• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.323-328
• /
• 2006

Dentinogenesis imperfecta is an inheritable disease of dentinal defect, generally is inherited as a single autosomal dominant trait. It has a prevalence of 1 in 8000 with the trait, and no significant difference between male and female, with involvement of the primary and permanent teeth. Shields proposed three types of Dentinogenesis imperfecta. Affected teeth have various discoloration, separation of enamel rapid destruction of underlying dentin, and severe attrition. Radiographically, the teeth have cervical constriction, bulbous crown, thin root, obliteration of the root canals and pulp chambers, and periapical lesions in a sound tooth. The objective of treatment is rehabilitation of the esthetics, the masticatory function, and the vertical dimension of occlusion. In these cases, two pediatric patients reported to the Kyungpook University Pediatric clinic, with a chief complaint of discolored teeth and severe attrition. As a result of clinical and radiographic exam, it was diagnosed as Dentinogenesis imperfecta. The posterior teeth were restored with Stainless Steel Crown, and the anterior teeth were restored with composite resin veneering.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.69-76
• /
• 2008

Three failure cases of CNG composite vessels were reported since after January 2005. The 1st and 2nd accidents were indebted to vessel defect and installation mistake. The 3rd was caused by gas leak at pipe connections. In this paper various aspects were studied based on information of the three failure analysis, which must be improved for better safety of the CNG bus system. Overpressure region caused by vessel explosion was theoretically predicted and also assessed by PHAST program. Explosion of 120 l vessel under 20 MPa is equivalent to 1.2 kg TNT explosion. The predicted value by PHAST was more serious than theoretical one. However, actual consequence of explosion was much less than both of the predicted consequences. Since the CNG vessel was designed by the performance based design methodology, it is difficult to verify whether the required process and tests were properly conducted or not after production. If material toughness is not enough, the vessel should be weak in brittle fracture at early in the morning of winter season since the metal temperature can be lower than the transition temperature. If autofrettage pressure is not correct, fatigue failure due to tensile stress during repeated charging is possible. One positive aspect is that fire did not ocurred after vessel failure. This may be indebted to fast diffusion of natural gas which hindered starting fire.

• Steel and Composite Structures
• /
• v.50 no.6
• /
• pp.705-720
• /
• 2024

Analyzing the collapse behavior of thin-walled steel structures holds significant importance in ensuring their safety and longevity. Geometric imperfections present on the surface of metal materials can diminish both the durability and mechanical integrity of steel shells. These imperfections, encompassing local geometric irregularities and deformations such as holes, cavities, notches, and cracks localized in specific regions of the shell surface, play a pivotal role in the assessment. They can induce stress concentration within the structure, thereby influencing its susceptibility to buckling. The intricate relationship between the buckling behavior of these structures and such imperfections is multifaceted, contingent upon a variety of factors. The buckling analysis of thin-walled steel shell structures, similar to other steel structures, commonly involves the determination of crucial material properties, including elastic modulus, shear modulus, tensile strength, and fracture toughness. An established method involves the emulation of distributed geometric imperfections, utilizing real test specimen data as a basis. This approach allows for the accurate representation and assessment of the diversity and distribution of imperfections encountered in real-world scenarios. Utilizing defect data obtained from actual test samples enhances the model's realism and applicability. The sizes and configurations of these defects are employed as inputs in the modeling process, aiding in the prediction of structural behavior. It's worth noting that there is a dearth of experimental studies addressing the influence of geometric defects on the buckling behavior of cylindrical steel shells. In this particular study, samples featuring geometric imperfections were subjected to experimental buckling tests. These same samples were also modeled using Finite Element Analysis (FEM), with results corroborating the experimental findings. Furthermore, the initial geometrical imperfections were measured using digital image correlation (DIC) techniques. In this way, the response of the test specimens can be estimated accurately by applying the initial imperfections to FE models. After validation of the test results with FEA, a numerical parametric study was conducted to develop more generalized design recommendations for the stainless-steel shell structures with the initial geometric imperfection. While the load-carrying capacity of samples with perfect surfaces was up to 140 kN, the load-carrying capacity of samples with 4 mm defects was around 130 kN. Likewise, while the load carrying capacity of samples with 10 mm defects was around 125 kN, the load carrying capacity of samples with 14 mm defects was measured around 120 kN.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.226-237
• /
• 2005

Purpose : Extensive defect of oral and maxillofacial area is usually reconstructed with composite flap including skin paddle. However, if the defects are lined with only skin components, the mucosa's role in mastication and texture are not restored. Furthermore, stiffness and hair-growing prevent denture rehabilitation and good oral hygiene. This study was performed to overcome the disadvantages of composite soft tissue flaps including the skin and to make a model for myo-mucosal flaps. Materials and methods : Buccal mucosa sized $0.5\times1.0\;cm^2$ from New Zealand rabbit (around 1.5kg) was harvested and cultivated by the modification of Rheinwald and Green's keratinocyte culture method. Cultured mucosa was grafted on the fascia of latismus dorsi as form of mucosal sheet. After 7, 10, 14 days, the myomucosal flap was excised and evaluated under light microscope with H & E and immunohistochemical staining. As control group, harvested buccal mucosa from rabbit was transplanted to gracilis muscle(n=6). Results : From 7 days after prelamination, the basal layer of the grafted mucosa resembled that of normal mucosa. As control group, transplanted mucosa had original shape but there's slight inflammatory reaction. Prelaminated mucosa has 19.8$\pm$4.59 cell layers and some samples have more than 20 layers. The expression rate of PCNA was relatively strong (42.9%$\pm$14.1) at the basal layer of grafted mucosa and the laminin was found at the basal layer. On the contrary, prelaminated mucosa at 10 days showed moderate expression rate of PCNA(32.4%$\pm$4.62). We found the mucosal layer was somehow disappeared and there is strong inflammatory reaction. After 14 days prelamination, the grafted oral keratinocytes were almost disappeared and expression of PCNA was not observed. Conclusion : We can make 75 fold large mucosal($3850mm^2$) sheet from small samples of mucosa $(50mm^2)$. Epithelial sheet that grafted on the fascia of muscle underwent differentiation and proliferation. But after 10, 14 days, there was strong inflammatory reaction and the grafted mucosa was destroyed from surface layer. In rabbit model, transfer of fascio-mucosal flap should be done from 7 to 10 days after prelamination.

