• Steel and Composite Structures
• /
• 제29권1호
• /
• pp.77-90
• /
• 2018

This paper presents a combined numerical, experimental, and theoretical study on the behavior of the concrete-filled double circular steel tubular (CFDT) stub columns under axial compressive loading. Four groups of stub column specimens were tested in this study to find out the effects of the concrete strength, steel ratio and diameter ratio on the mechanical behavior of CFDT stub columns. Nonlinear finite element (FE) models were also established to study the stresses of different components in the CFDT stub columns. The change of axial and transverse stresses in the internal and external steel tubes, as well as the change of axial stress in the concrete sandwich and concrete core, respectively, was thoroughly investigated for different CFDT stub columns with the same steel ratio. The influence of inner-to-outer diameter ratio and steel ratio on the ultimate bearing capacity of CFDT stub columns was identified, and a reasonable section configuration with proper inner-to-outer diameter ratio and steel ratio was proposed. Furthermore, a practical formula for predicting the ultimate bearing capacity was proposed based on the ultimate equilibrium principle. The predicted results showed satisfactory agreement with both experimental and numerical results, indicating that the proposed formula is applicable for design purposes.

• Korean Chemical Engineering Research
• /
• 제49권1호
• /
• pp.120-127
• /
• 2011

친환경 복합단열재를 개발하기 위하여 천연섬유질(목재칩 및 톱밥)을 심재로, 활성황토를 결합재로 사용하였다. 물/결합재비 및 천연섬유질/결합재비를 다양하게 변화시켜 공시체를 제작하였으며, 공시체의 제 물성을 조사하기 위하여 압축 및 휨강도, 흡수성, 내열수성, 열전도도, 세공분포측정 및 SEM에 의한 미세조직 관찰을 실시하였다. 그 결과 흡수율은 천연섬유질/결합재비가 증가될수록 증가되었으나 폴리머/결합재비 증가에 따라 현저히 감소되었다. 압축 및 휨강도는 물/결합재비 및 천연섬유질/결합재비에 따라 다양한 특성을 나타내었다. 천연섬유질/결합재비 및 폴리머/결합재비가 증가됨에 따라 열전도도는 감소되었다. SEM조사에서 활성황토 결합재는 수화결정체가 잘 형성되어 치밀한 조직을 관찰할 수 있었고, 활성황토를 결합재로 사용한 시편의 총세공량은 생황토를 결합재로 사용한 시편의 총세공량에 비하여 적게 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.951-954
• /
• 2010

There are lots of soft ground improvement methods which is consist of different materials. In the analysis and design, composite ground method is usually regarded. Composite ground method considers the area replacement ratio as a key parameter to combine the physical and mechanical characteristics of tow different material. In this study, using composite material consist of three different materials which have different diameters, series of specific gravity test were performed according to KS F 2308, to investigate the applicability of composite ground method. As a result, it is found that composite material which is consist of fine grained soil and granular soil has a high applicability of composite ground method. This result means that, in estimating of ground properties of composite material which is consist of similar fine grained material such as cement mixing etc., composite ground method has a less applicability.

• 한국지반환경공학회 논문집
• /
• 제15권8호
• /
• pp.51-58
• /
• 2014

본 연구에서는 원지반 점토와 시멘트 혼합토를 포함하는 복합지반을 조성하고 이에 대한 실내 일축압축강도 시험을 통해 원지반 점토 함수비 및 치환율, 시멘트 함유율 등에 따른 강도 및 변경 특성치를 분석하였으며, 혼합토에 대한 개별요소 수치모델링을 수행하였다. 시멘트 함유율 15 % 이상에서는 최종적인 복합지반의 강도에 있어 치환율을 증가시키는 것보다 시멘트 함유량 증가 등을 통한 혼합토의 강도를 증가시키는 것이 더욱 유리함을 알 수 있었으며, 회귀분석을 통해 원지반 점성토의 일축압축강도와 시멘트 혼합토의 시멘트 함유율, 복합지반 치환율을 이용하여 최종적인 복합지반의 일축압축강도 및 탄성계수 예측이 가능하였다. 치환율과 함께 최종적인 복합지반의 강도 및 변형 특성치 예측에 가장 중요한 요소인 시멘트 혼합토의 일축압축강도는 실내시험 및 본딩모델이 적용된 3차원 개별요소 수치모델링을 통해 그 검증과 예측이 가능하였다.

• 대한토목학회논문집
• /
• 제37권3호
• /
• pp.521-529
• /
• 2017

본 연구에서는 합성형교와는 다른 전단연결 상세를 가지는 콘크리트 비충전 강합성 바닥판의 유효폭을 수치적으로 분석하였다. 유효폭 산정 방법 및 위치, 작용하중 크기, 메인 베아링 바 간격-지간장비에 따른 콘크리트 비충전 강합성 바닥판의 유효폭을 평가하였다. 분석 결과 응력 형태를 사다리꼴로 이상화하여 유효폭을 산출하여도 실제 유효폭과 거의 동일한 것으로 분석되었다. 또한, 전단 강도 증가를 위해 적용된 전단홀 관통 철근이 유효폭을 증가 시키는 역할을 하는 것으로 나타났다. 메인 베아링 바 간격-지간장비에 따른 유효폭 분석 결과로부터 콘크리트 비충전강합성 바닥판의 유효폭비를 산출 할 수 있는 보정 계수를 제안하였다.

