• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.100-103
• /
• 1996

Presented in this study is an algorithmic procedure to obtain polyhedral model from a compound surface. The compound surface in this study denotes a collection of trimmed surfaces without topological relations. The procedure consists of two main modules: CAD data interface, and surface conversion to polyhedral model. The interface module gets geometric information from CAD databases, and makes topological information by scanning the geometric information. We are investigating CATIA system as a data source system. In the surface conversion module, a shell(compound surface with topological information) is approximated to a triangular-faceted polyhedral surface model through node sampling and triangulation steps. The obtained polyhedral model should obey the vertex-to-vertex rule and meet tolerance requirements. Since the polyhedral model has a simple data structure and geometry processing for it is very efficient and robust, the polyhedral model can be used in various applications, such as surface rendering in computer graphics, FEM model for engineering analysis, CAPP for surface machining, data generation for SLA, and NC tool path generation.

• 한국전기전자재료학회논문지
• /
• 제30권7호
• /
• pp.459-462
• /
• 2017

In this study, we design, model, and analyze a compound generator that combines the axial flux permanent magnet (AFPM,) and radial flux permanent magnet (RFPM), which is expected to increase power generation by allowing the magnets to be placed on the upper, lower, left, and right sides of the same-sized generator. Through the design, modelling, and analysis of AFPM and RFPM compound generators, the generator load evaluation results rated output of 500.25 W and efficiency of 87.60%, respectively, at a rated speed of 600 rpm. By employing this complex generation system,these findings are expected to contribute to the activation of a small power generation system.

• Journal of Mechanical Science and Technology
• /
• 제14권10호
• /
• pp.1104-1113
• /
• 2000

This paper proposes an efficient reverse engineering technique for compound surfaces using a boundary detection method. This approach consists in extracting geometric edge information using a vision system, which can be used in order to drastically reduce geometric errors in the vicinity of compound surface boundaries. Through the image-processing technique and the interpolation process, boundaries are reconstructed by either analytic curves (e. g. circle, ellipse, line) or parametric curves (B-spline curve). In other regions, except boundaries, geometric data are acquired on CMM as points inspected using a touch type probe, and then they are interpolated on several surfaces using a B-spline skinning method. Finally, the boundary edge and the skinned surfaces are combined to reconstruct the final compound surface. Through simulations and experimental works, the effectiveness of the proposed method is confirmed.

• 한국응용과학기술학회지
• /
• 제26권1호
• /
• pp.18-23
• /
• 2009

Curing behavior and structural property of an inorganic compound added urea-formaldehyde(UF) and urea-melamine-formaldehyde(UMF) were studied. In addition, tensile strength and formaldehyde emission of plywoods made of those resin binders were studied. Curing temperature and structure were not changed, but tensile strengths of plywoods manufactured both with a UF resin and a UMF resin were decreased slightly as increased amount of inorganic compound. Formaldehyde emissions from plywoods were reduced as increased amount of inorganic compound. Wheat flour as an extender was helped to reduce of formaldehyde emission. From the result of this study it might be estimated that using appropriate amount of inorganic compound and proper resin system can be strengthened bond strength and reduced formaldehyde emission.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제16권2호
• /
• pp.57-59
• /
• 2008

While searching for pancreatic lipase inhibitors, the active compound was found in a methanol extract of Apis mellifera venome. The active compound was isolated by Diaion HP-20 column chromatography, thin layer chromatography and HPLC. The active compound is stable to the extreme pH and heat. There is no loss of activity both in acidic and alkaline solution in the pH range of 2 to 11 by heating for 15 minutes at $90^{\circ}C$. The rf value of the compound was 0.51 at TLC with butanol : methanol: water (4:1:2) solvent system. The molecular weight of the compound was determined to be 293 by EI-MS.

• 한국항공운항학회지
• /
• 제18권3호
• /
• pp.1-8
• /
• 2010

A design study has been performed to obtain configuration and weight of a compound gyroplane. A study of research trends and characteristics was performed to develop the compound gyroplane sizing program. Based on these results, the sizing program has been developed and its suitability has been validated using existing compound gyroplane data. The subject air vehicles was a Challis Heliplane UAV, Carter Coptet, FB-1 Gyrodyne, and Jet Gyrodyne. As results, the program was suitable to size a compound gyroplane at conceptual design phase, because the greatest error rate was less than 10% and the conceptual design allowance error rate is less than 15%.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.427-430
• /
• 2002

Plasma nitrocarburizing treatment was performed for SCM 435 steel by using a plasma ion nitriding system. The effects of the variation of nitrogen and methan contents upon the hardened layer was investigated. Both the thickness of the compound layer and the amount of $\varepsilon$ phase in the compound layer increased with increasing nitrogen content. However, the thickness of the compound layer decreased due to unstable plasma for an atmosphere containing 90% $N_2$ gas content in the gas mixture. The amount of $\varepsilon$phase in the compound layer increased with increasing $CH_4$ gas content. For $CH_4$ gas content more than 2% in the gas mixture, the thickness of the compound layer decreased due to the formation of $\theta$ phase.

• Carbon letters
• /
• 제10권2호
• /
• pp.101-108
• /
• 2009

Various silanes, amino silane, vinyl silane, TESPD, and ZS (TESPD/zinc soap complex), are added into chlorinated isobutylene-isoprene copolymer (CIIR)/hard clay/carbon black (CB) compound and they are investigated with respect to the vulcanization characteristics, the processability, and the mechanical properties. In hard clay/CB filled system, only ZS silane added compound shows both lower Mooney viscosity and extrusion torque while vinyl silane added compound showed only a lower extrusion torque. All the ZS added compounds showed the lowest viscosity among them. The silane added compounds showed an increased modulus. In 'fatigue to failure' count test, the ZS added compound showed superior counts compared to other silane (amino, vinyl, TESPD) added compounds. The mechanical properties were significantly increased when the S2 and ZS were added into CIIR/hard clay/CB compound. The ZS added compounds showed a significant improvement on elongation modulus.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.85-92
• /
• 2014

This study carried out experimental on the cooling characteristics of clathrate compound including TMA(Tri-Methyl-Amine ; $(CH_3)_3N$) as a low temperature latent heat storage material. And additive was used for subcooling improvement of TMA-water clathrate compound. The conclusion of above study is as following ; TMA 25wt%-water clathrate compound is shown stable phase change and low subcooling degree. The subcooling was improved in the case ethanol($CH_3CH_2OH$) 0.5wt% is added to TMA 25wt%-water clathrate compound.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.845-850
• /
• 2002

In this study we consider a flow-line CONWIP System with Compound Poisson Demands. The processing times of each workstation follow a Coxian-2 distribution. The demands that are not satisfied instantaneously are either backordered or lost according to the number of backordered demands that exist at their arrival instants. For this system we develop an approxi­mation method to obtain the performance measures such as steady state probabilities of the number of parts at each station, the average number of backordered demands and the proportion of the lost demands. Comparisons with simulation have shown that the approximate method provides fairly good results.