• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.159-163
• /
• 2005

채널 내부의 비정상 흐름을 규명하기 위하여 실제 사용 중인 판형 열교환기 모델을 대상으로 가시화 실험과 입자영상유속계(PIV)를 사용한 계측을 수행하였다. 실험은 기복을 가지고 있는 채널의 높이와 내부유동의 부분 평균속도벡터에 따른 7가지 종류의 레이놀즈수를 적용하였고, 순간속도벡터분포와 유동특성을 고찰하였다. 실험에서 삼각형상 그루브 채널은 하부 채널과 채널 흐름에 의해서 받고 있는 전단응력의 그루브 흐름과의 관계에서 복합적인 흐름의 형태로 나타났다. 삼각형상 그루브와 채널 사이의 경계인 전단혼합층은 채널에서 난류강도가 상승하는 주흐름에 영향을 미쳤다.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.268-273
• /
• 2015

While analyzing the specimens before and after the thermal shock test, we found that the power drop rate of the bare cell was 5.08%, while the power drop rate of the ribboned cell was 16.49%. In comparative terms, the efficiency was lower at the ribboned cell than at the bare cell. While analyzing through EL (Electroluminescence) shots and cross sections, we tried to decipher the exact cause of the power drop. Although mere color change of the cell was observed at the surface of the bare cell, no abnormality could be found inside the cell. On the surface of the ribboned cell, the short circuit of gridfinger extended from the front part of the front electrode of the ribboned cells. Therefore, cracks occurred on the surface of the cell. Cracks also appeared inside the cell. While analyzing the I-V curve, we determined an increase in the leakage current and an increase of resistances in series in the bare cell. In the ribboned cell, the resistances in parallel reduced remarkably. An increase of resistances in series could also be verified. Conclusively, we deduced that the power drop rate in the bare cell is a life span of the cell itself; aging is the cause of power drop rate in cells. In case of ribboned cell, the power drop rate was directly influenced by internal cracks and an intermetallic compound layer joining the ribbon at the front electrode.

• 한국재료학회지
• /
• 제16권5호
• /
• pp.302-307
• /
• 2006

The formation and processing of organic insulators on the device performance have been studied in the fabrication of organic thin film transistors (OTFTs). The series of polyvinyls, poly-4-vinyl phenol(PVP) and polyvinyltoluene (PVT), were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series: PVP(10 wt%) copolymer, 5 wt% cross-linked PVP(10 wt%), PVP(20 wt%) copolymer, 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current characteristics. Finally, inverted staggered OTFTs using the PVP(20 wt%) copolymer, 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%) as gate insulators were fabricated on the polyether sulphone (PES) substrates. In our experiments, we could obtain the maximum field effect mobility of 0.31 $cm^2/Vs$ in the device from 5 wt% cross-linked PVP(20 wt%) and the highest on/off current ratio of $1.92{\times}10^5$ in the device from 10 wt% cross-linked PVP(20 wt%).

• 콘크리트학회논문집
• /
• 제19권4호
• /
• pp.475-482
• /
• 2007

콘크리트 구조물의 사용 년수 증가에 따른 열화 (aging) 방지 및 내구성능 향상을 목적으로 개발된 유무 기합성 표면 침투 보강제의 성능 및 적용성을 실험적 방법으로 입증하였다. 본 연구에서는 무기 재료인 TEOS (tetra-ethoxyorthosilicate)와 유기재료인 acrylate monomer를 용액중축합 방법으로 합성함으로써 졸-겔 반응 (sol-gel process)에 의한 실리케이트의 내구성능 향상 효과와 함께 유기모노머의 부드럽고 유연한 충격 완화층 형성을 통한 콘크리트의 성능 개선 효과와 isobutyl-orthosilicate 등의 성능 개선 물질을 추가함으로써 콘크리트 침투 후의 열화 억제 성능을 향상시켰다. 개발된 유무 기합성 표면 침투 보강제는 침투 후 콘크리트 내부 공극을 물리 화학적으로 안정된 화합물로 충진 시킴으로써 구체 강화에 따른 압축강도 증가 효과는 물론, 염해 및 탄산화, 동결융해 및 복합열화 등의 사용 환경적 열화 요인에 대한 내구성 향상 효과가 높아 콘크리트 구조물의 효율적인 수명 관리 기법으로 활용이 가능할 것으로 판단된다.

