• 한국의류산업학회지
• /
• 제9권4호
• /
• pp.445-449
• /
• 2007

The results of warmth retaining, heat transfer and compressive elastic recovery of the five kinds of bedspread fabrics, which were produced from packing weft of 2700 denier and 3600 denier batt yarn treated with raw material of Polyester $150^D$/48 DTY, are as follows: 1) 3600 denier packing weft showed lover count in compressive elastic recovery than 2700d packing weft, so it took longer time to recover. 2) When packing weft of the same count is used, a sample of packing weft with higher density showed lower recovery. 3) It took 2700d packing weft 30min to get approximately 98% recovery in temperature $30^{\circ}C$. But, 3600d packing weft stayed under 98% recovery in the same temperature. Considering only the result of compressive elastic recovery, we should use 2700d packing weft. 4) The higher the density of packing weft is, the higher warmth retaining becomes. Although sharp increase appeared until 5min, equilibrium was kept without any increase after that time. 5) When 2700d packing weft was used, the maximum warmth retaining was approximately 60% and 64% in the conditions of density 12(thread/in) and 22(thread/in) respectively.

• 대한치과보철학회지
• /
• 제41권2호
• /
• pp.243-257
• /
• 2003

The purpose of this study was to search the influences of the increase of the contents of sodium alginate in the experimental alginates on the some mechanical properties. 3 commercial alginates were selected for the purpose of comparison of the results of experiments. 7 experimental alginates were manufactured with the rise of contents of sodium alginate from 8.8% to 18.3% with the decrease of contents of diatomaceous earth and with the constant contents of calcium sulfate 12.5%. sodium phosphate 2.2%, zinc fluoride 2.0%. Splitable metal mold with 12.5mm diameter and 20.0mm height was filled with mixed alginate to prepare the cylinder shaped specimens. Strain in compression, elastic recovery, compressive strength were tested using the ISO specification number 1563, alginate impression material. Experimental groups were 7, and 10 specimens were used for each test items and each groups. Following results were obtained ; 1. Strain in compression was decreased with the increase of sodium alginate contents (p=0.0077, r2 = 0.6302). 2. Elastic recovery was decreased with the increase of sodium alginate contents but was not significant(p=0.0639, r2=0.7449). 3. Compressive strength was increased with the increase of sodium alginate contents (p<0.0001, r2 = 0.9617). These results mean that the increase of sodium alginate contents make alginate harder but may result the increased permanent deformation.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2000년도 추계학술대회
• /
• pp.75-75
• /
• 2000

• 한국재난정보학회 논문집
• /
• 제15권2호
• /
• pp.249-258
• /
• 2019

연구목적: 본 연구에서는 서울 경기지역의 화강암을 대상으로 시추조사 시 채취된 암석 시료에서 측정된 물리적 특성 중 탄성파속도와 탄성계수로부터 암석의 일축압축강도와의 상관성을 분석하여 암석의 일축압축강도를 추정하는 것을 목적으로 한다. 연구방법: 119개의 화강암 시추 코아 시료를 대상으로 탄성파 속도와 탄성계수 그리고 일축압축강도와의 상관관계를 도출하기 위하여 실내 암석 실험을 실시하였다. 연구결과: 화강암에 대하여 탄성파속도와 일축압축강도 그리고 탄성계수와의 상호 관계를 단순회귀와 다중회귀로 분석한 결과는 전반적으로 관계식에 나타난 것처럼 신뢰도가 낮음을 확인하였다. 이는 화강암의 구성 입자가 균질하지 못하여 탄성파속도와 탄성계수를 이용한 압축강도 추정에 대한 활용성이 낮은 원인으로 사료된다. 결론: 본 연구에서 암석의 탄성파속도와 탄성계수로부터 일축압축강도를 추정하기 위한 상관관계를 분석하기 위하여 단순회귀분석과 다중회귀분석 방법을 이용하였다. 단순회귀분석은 결정계수($R^2$)가 0.61~0.67 이었으며, 다중회귀분석은 0.71로 나타났다. 따라서 다중회귀분석을 이용하여 암석의 일축압축강도를 추정할 때 다소 신뢰성이 높아질 수 있다. 또한, 향후 탄성파 속도와 탄성계수를 이용한 암석의 일축압축강도를 추정할 때 다양한 통계분석 기법(회귀분석, 인공신경망, 빅데이터 분석 등)을 활용하면 보다 신뢰성이 높은 결과를 얻을 수 있을 것으로 본다.

