched, with all of the solutions failing to match the high turbulence levels measured around the edges of separated flows. Although all of the computational solutions have deficiencies, the variability of results is shown to be similar to that which has been obtained with a similar comparative wind tunnel study. This suggests that the computational solutions are only slightly less reliable than the wind tunnel.

• Wind and Structures
• /
• 제25권2호
• /
• pp.177-193
• /
• 2017

The accelerated development of new materials, technologies and construction processes, in parallel with advances in computational algorithms and ever growing computational power, is leading to more daring and innovative architectural and structural designs. The search for non-regular building shapes and slender structures, as alternative to the traditional architectural forms that have been prevailing in the building sector, poses important engineering challenges in the assessment of the strength and mechanical stability of non-conventional structures and systems, namely against highly variable actions as wind and seismic forces. In case of complex structures, laboratory experiments are a widely used methodology for strength assessment and loading characterization. Nevertheless, powerful numerical tools providing reliable results are also available today and able to compete with the experimental approach. In this paper the wind action on a free-form complex thin shell is investigated through 3D-CFD simulation in terms of the pressure coefficients and global forces generated. All the modelling aspects and calibrating process are described. The results obtained showed that the CFD technique is effective in the study of the wind effects on complex-shaped structures.

• 한국통신학회논문지
• /
• 제21권9호
• /
• pp.2385-2401
• /
• 1996

ATM망의 단대단 통신로 추적관리를 위한 모델과 추적 알고리즘을 제시하고 시뮬레이션을 통하여 이 알고리즘의 성능을 분석하였다. 제안 모델은 TINA(Telecommunication Information Networking Architecture)구조와 ODP(Open Distributed Processing)의 계산객체를 기본으로 하였다. 계산객체는 ATM 라우팅 기능을 수행하는 계산객체와 경로 추적을 수행하는 계산객체로 구성하였으며, 이들간의 관계를 기본으로 하는 수행절차를 설정하였다. 이 수행 절차는 연결된 ATM 경로를 추적함으로써 단대단 통신로를 식별하고 이러한 통신로 식별 데이타를 수집하는 과정으로 수행된다. 제안한 단대단 통신로 추적관리는 NML(Networking Management Level) 관점에서 수행되며, 이를 위한 알고리즘으로 실시간 속성과 추적기능의 무결성을 고려하여 broadeasting-with-synchronized-control과 GTM(Global Ticket Method)을 제안하였다.

• Advances in aircraft and spacecraft science
• /
• 제3권1호
• /
• pp.95-112
• /
• 2016

This paper presents the free vibration analysis of damaged beams by means of 1D (beam) advanced finite element models. The present 1D formulation stems from the Carrera Unified Formulation (CUF), and it leads to a Component-Wise (CW) modelling. By means of the CUF, any order 2D and 1D structural models can be developed in a unified and hierarchical manner, and they provide extremely accurate results with very low computational costs. The computational cost reduction in terms of total amount of DOFs ranges from 10 to 100 times less than shell and solid models, respectively. The CW provides a detailed physical description of the real structure since each component can be modelled with its material characteristics, that is, no homogenization techniques are required. Furthermore, although 1D models are exploited, the problem unknown variables can be placed on the physical surfaces of the real 3D model. No artificial surfaces or lines have to be defined to build the structural model. Global and local damages are introduced by decreasing the stiffness properties of the material in the damaged regions. The results show that the proposed 1D models can deal with damaged structures as accurately as a shell or a solid model, but with far lower computational costs. Furthermore, it is shown how the presence of damages can lead to shell-like modal shapes and torsional/bending coupling.

• Structural Engineering and Mechanics
• /
• 제45권3호
• /
• pp.323-336
• /
• 2013

With the ongoing development in the computer science areas of artificial intelligence and computational intelligence, researchers are able to apply them successfully in the construction industry. Given the complexities indeep beam behaviour and the difficulties in accurate evaluation of its deflection, the current study has employed the Adaptive Network-based Fuzzy Inference System (ANFIS) as one of the modelling tools to predict deflection for high strength self compacting concrete (HSSCC) deep beams. In this study, about 3668measured data on eight HSSCC deep beams are considered. Effective input data and the corresponding deflection as output data were recorded at all loading stages up to failure load for all tested deep beams. The results of ANFIS modelling and the classical linear regression were compared and concluded that the ANFIS results are highly accurate, precise and satisfactory.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.142-147
• /
• 2009

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication, ocean and meteorological observations. It will be tested under vacuum condition and very low temperature in order to verify thermal design of COMS. The test will be performed by using KARI large thermal vacuum chamber, which was developed by KARI, and the COMS will be the first flight satellite tested in this chamber. The purposes of thermal balance test are to correlate analytical model used for design evaluation and predicting temperatures, and to verify and adjust thermal control concept. KARI has plan to use heating plates to simulate space hot condition especially for radiator panels such as north and south panels. They will be controlled from 90K to 273K by circulating GN2 and LN2 alternatively according to the test phases, while the shroud of the vacuum chamber will be under constant temperature, 90K, during all thermal balance test. This paper presents thermal modelling including test chamber, heating plates and the satellite without solar array wing and Ka-band reflectors and discusses temperature prediction during thermal balance test.

• Interaction and multiscale mechanics
• /
• 제1권1호
• /
• pp.33-51
• /
• 2008

This paper investigates the modelling of coupled soil-structure interaction problems by domain decomposition techniques. It is assumed that the soil-structure system is physically partitioned into soil and structure subdomains, which are independently modelled. Coupling of the separately modelled partitioned subdomains is undertaken with various algorithms based on the sequential iterative Dirichlet-Neumann sub-structuring method, which ensures compatibility and equilibrium at the interface boundaries of the subdomains. A number of mathematical and computational characteristics of the coupling algorithms, including the convergence conditions and choice of algorithmic parameters leading to enhanced convergence of the iterative method, are discussed. Based on the presented coupling algorithms a simulation environment, utilizing discipline-oriented solvers for nonlinear structural and geotechnical analysis, is developed which is used here to demonstrate the performance characteristics and benefits of various algorithms. Finally, the developed tool is used in a case study involving nonlinear soil-structure interaction analysis between a plane frame and soil subjected to ground excavation. This study highlights the relative performance of the various considered coupling algorithms in modelling real soil-structure interaction problems, in which nonlinearity arises in both the structure and the soil, and leads to important conclusions regarding their adequacy for such problems as well as the prospects for further enhancements.