• Structural Engineering and Mechanics
• /
• 제4권2호
• /
• pp.163-176
• /
• 1996

The tension and compression buckling behaviour of a square plate with localized zones of damage and subjected to non-uniform loading is studied using a finite element analysis. The influence of parameters such as position of damage, extent of damage, size of damage and position of load on instability behaviour are discussed. The dynamic behaviour for certain load and damage parameters are also presented. It is observed that the presence of damage has a marked effect on the static buckling load and natural frequency of the plate.

• 한국가스학회지
• /
• 제27권2호
• /
• pp.1-6
• /
• 2023

시공 편의성 및 경제성 측면에서 장점이 있는 PE배관은 국내 도시가스 분야에서 지하 매설용으로 많이 사용되고 있다. 이러한 PE배관은 유지·보수 공사 중 가스 흐름을 차단하기 위해 많은 현장에서 스퀴즈오프를 활용하고 있다. 스퀴즈오프란 PE배관을 압착하여 유체 흐름을 차단하는 방법을 말하며 물리적인 힘에 의해 배관의 변형이 일어나는 공사의 특성상 손상이 발생할 수 있다. 본 연구에서는 스퀴즈오프에 따른 PE배관의 손상방지를 위해 압축률에 따른 손상평가 및 기밀시험을 통해 적정한 압축의 범위와 사용 압력, 관경 등의 스퀴즈오프 작업 절차에 반영될 주요 사항들을 도출하였다. PE배관 손상평가를 위한 압축 실험은 압축률(20%~40%)과 사용압력 (2.8kPa, 25kPa, 70kPa), 관경(63mm, 90mm, 110mm)을 변화시키면서 실시하였다. 압축률에 따른 손상평가 결과, 과도한 압축에 따른 영향을 분석하기 위한 압축률인 45%(110mm), 73%(63mm)인 배관에서 파손이 발생하였다. 또한, 스퀴즈오프 작업 중 기밀시험은 Ar(아르곤)을 이용하여 진행되었으며, 실험결과 70kPa의 조건과 110mm 의 배관 조건에서 누출이 발생하였다. 본 연구 결과, 기밀유지를 위한 스퀴즈오프는 25kPa이하의 사용압력 및 90mm 배관을 초과하지 않는 범위의 배관에서 작업을 실시해야하며 PE배관의 손상방지를 위한 적정 압축률은 30%임을 확인하였다. 이와같은 내용을 도시가스용 PE배관의 스퀴즈오프 작업 절차에 반영할 예정이다.

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.269-275
• /
• 2012

Carbon-fiber reinforced plastic(CFRP) laminates made of nano-particle-coated carbon fibers and damaged by a simulated lightning strike were tested under compression-after-impact(CAI) mode, during which the damage progress due to compressive loading has been monitored by acoustic emission(AE). The impact damage was induced not by mechanical loading but by a simulated lightning strike. Conductive nano-particles were coated directly on the fibers, from which CFRP coupons were made. The coupon were subjected to the strikes with a high voltage/current impulse of 10~40 kA within a few ${\mu}s$. The effects of nano-particle coating and the degree of damage induced by the simulated lightning strikes on AE activities were examined, and the relationship between the compressive residual strength and AE behavior has been evaluated in terms of AE event counts and the onset of AE activity with the compressive loading. The degree of impact damage was also measured in terms of damage area by using ultrasonic C-scan images. The assessment during the CAI tests of damaged CFRP showed that AE monitoring appeared to be useful to differentiate the degree of damage hence the mechanical integrity of composite structures damaged by lightning strikes.

• Computers and Concrete
• /
• 제15권5호
• /
• pp.709-733
• /
• 2015

This work deals with a damage model formulation taking into account the unilateral effect of the mechanical behaviour of brittle materials such as concrete. The material is assumed as an initial elastic isotropic medium presenting anisotropy, permanent strains and bimodularity induced by damage evolution. Two damage tensors governing the stiffness in tension or compression regimes are introduced. A new damage tensor in tension regimes is proposed in order to model the diffuse damage originated in prevails compression regimes. Accordingly with micromechanical theory, the constitutive model is validate when dealing with unilateral effect of brittle materials, Finally, the proposed model is applied in the analyses of reinforced concrete framed structures submitted to reversal loading. The numerical results have shown the good performance of the modelling and its potentialities to simulate practical problems in structural engineering.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.21-33
• /
• 2012

This paper presents the numerical simulation of the rigid 12.6 mm diameter kinetic energy ogive-nosed projectile impact on plain and fiber reinforced concrete (FRC) targets with compressive strengths from 45 to 235 MPa, using a three-dimensional finite element code LS-DYNA. A combined dynamic constitutive model, describing the compressive and tensile damage of concrete, is implemented. A modified Johnson_Holmquist_Cook (MJHC) constitutive relationship and damage model are incorporated to simulate the concrete behavior under compression. A tensile damage model is added to the MJHC model to analyze the dynamic fracture behavior of concrete in tension, due to blast loading. As a consequence, the impact damage in targets made of plain and fiber reinforced concrete with same matrix material under same impact velocities (650 m/s) are obtained. Moreover, the damage distribution of concrete after penetration is procured to compare with the experimental results. Numerical simulations provide a reasonable prediction on concrete damage in both compression and tension.