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.605-624
• /
• 1996

Various bonegraft materials and the technique of guided tissue regeneration have been used to regenerate lost periodontal tissue. Calcium sulfate has been known as a bone graft material because of good biocompatibility, rapid resorption and effective osteoinduction. It has been known that calcium sulfate works as a binder to stabilize the defect when it is used with synthetic graft materials. The effects on the regeneration of pericxiontal tissue were studied in dogs after grafting 3-wall intrabony defects with calcium carbonate and calcium sulfate and covering with calcium sulfate barrier. The 3-wall intrabony defectstdmm width, 4mm depth, 4mm length) were created in anterior area and treated with flap operation alone(contol group), with porous resorbable calcium carbonate graft alonetexperirnental group 1), with calcium sulfate graft alonetexperimental group 2) and with composite graft of 80% calcium carbonate and 20% calcium sulfate with calcium sulfate barriertexperimental group 3). Healing responses were histologically observed after 8 weeks and the results were as follows: 1. The alveolar bone formation was $0.59{\pm}0.19mm$ in the control group, $1.80{\pm}0.25mm$ in experimental group 1, $1.61{\pm}0.21mm$ in experimental group 2 and $1.94{\pm}0.11mm$ in experimental group 3 with statistically significant differences between control group and all experimental groups(P<0.05). There were statistically significant differences between experimental group 1 and group 2 (P<0.05). 2. The new cementum formation was $0.48{\pm}0.19mm$ in the control group. $1.72{\pm}0.26mm$ in experimental group 1, $1.43{\pm}0.17mm$ in experimental group 2, $1.89{\pm}0.15mm$ in experimental group 3 with statiscally significant differences between control group and all experimental groups (p<0.05). There were statistically significant differences between experimental group 1 and group 2, and between experimental group 2 and group 3(P<0.05). 3. The length of junctional epithelium was $1.61{\pm}0.20mm$ in the contol group, $0.95{\pm}0.06mm$ in experimental group 1, $1.34{\pm}0.16mm$ in experimental group 2, $1.08{\pm}0.11mm$ in experimental group 3 with statiscally significant differences between control group and experimental group 1. and btween control group and experimental group 3(p<0.05). There were statistically significant differences between experimental group 1 ,and group 2, and between experimental group 2 and group 3(P<0.05). 4. The connective tissue adhesion was $1.67{\pm}O.20mm$ in the control group, $1.33{\pm}0.24mm$ in experimental group 1. $1.23{\pm}0.16mm$ in experimental group 2, $1.08{\pm}0.14mm$ in experimental group 3 with statistically significant differences between control group and all experimental groups(p<0.05). There were nostatistically significant differences between all experimental groups. As a result, epithelial migration was not prevented when calcium sulfate was used alone, but new bone and cementum formation were enhanced. Epithelial migration was prevented and new bone and cementum formation were also enhanced when calcium carbonate was used alone and when both calcium carbonate and calcium sulfate were used.

• The Journal of the Korean bone and joint tumor society
• /
• v.9 no.1
• /
• pp.124-129
• /
• 2003

Purpose: To analyze the clinical outcome and radiological features after surgical treatment of stage III giant cell tumor around the knee. Materials and Methods: 21 patients with stage III giant cell tumor around the knee joint, who were operated at our institutes between March 1991 and February 2000, were selected for this study. The average follow-up was 5.7 years (range, 1~9 years). After thorough curettage using high speed burr, cryosurgery and cementing with polymethymethacrylate (PMMA) were performed in 11 patients. 7 patients were treated with PMMA cementing (4 patients) or bone grafting (3 patients) after curettage without cryosurgery. Reconstruction with prosthesis composite allograft and knee fusion with Huckstep nail were performed in 3 patients with huge defect and joint perforation. Results: Local recurrence developed in 1 out of 11 patients who was treated with curettage and cementing with cryosurgery (9.1%) and 3 out of 7 patients who underwent curettage and cementing without cryosurgery (28.6%). Joint space narrowing more than 3mm was noted in 1 patient (9.1%), who treated with cryosurgery and anther patient (14.5%) who treated without cryosurgery. There was no local recurrence in case of wide resection and reconstruction. Conclusion: Thorough curettage and PMMA cementing with cryosurgery as an adjuvant is thought to be effective modalities in the treatment of stage 3 giant cell tumors around the knee. Wide resection and reconstruction can be reserved mainly for the cases of stage 3 giant cell tumor with significant cortical destruction and marked joint destruction, and the cases of local recurrence with poor bone stock.