• Toxicological Research
• /
• 제26권1호
• /
• pp.37-46
• /
• 2010

This study aimed to elucidate anti-inflammatory activities from extracts of Asterina pectinifera on nitric oxide (NO) production, TNF-${\alpha}$ and IL-6 release in lipopolysaccharide (LPS)-stimulated murine macrophage cell, RAW264.7. We prepared the methanolic extracts (60-MAP, 70-MAP, 80-MAP and 90-MAP), aqueous extract (W-AP) and functional bioactive compound fraction (He-AP and EA-AP) from Asterina pectinifera according to extract method. The 60-MAP, 70-MAP, 80-MAP, 90-MAP and W-AP were significantly suppressed LPS-induced production NO, TNF-${\alpha}$ and IL-6 secretion in a concentration-dependent manner (P < 0.05). Especially, 80-MAP by extracted 80% methanol had the strongest activity in reduction of inflammatory mediators among these extracts. Indeed, to identify active fraction, which contained potential bioactive compounds, from 80-MAP of Asterina pectinifera, we tested anti-inflammatory activity of the He-AP or the EA-AP. The He-AP was next extracted from 80-MAP and the EA-AP were extracted from the other methanol layer except the He-AP. The EA-AP demonstrated a strong anti-inflammatory effect through its ability to reduce NO production and it also inhibited the production of proinflammatory cytokines such as IL-6 and TNF-${\alpha}$ at low concentration. These results suggested that the methanolic extract from Asterina pectinifera had the potential inhibitory effects on the production of these inflammatory mediators.

• 약학회지
• /
• 제41권2호
• /
• pp.161-173
• /
• 1997

Tuber of Aconitum chiisanense(Ranunculaceae) a specific medicinal plant in Korea, which is known to have the activity to recover reduced metabolism of feeble patients and has been used to symptoms such as pain, paralysis, atonia and coldness of extremities, etc. were studied. The powdered tubers of the plant were extracted with 10% EtOH 3 times and the combined extract was dissolved in 1N HCl solution and washed with ethyl acetate. The aqueous layer was basified with solid $Na_2CO_3$ and extracted with $CHCl_3$ to obtain an alkaloidal fraction. The alkaloidal fraction was subjected to column chromatography using silica gel, alumina and Sephdex LH 20, etc. From the alkaloidal fraction, five diterpene alkaloids, mesaconitine, aconitine, hypaconitine, 8-O-ethyl 14-benzoylmesaconine and talatizamine, were isolated and identified on the basis of their physico-chemical properties and spectroscopic evidences($^1H$-, $^{13}C$-NMR, EI-MS, IR, 2D-NMR) respectively. Especially the Compound IV, 8-O-ethyl 14-benzoylmesaconine, was assumed to be an artifact resulting from mesaconitine during extraction procedures. The contents of mesaconitine, aconitine and hypaconitine in the mother tuber of this plant were 0.300%, 0.024%, and 0.068%. And that of the attached tuber(new one) of this plant were 0.336%, 0.034% and 0.240% respectively.

• 공업화학
• /
• 제19권6호
• /
• pp.661-667
• /
• 2008

본 연구에서는 LCD 백라이트용 휘도향상 편광필름으로 사용하기 위해, 콜레스테릭 액정(CLC)을 합성하여 네미틱 액정과 혼합한 다음 이들이 충진된 모듈을 제작하였다. 광확산필름에 의해 면광원화된 빛을 통과시킬 때, LCD 백라이트상에서 이들의 투과광 증폭 및 편광능력에 대한 특성을 연구하였다. 합성된 콜레스테릭 액정의 특성은 UV/Visible 스펙트럼과 편광현미경(POM) 등으로 평가하였다. 여러 종류의 선형 카르복실산을 콜레스테롤 분자에 도입하여 콜레스테릭 메소젠 사이의 유연격자를 이루도록 유도하여 각 층에서 일정한 방향성을 유지하도록 하였다. 또한 CLC필름을 적층하여 가시광선대에서 편광능력, 휘도향상 및 투과파장영역을 넓히고 백라이트 유니트의 밝기를 향상시키는 모듈로 적용할 수 있었다.