• 대한금속재료학회지
• /
• 제48권3호
• /
• pp.203-209
• /
• 2010

An application of the instrumented indentation technique has been expanded from the measurements of hardness and elastic modulus to the analysis of residual stress. A slope of the indentation loading curve increases (or decreases) according to compressive (or tensile) residual stress. A theoretical equation has been established for quantifying residual stress from the slope change. However, a precise observation of the remnant indents is indispensible because the theoretical approach needs actual contact information. In addition, the conventional hardness test is still used for predicting the residual stress distribution of welded joints. Thus, we observed the three-dimensional morphologies of the remnant indents formed on artificial stress states and analyzed stress effects on morphological recovery of the indents. First, a depth recovery ratio, which has been regarded as a sensitive stress indicator, did not show a clear dependency with the residual stress. Thus an analysis on volumetric recovery was tried in this study and yielded a inverse proportional behavior with the residual stress. In addition, an elastic to plastic volume recovery ratio showed more significant correlation with the residual stress.

• 대한치과보철학회지
• /
• 제41권5호
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.

• 한국의류학회지
• /
• 제33권5호
• /
• pp.701-710
• /
• 2009

This study was conducted to develop excellent insole with good thermal insulation using new materials. We investigated that aerogel/fiber composite can be used as padding materials of shoes by comparing surface shape, moisture regain, water vapor permeability, thermal insulation and compression rate of insole materials tried with nonwoven fabric padding materials and insole sold in market. The results are as follows. Surface shapes were shown that the most appropriate material for sealing aerogel/fiber composite was high density fabric as per size of particle of aerogel. Moisture regain of aerogel/fabric composite was better than nonwoven fabric padding samples. However, when compared to insole sold in market, its moisture regain was worse than those of insole merchandises. Water vapor permeability was higher in material padded with nonwoven fabric than materials padded with aerogel/fiber composite in all three kinds of sealing fabrics. Thermal conductivity of aerogel/fabric composite was lower than nonwoven fabric material regardless of sealing fabrics. Thermal insulation of aerogel/fiber composite was higher than padding material of nonwoven fabric regardless of sealing fabrics. Compression rate of nonwoven (SP1) was higher than that of aerogel/fiber composite (SP2). Compressive elastic recovery rate of SP1 was also higher than that of SP2, which its compression rate and compressive elastic recovery rate were both poor. As the above result, ultra porous aerogel/fiber composite were proved to be material of good thermal insulation with lower thermal conductivity and also compression rate was proved to be low. Therefore, we can say that aerogel/fiber composite have high possibility to be used as insole materials for cold winter shoes requiring good thermal insulation protection.

• Archives of Metallurgy and Materials
• /
• 제65권4호
• /
• pp.1341-1344
• /
• 2020

In this study, a simple and effective way to fabricate highly porous scaffolds with controlled porosity and pore size is demonstrated. Ti-7Zr-6Sn-3Mo shape memory alloy fibers were prepared through a melt overflow process. The scaffolds with porosity of 65-85% and large pores of 100-700 ㎛ in size were fabricated by sintering the as-solidified fibers. Microstructures and transformation behaviors of the porous scaffolds were investigated by means of SEM, DSC and XRD. The scaffolds were composed of β phase at room temperature. Superelasticity with the superelastic recovery strain of 7.4% was achieved by β ↔ α" phase transformation. An effect of porosity on mechanical properties of porous scaffolds was investigated by using compressive test. As the porosity increased from 65% to 85%, elastic modulus and compressive strength decreased from 0.95 to 0.06 GPa and from 27 to 2 MPa, respectively.

• 소성∙가공
• /
• 제16권7호
• /
• pp.509-515
• /
• 2007

As the springback of sheet metal during unloading may cause deviation from a desired shape, accurate prediction of springback is essential for the design of sheet stamping operations. When considering the case of a sheet metal being bent to radius $\rho$ that is such that the maximum stress induced exceed the elastic limit of the material, plastic strain in the outer surface will occur and the material will take a permanent set: but since, on removing the bending moment, the recovery of the material is not uniform across the thickness, springback will occur and the radius $\rho$ will not be maintained. Furthermore, when a tensile load being applied to each end of specimen, the tensile stress due to bending is increased and the compressive stress is decreased or cancelled and eventually the whole specimen may be in varying degree of tension. On the removal of the applied load the specimen loses its elastic strain by contracting around the contour of the block, the radius $\rho$ will be determined by the residual differential strain. Therefore in this study the springback is analytically estimated by the residual differential strains between upper and lower surfaces of greatest radius after elastic recovery, and a springback model based on the bending moment is also analytically derived for comparison purpose.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.233-238
• /
• 2002

In this paper, the characteristics of fresh and hardened recycled concrete were experimentally compared to investigate the applicability of the recycled fine aggregates with the substitution ratio. Test results show that the workability of the recycled concrete decreases with the increment of substitution ratio of the recycled fine aggregates except for type-D case which has a lower absorption ratio. Also air content was increased with increasing substitution ratio. It was found that the compressive strength and elastic modulus of recycled concrete were decreased with increasing substitution ratio of the recycled fine aggregates. And, the superplasticizer was more effective on the workability recovery of the recycled concrete.