• 전산구조공학
• /
• 제10권2호
• /
• pp.225-232
• /
• 1997

서로 다른 기지의 성질을 갖는 재료들을 혼합하여 만든 합성재료의 새로운 물성치는 일반적으로 실험으로 규명하고 있다. 혼합하는 재료들의 체적비에 따라 실험으로 측정한 합성재료의 탄성계수와 포와송비는 그 합성재료로 만들어지는 구조물의 역학적 거동을 예측하는 해석적 모델의 기본자료로 사용된다. 합성재료 탄성물성치의 수치적 예측은 합성재료에 대한 유한요소 모델로 해석한 정적변위와 균질.등방성으로 가정한 모델을 해석한 정적변위와의 차이를 최소화하는 구속적 비선형 최적화기법을 사용하여 수행하였다. 유한요소 모델은 체적비에 따라 혼합물질을 분배하기 용이하도록 제안하였으며 구속조건 및 하중조건은 일축인장에 의한 거동을 예측하도록 설정하였다. 본 논문에서는 고체입자를 섞어 만든 합성재료의 탄성물성치를 예제를 통하여 수치적으로 예측하고 그 결과를 실험결과 및 이론식들과 비교.검토하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.251-257
• /
• 1999

Smart structure that contains sensors, which are either embedded in a composite material or attached to a structure, is currently receiving considerable attention. Fiber Bragg grating sensor, one of the optical fiber sensors, has been widely used to sense strain and temperature for smart structures since both parameters change the resonant frequency of the grating. In this paper, according to the various heating and cooling conditions the thermal behavior of unidirectional composite material was monitored by embedding the fiber Bragg grating sensors in the longitudinal and transverse directions of unidirectional composites. The thermal behavior of unidirectional composite material was monitored for various heating and cooling rates and applied pressure. It was found that the thermal behavior was unaffected by pressure variations and heating and cooling rates applied to the composites. The thermal strains were measured by considering the shift in Bragg wavelength that was generated by the thermal expansion of composite specimen. The longitudinal and transverse C.T.E.'s were also obtained from the corresponding temperature-thermal strain curves.

• Composites Research
• /
• 제15권5호
• /
• pp.1-6
• /
• 2002

하이브리드 복합재료는 FRP나 MMC와 같은 복합재료에 비하여 높은 비강도, 내피로 특성을 가지고 있기 때문에 많은 관심을 받고 있다. 그러나 하이브리드 복합재료는 금속과 FRP의 결합구조로 되어있기 때문에 매우 복잡한 파손기구를 가지고 있다. 최근에는 비파괴 기법을 이용하여 이러한 복합재료의 파손기구를 평가하고자 하는 연구가 수행되어지고 있다. 본 연구에서는 음향방출 기법을 이용하여 Al7075/CFRP 하이브리드 복합재료에 대한 손상정도 및 파손기구를 명확히 하고자 하였다. 특히 AE 사상수, 에너지, 진폭과 같은 AE 파라미터들은 Al7075/CFRP 하이브리드 복합재료의 파손과정을 평가하는데 효과적이었다. 더불어, 광학현미경을 이용하여 AE 신호와 시험편의 표면소상 특성과의 관계를 비교, 검토하였다.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.1-7
• /
• 2018

The multi-scale analysis is more proper and precise for composite materials because of considering the individual microscopic structure and properties of each material for composite materials. The purpose of this study is to verify the validity of using palladium particles in carbon/fiber composites by multi-scale analysis. The palladium is a material for itself to detect leaking hydrogen by using the property of adsorbing hydrogen. The macroscopic model material properties used in this study are homogeneous material properties from microstructure. Homogenized material properties that are calculated from periodic boundary conditions in the microscopic representative volume element model of each macroscopic analysis model. In this study, three macroscopic models were used : carbon fiber/epoxy, carbon fiber/palladium, palladium/epoxy. As a result, adding palladium to carbon/epoxy composite is not a problem in terms of strength.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.882-885
• /
• 2001

This paper aims to investigate the characteristics of braided thermoplastic composite and pressure relief for polymer arrester. In general, braided composite has potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was decided. And polymer arrester module was manufactured with braid.

• 복합신소재구조학회 논문집
• /
• 제1권4호
• /
• pp.6-12
• /
• 2010

This study investigates how to apply composite material to the blast loading protection devices, mainly used for military purpose. Traditionally, earth-filled blast walls have been used for protecting important parts of military facilities and personnels. However these types of blast walls show difficulty in fabrication and portability because of their nature of heavy weight. Composite materials are known to have relatively higher specific stiffness and strength than any other metallic and earth-filled materials such as sand and gravels. Totally 4 times of TNT blast experiments were performed on the carbon/epoxy blast walls. After the end of each test, the improvement of blast wall was implemented to the structure. The test results show that the use of composite material in the blast protecting area is the one of very effective and reliable alternatives.

• 전기화학회지
• /
• 제10권2호
• /
• pp.141-144
• /
• 2007

Polypyrrole(PPy) was composite with MWNT to attain cycle stable by chemical method. We have been considered PPy is the ideal material for high energy density electrochemical capacitor due to pseudo capacitor reaction. In this study we found that increase in cycle life due to composite MWNT. Also PPy/MWNT composite material have resulted larger capacitance and exhibits better electrochemical behavior. The structural feature was investigated by using SEM and TEM. The PPy/CNT composite is not only a promising ultracapacitor material for energy storages but also has a good possibility because of its great capacitive properties, simple preparation and low cost.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.254-258
• /
• 2003

Electronic Speckle Pattern for quantitative evaluation of a impact defect inside of composite material plate are described. The impact on composite material makes inside delamination which is difficult to detect visual inspection and ultrasonic testing due to non-homeogenous structure. This paper proposes the quantitative evaluation technique of defects under real impact. Artificial defects are designed inside of composite plate for development of inspection technique and real defects under impact are inspected and compared with results of visual inspection.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.69-73
• /
• 2004

A series of $H_3PO_4$-doped composite membranes based on poly(vinyl alcohol)(PVA) and silica have been prepared by sol-gel process. The proton conductivity, as well as properties of swelling, methanol permeation, was measured in this study. The proton conductivity increased with the molar ratio of $H_3PO_4$ to silica. With the silica content increasing, swelling degree decreased and methanol permeability showed a slight increase. It suggested that the former was mainly determined by hydrophilicity of the membrane, while the latter was dominated by the interconnectivity of matrix. According to the value of on, the optimal conformations of these composite membranes were 60, 70, 80 wt.$\%$ of PS-x in membranes, where x were 1.5, 1.0, and 0.5, respectively. These composite membranes were thermal stability up to $200^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.359-362
• /
• 2000

The purpose of this study is to research and develop graphene composite for lithium polymer battery. VO(graphene) composite is one of the promising material as a electrode active material for lithium polymer battery(LPB). We investigated AC impedance response and charge/discharge cycling of VO(graphene)/SPE/Li cells. The first discharge capacity of VO(graphene) cathode with 50wt.% V$_2$O$\sub$5/ was 150mAh/g, while that of VO(graphene) cathode with 85wt.% V$_2$O$\sub$5/ was 248mAh/g. The Ah efficiency was above 98% after the 2nd cycle. The discharge capacity of VO(graphene) anode with 3wt.% V$_2$O$\sub$5/ was 718 and 266mAh/g at cycle 1 and 10 at room temperature, respectively. The VO(graphene) anode with 3wt.% V$_2$O$\sub$5/ in PVDF-PAN-PC-EC-LiC1O$_4$ electrolyte showed good capacity with cycling.