• The Plant Pathology Journal
• /
• 제15권3호
• /
• pp.152-157
• /
• 1999

An antibiotic compound was isolated from the culture of an antagonist against Fusarium oxysporum f. sp. sesami, Bacillus polymyxa strain KB-8, and tested for the control of Fusarium wilt of sesame in greenhouse conditions. Optimum conditions for culturing the antagonist to obtain the maximum antibiotic activity were determined using different culture media, initial medium acidity, and incubation periods for which yeast -malt extract agar with the initial acidity of pH 5 and over 13 days culture were best. Antibiotic substances extracted by methanol had 2 main fractions, KB-8A and KB-8B, in thin layer chromatography (OLC) with Rf values of 0.35 and 0.67 in a solvent system of chloroform : methanol = 7 : 3. The fraction KB-8A wa purified further by XAD-2, silica gel and Sephadex LH-20 column chromatography, and crystalization. Its minimum inhibitory concentrations (MICs) were $12.8\mu\textrm{g}$/ml for F. oxysporum and Alternaria mali, $6.4\mu\textrm{g}$/ml for Colletotrichum gloeosporioides and Rhizoctonia solani, and $3.2\mu\textrm{g}$/ml for Phytophthora capsici. Soil drenching of antibiotic KB-8A in the concentrations of $13.0\mu\textrm{g}$/ml and $26.0\mu\textrm{g}$/ml effectively inhibited the Fusarium wilt of sesame in a greenhouse test, which appeared to be comparable to the fungicide benlate of $6.5\mu\textrm{g}$ a. i./ml.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.61-67
• /
• 2005

Since lead (Pb)-free solders for electronics have higher melting points than that of eutectic Sn-Pb solder, they need higher soldering temperatures. In order to decrease the soldering temperature we tried to coat Sn-Bi layer on $Sn-3.5\%Ag$ solder by electroplating, which applies the mechanism of transient liquid phase bonding to soldering. During heating Bi will diffuse into the $Sn-3.5\%Ag$ solder and this results in decreasing soldering temperature. As bonding samples, the 1608 capacitor electroplated with Sn, and PCB, its surface was finished with electroless-plated Ni/Au, were selected. The $Sn-95.7\%Bi$ coated Sn-3.5Ag was supplied as a solder between the capacitor and PCB land. The samples were reflowed at $220^{\circ}C$, which was lower than that of normal reflow temperature, $240\~250^{\circ}C$, for the Pb-free. As experimental result, the joint of $Sn-95.7\%Bi$ coated Sn-3.5Ag showed high shear strength. In the as-reflowed state, the shear strength of the coated solder showed 58.8N, whereas those of commercial ones were 37.2N (Sn-37Pb), 31.4N (Sn-3Ag-0.5Cu), and 40.2N (Sn-8Zn-3Bi). After thermal shock of 1000 cycles between $-40^{\circ}C$ and $+125^{\circ}C$, shear strength of the coated solder showed 56.8N, whereas the previous commercial solders were in the range of 32.3N and 45.1N. As the microstructures, in the solder $Ag_3Sn$ intermetallic compound (IMC), and along the bonded interface $Ni_3Sn_4$ IMC were observed.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.86-91
• /
• 2005

층상 구조의 유기-무기 페로브스카이트 복합 소재 $(C_nH_{2n+1}NH_3)_2CuC1_4$ (n=6, 8, 10, 12)을 합성하였다. $(C_nH_{2n+1}NH_3)_2CuC1_4$ 화합물에서 긴 사슬의 양성자화된 알킬 암모늄 이온은 기울어진 이중층의 구조로 $CuCl_6$ 팔면체의 구석을 공유하고 있는 페로브스카이트형의 층들 사이에의 삽입되었다. 페로브스카이트 층상 화합물에서의 3개의 고체상을 HT-XRD와 DSC를 사용하여 조사하였다. $(C_nH_{2n+1}NH_3)_2CuC1_4$ 화합물은 단계적인 층간거리의 증가와 함께 고체-고체 상전이 현상을 보여준다 3개의 다른 구조는 긴 사슬의 양성자화된 알킬 암모늄 이온의 형태 변화로 설명하였다.