• Steel and Composite Structures
• /
• 제47권1호
• /
• pp.121-134
• /
• 2023

This paper tested 11 concrete-encased concrete-filled steel tube (CFST) composite columns and one reinforced concrete column under combined axial compression and lateral loads. The primary parameters, including the loading system, axial compression ratio, volume stirrup ratio, diameter-to-thickness ratio of the steel tube, and stirrup form, were varied. The influence of the parameters on the failure mode, strength, ductility, energy dissipation, strength degradation, and damage evolution of the composite columns were revealed. Moreover, a two-parameter nonlinear seismic damage model for composite columns was established, which can reflect the degree and development process of the seismic damage. In addition, the relationships among the inter-story drift ratio, damage index and seismic performance level of composite columns were established to provide a theoretical basis for seismic performance design and damage assessments.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.28-44
• /
• 2002

Wavelet transformation in image compression is to offer higher image compressibility and high-quality by quantization and entropy encoding. More image quality is good that reconstructed image by wavelet calculation than acquire cosine transform. Therefore, wavelet itself is function if it is wavelet's feature, in this function, do processing applying difference scale and resolution. That is, this is not that fixed resolution has been decided like existent compression way, when it regulated scale, damage goes in pixel and picture looks like break without giving damage entirely in reflex even if magnify or curtail Decoding. Therefore, this paper is in Image that using new wavelet application compression way research that see applies comparing In each image noted this time compressing step by step with circle image compression efficiency recognize. Also, estimated quality pass through by printing of compressed image, investigated compression ratio of most suitable that get print of high quality and elevation of transmission speed.

• 소성∙가공
• /
• 제21권5호
• /
• pp.285-290
• /
• 2012

In spite of progress in predicting ductile failure, the development of a macroscopic yield criterion to describe damage evolution in HCP (hexagonal close-packed) materials remains a challenge. HCP materials display strength differential effects (i.e., different behavior in tension versus compression) in their plastic response due to twinning. Cazacu and Stewart(2009) developed an analytical yield criterion for porous material containing randomly distributed spherical voids in an isotropic, incompressible matrix that shows tension-compression asymmetry. The goal of the calculations in this paper is to investigate the effect of the tension-compression asymmetry on necking induced by void nucleation, evolution and consolidation. In order to investigate the effect of the tension-compression asymmetry of the matrix on necking and fracture initiation, three isotropic materials A, B, and C were examined with different ratios of tension-compression asymmetry. The various types of material had BCC, FCC, and HCP crystal structures, respectively. The ratio between tension and compression in plastic flow significantly influences the fracture shape produced by damage propagation as well as affecting the localized neck.

• 지질공학
• /
• 제31권2호
• /
• pp.149-163
• /
• 2021

특성이 서로 다른 화강암, 대리암 그리고 사암에 대하여 일축압축시험과 반복재하시험을 실시하여 암석의 손상특성을 분석하였다. 일축압축시험으로 암석들의 강도, 탄성상수 그리고 손상기준응력을 결정하였고 이를 반복재하시험의 결과와 비교하였다. 반복재하시험으로 측정된 암석들의 평균 강도는 일축압축시험으로 측정된 값보다 약간 작거나 유사였다. 특히 강도가 높고 공극률이 낮은 암석들이 공극률이 매우 큰 연약한 암석들에 비해 반복하중에 의한 피로현상에 더 민감하였다. 반복 재하-제하 과정에서 발생되는 암석의 영구변형률은 암종에 따라 약간의 차이는 있으나 암석의 손상상태를 파악할 수 있는 유용한 도구로 활용할 수 있다는 것을 확인하였다. 특히 응력-누적영구변형률 곡선은 화강암과 대리암에 대하여 균열손상응력을 추정할 수 있는 가능성을 보여주었다. 시험과정에 미소파괴음을 측정하여 암석의 손상상태를 판단할 수 있는 펠리시티 비를 계산하였다. 공극이 매우 많고 연약한 사암은 미소파괴음의 방출이 매우 미약하여서 펠리시티 비의 계산에 어려움이 있었다. 반면 공극이 적고 취성의 특성을 보이는 화강암과 대리임의 경우 반복재하단계에서 계산된 펠리시티 비를 통하여 암석의 균열손상응력을 추정할 수 있는 가능성을 보여주었다. 향후 더 많은 시료와 다양한 종류의 암석을 대상으로 추가적인 시험을 진행하여 공통적인 결과를 도출한다면 유사한 조건을 갖는 암반의 손상과 변형 거동을 파악하는 데 도움이 될 수 있을 것으로 판단된다.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.71-76
• /
• 2002

In this study low cycle fatigue (LCF) behavior of 12Cr steel at high temperature are described. Secondly, comparisons between predicted lives and experimental lives are made for the several sample life prediction models. Two minute hold period in either tension or compression reduce the number of cycles to failure by about a factor of two. Twenty minute hold periods in compression lead to shorter lives than 2 minute hold periods in compression. Experiments showed that life predictions from classical phenomenological models have limitations. More LCF experiments should be pursued to gain understanding of the physical damage mechanisms and to allow the development of physically-based models which can enhance the accuracy of the predictions of components. From a design point-of-view, life prediction has been judged acceptable for these particular loading conditions but extrapolations to thermo-mechanical fatigue loading, for example, require more sophisticated models including physical damage mechanisms.