• Steel and Composite Structures
• /
• 제36권2호
• /
• pp.187-196
• /
• 2020

Double skin composite wall system owns several structural merits in terms of high load-carrying capacity, large axial stiffness, and favorable ductility. A recently proposed form of truss connector was used to bond the steel plates to the concrete core to achieve good composite action. The structural behavior of rectangular high walls under compression and T-shaped high walls under eccentric compression has been investigated by the authors. Furthermore, the influences of the truss spacings, the wall width, and the faceplate thickness have been previously studied by the authors on short walls under uniform compression. This paper experimentally investigated the effect of width-to-thickness ratio on the compressive behavior of short walls. Compressive tests were conducted on three short specimens with different width-to-thickness ratios. Based on the test results, it is found that the composite wall shows high compressive resistance and good ductility. The walls fail by local buckling of steel plates and crushing of concrete core. It is also observed that width-to-thickness ratio has great influence on the compressive resistance, initial stiffness, and strain distribution across the section. Finally, the test results are compared with the predictions by modern codes.

• Composites Research
• /
• 제12권2호
• /
• pp.10-25
• /
• 1999

Fragmentation 시험법에 의한 섬유상 복합재료의 계면적 특성에 대한 새로운 평가방법이, 순차적으로 섬유간의 간격이 변하게 된 단계적 다섬유 복합재료를 사용하여 제시되었다. 섬유간의 간격이 증가함에 따라, 부서진 섬유들의 형상비는 감소하였으며, 섬유와 기지간의 계면전단강도는 증가함을 보여주었다. 섬유간 거리의 역수를 취했을 때에, 형상비와 계면전단강도 모두가 포화되는 값을 보여주었다. 이것은 단계적 다섬유 복합재료가 형상비에서의 상한값을 나타내고, 계면전단강도에서 하한값을 보여준다는 것을 의미한다. 이 fragmentation 시험법은 복합재료의 평가에 새로운 방법이 될 수 있다. 왜냐하면, 이 두 한계값의 차이를 줄이는 것이 복합재료의 강화에 효과적이기 때문이다. 또한, 섬유 파괴점 부근에서의 섬유응력 분포와 위의 결과를 관련시키기 위해 탄송-소성 유한요소 해석이 행해졌다. 단계적 다섬유 복합재료 시험에서 얻어진 한계값은 그룹형태의 다 섬유 파괴에 의해 야기된 응력집중과 밀접하게 관련되어 있다는 것이 입증되었다.

• Steel and Composite Structures
• /
• 제25권1호
• /
• pp.105-116
• /
• 2017

This paper presents the dynamic stability study of laminated composite plates with different force combinations and aspect ratios. Optimum non-diverging stacking is obtained for certain loading combination and aspect ratio. In addition, the stability force is maximized for a definite operating frequency. A dynamic version of the principle of virtual work for laminated composites is used to obtain force-frequency relation. Since dynamic stiffness governs the divergence or flutter, an efficient optimization method is necessary for the response functional and the relevant constraints. In this way, a model based on the ant colony optimization (ACO) algorithm is proposed to search for the proper stacking. The ACO algorithm is used since it treats with large number of dynamic stability parameters. Governing equations are formulated using classic laminate theory (CLT) and von-Karman plate technique. Load-frequency relations are explicitly obtained for fundamental and secondary flutter modes of simply supported composite plate with arbitrary aspect ratio, stacking and boundary load, which are used in optimization process. Obtained results are compared with the finite element method results for validity and accuracy convince. Results revealed that the optimum stacking with stable dynamic response and maximum critical load is in angle-ply mode with almost near-unidirectional fiber orientations for fundamental flutter mode. In addition, short plates behave better than long plates in combined axial-shear load case regarding stable oscillation. The interaction of uniaxial and shear forces intensifies the instability in long plates than short ones which needs low-angle layup orientations to provide required dynamic stiffness. However, a combination of angle-ply and cross-ply stacking with a near-square aspect ratio is appropriate for the composite plate regarding secondary flutter mode.

• 복합신소재구조학회 논문집
• /
• 제4권2호
• /
• pp.31-38
• /
• 2013

As the Sewer Pipe is transformed by the expansion of life cycle as a result of the technology development, flexible pipe is developed by the transformed environmental conditions. To change pipe design, three phases(compaction ration - inner deflection ratio - ring stiffness) should be considered in design conditions. The input data of pipe design were provided by compaction-inner deflection ratio-ring stiffness. M oreover, The guidelines of sewerage pipes should be considered by flexible pipes design criteria.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.58-64
• /
• 1997

A micromechanics model to describe the elastic behavior of fiber or whisker reinforced metal matrix composites was developed and the stress concentrations between reinforcements were investigated using the modified shear lag model with the comparison of finite element analysis (FEA). The rationale is based on the replacement of the matrix between fiber ends with the fictitious fiber to maintain the compatibility of displacement and traction. It was found that the new model gives a good agreement with FEA results in the small fiber aspect ratio regime as well as that in the large fiber aspect ratio regime. By the calculation of the present model, stress concentration factor in the matrix and the composite elastic modulus were predicted accurately. Some important factors affecting stress concentrations, such as fiber volume fraction, fiber aspect ratio, end gap size, and modulus ratio, were also discussed.